Hybrid simulation of a zipper‐braced steel frame under earthquake excitation

Hybrid simulation is a testing methodology that combines laboratory and analytical simulation to evaluate seismic response of complex structural framing systems. One or more portions of the structure, which may be difficult to model numerically or have properties that have not been examined before, are tested in one or more laboratories, whereas the remainder of the structure is modeled in software using one or more computers. These separate portions are assembled such that combined dynamic response of the hybrid model to excitation is computed using a time‐stepping procedure. A hybrid simulation conducted to examine the seismic response of a type of steel concentrically braced frame, the suspended‐zipper‐braced frame, is presented. The hybrid simulation testing architecture, hybrid model, test setup, solution algorithm, and the seismic response of the suspended‐zipper‐braced frame hybrid model are discussed. Accuracy of this hybrid simulation is examined by comparing hybrid and computer‐only simulations and the errors are quantified using an energy‐based approach. This comparison indicates that the deployed hybrid simulation method can be used to accurately model the seismic response of a complex structural system such as the zipper‐braced frame. Copyright © 2008 John Wiley & Sons, Ltd.     

Effect of abutment modeling on the seismic response of bridge structures

Abutment behavior significantly influences the seismic response of certain bridge structures. Specifically in the case of short bridges with relatively stiff superstructures typical of highway overpasses, embankment mobilization and inelastic behavior of the soil material under high shear deformation levels dominate the response of the bridge and its column bents. This paper investigates the sensitivity of bridge seismic response with respect to three different abutment modeling approaches. The abutment modeling approaches are based on three increasing levels of complexity that attempt to capture the critical components and modes of abutment response without the need to generate continuum models of the embankment, approach, and abutment foundations. Six existing reinforced concrete bridge structures, typical of Ordinary Bridges in California, are selected for the analysis. Nonlinear models of the bridges are developed in OpenSees. Three abutment model types of increasing complexity are developed for each bridge, denoted as roller, simplified, and spring abutments. The roller model contains only single-point constraints. The spring model contains discrete representations of backfill, bearing pad, shear key, and back wall behavior. The simplified model is a compromise between the efficient roller model and the comprehensive spring model. Modal, pushover, and nonlinear dynamic time history analyses are conducted for the six bridges using the three abutment models for each bridge. Comparisons of the analysis results show major differences in mode shapes and periods, ultimate base shear strength, as well as peak displacements of the column top obtained due to dynamic excitation. The adequacy of the three abutment models used in the study to realistically represent all major resistance mechanisms and components of the abutments, including an accurate estimation of their mass, stiffness, and nonlinear hysteretic behavior, is evaluated. Recommendations for abutment modeling are made.     

A model-order reduction framework for hybrid simulation based on component-mode synthesis

Testing of stiff physical substructures (PSs) still poses major technical issues that prevent from adopting hybrid simulation (HS) as a standard structural testing method. Firstly, elastic deformation of reaction frames, as well as the limited resolution of displacement transducers, deteriorate displacement control accuracy. Secondly, as a consequence of control errors, small perturbations of actuator displacements entail large restoring force oscillations that spuriously excite the higher eigenmodes of the hybrid model. For this reason, in the current practice, force-controlled hydraulic jacks handle vertical degrees of freedom, which are typically associated with stiff axially loaded members and excluded from the time integration loop. Vertical forces are either kept constant or adjusted during the experiment based on simplified redistribution rules. Besides deterioration of displacement control accuracy, stiff PSs naturally increase the frequency bandwidth of the hybrid model, whose higher eigenfrequencies (divided by the testing time scale) may fall outside the frequency bandwidth of the actuation system, thus destabilizing the HS. This is a collateral issue to which, in the authors' knowledge, no sufficient attention as been dedicated yet, and this paper tries to address it. From this standpoint, we propose component-mode synthesis as a rigorous approach for deriving reduced-order physical and numerical substructure mass and stiffness matrices that minimize the frequency bandwidth of the hybrid model. The proposed methodology allowed for performing HSs of a load-bearing unreinforced masonry structure including both horizontal and vertical degrees of freedom with a standard three-actuator setup used for cyclic testing.     

Rolling and rocking of rigid uplifting structures

Allowing structures to uplift modifies their seismic response; uplifting works as a mechanical fuse and limits the forces transmitted to the superstructure. However, engineers are generally reluctant to construct an unanchored structure because the system could overturn due to lacking redundancy. Using a safety factor for the design of a flat rocking foundation, ie, designing it wider, goes against the main idea of this seismic modification method as the force demand for the structure increases. We propose to extend the flat base of a rocking block with curved extensions to better protect the block from overturning, yet not prevent its uplifting. After investigating the seismic response of such rocking blocks, we extend the study to investigate the seismic response of rolling and rocking frames comprising columns with curved base extensions. The equations of motion are derived, time history analyses are performed, and rocking spectra are constructed. We draw two important conclusions: (a) the response of a class of rocking oscillators with curved base extensions is equivalent to the response of a flat-base rocking oscillators of the same slenderness, yet larger size; (b) the rotation demand on two negative stiffness rocking and rolling oscillators with the same uplifting acceleration and the same size is roughly the same as long as the rocking oscillators are not close to overturning. The above findings can serve as a basis for the rational seismic design of structures supported on rocking columns with curved bases, a system that has been used since the 1960s.