Greenhouse Gas Emissions from Hydroelectric Reservoirs in Tropical Regions

This paper discusses emissions by power-dams in the tropics. Greenhouse gas emissions from tropical power-dams are produced underwater through biomass decomposition by bacteria. The gases produced in these dams are mainly nitrogen, carbon dioxide and methane. A methodology was established for measuring greenhouse gases emitted by various power-dams in Brazil. Experimental measurements of gas emissions by dams were made to determine accurately their emissions of methane (CH₄) and carbon dioxide (CO₂) gases through bubbles formed on the lake bottom by decomposing organic matter, as well as rising up the lake gradient by molecular diffusion.The main source of gas in power-dams reservoirs is the bacterial decomposition (aerobic and anaerobic) of autochthonous and allochthonous organic matter that basically produces CO₂ and CH₄. The types and modes of gas production and release in the tropics are reviewed.     

利用遥感技术建立墨西哥热带地上生物量模型(英文)

Spatially-explicit estimation of aboveground biomass(AGB) plays an important role to generate action policies focused in climate change mitigation,since carbon(C) retained in the biomass is vital for regulating Earth’s temperature.This work estimates AGB using both chlorophyll(red,near infrared) and moisture(middle infrared) based normalized vegetation indices constructed with MCD43A4 MODerate-resolution Imaging Spectroradiometer(MODIS) and MOD44B vegetation continuous fields(VCF) data.The study area is located in San Luis Potosí,Mexico,a region that comprises a part of the upper limit of the intertropical zone.AGB estimations were made using both individual tree data from the National Forest Inventory of Mexico and allometric equations reported in scientific literature.Linear and nonlinear(expo-nential) models were fitted to find their predictive potential when using satellite spectral data as explanatory variables.Highly-significant correlations(p = 0.01) were found between all the explaining variables tested.NDVI62,linked to chlorophyll content and moisture stress,showed the highest correlation.The best model(nonlinear) showed an index of fit(Pseudo-r2) equal to 0.77 and a root mean square error equal to 26.00 Mg/ha using NDVI62 and VCF as explanatory variables.Validation correlation coefficients were similar for both models:lin-ear(r = 0.87**) and nonlinear(r = 0.86**).     

Geological evolution of the West Luzon Basin (South China Sea,Philippines)

Interpretation of deep 2-D multi-channel seismic data sheds insights into the geological evolution of the West Luzon Basin, Philippines. This basin is a sediment-filled trough that is located between the island of Luzon and the outer arc high of the west Luzon subduction zone. High-amplitude, low-frequency reflection bands mark the acoustic basement. The basement, at about 6 s (TWT), is dissected by normal faults with some of them being inverted in a later phase of deformation. The sedimentary successions, overlying the basement are stratified with partly chaotic structures and discontinuous reflectors. Five regional unconformities separate major stratigraphic units. Grid calculations of our seismic data reveal variations in the sedimentation pattern of the basin with a shift of the deposition centre from east to west and backwards during formation. A distinct bottom-simulating reflector is commonly observed. Because the northern boundary of the continental fragments to the South of the West Luzon Basin is unclear we speculate that the basin may be (partly) underlain by continental crust. The continental crust was affected by rifting prior to and during the opening of the South China Sea and the basin was overprinted at a later stage by a forearc structural setting when subduction was initiated.     

Shear partitioning in the Philippines: Constraints from Philippine Fault and global positioning system data

Abstract The Philippine Fault is a major left-lateral structure formed in an island arc setting. It accommodates a component of the oblique convergence between the Philippine Sea Plate and the Philippine archipelago. This observation is quantified through a series of global positioning satellite experiments between 1991 and 1996. The formation of the Fault marks the onset of a new geodynamic regime in the Philippine region. In the central Philippines, this event corresponds to the creation of a new tectonic boundary separating the Philippine Mobile Belt and the Philippine Sea Plate, following the latter's kinematic reorganization that occurred around 4 Ma ago. During this event, the Philippine Sea Plate changed its relative movement with respect to Eurasia from a northward to a north-westward motion, favoring the formation of a Philippine Fault–Philippine Trench system under a shear partitioning mechanism.     

Analytical and numerical analyses of the load‐bearing capacity of retaining walls laterally supported at both ends

This paper investigates the load‐bearing capacity of a perfectly smooth retaining wall laterally supported at both ends assuming that the wall fails by the development of three plastic hinges. The study considers the case of a cohesionless elastic–perfectly plastic backfill with a Mohr–Coulomb yield criterion and an associative flow rule in drained conditions. A kinematically admissible soil–structure failure mechanism is proposed and compared with the conventional solutions and with results from a numerical finite element modelling. The study shows that the proposed solution and the numerical solution are in good agreement. These solutions are found to be much more favourable for the wall than the conventional solutions. Copyright © 2010 John Wiley & Sons, Ltd.     

X-ray determination and equilibrium composition of clinopyroxenes in the system CaO-MgO-Al2O3-SiO2

Ternary clinopyroxenes have been synthesized in the plane Di-CaTs-En. The variation of their crystallographic parameters has allowed the development of three determinative grids, which utilize b-, 2 _22¯1–2 ₃₁₀ and 2 ₃₃₀ –2 ₂₀₂ respectively. These grids show significant differences in comparison with the previously proposed ones. Present results have been used to review some data on clinopyroxenes equilibria in the system CaO-MgO-Al₂O₃-SiO₂ (CMAS) (Biggar 1969; Bruno and Facchinelli 1978; Herzberg 1978; O'Hara and Schairer 1963; Boyd 1969). In particular the petrogenic grid correlating P, T and CaTs content of clinopyroxenes in spinel-lherzolite assemblage (Herzberg 1978) has been revised, and consequently equilibrium temperatures rise by one hundred degrees.     

MINERALOGY,PETROLOGY AND CHEMISTRY OF THE ISNA (C3) METEORITE

A total chemical analysis of the Isna, Egypt, meteorite is similar to analyses for chondrites of type C3, Ornans sub-type; however, comparison with one group of chemical data indicates that Isna is intermediate between the C3(O)'s and C3(V)'s in terms of total Fe. On the basis of atom ratios of Fe, Ca, Al, and Ti to Si, Isna can also be placed into a chemical group which includes types C1 and C2, as well as C3(O). Thin sections show a variety of small, closely-packed chondrules, fragments, and aggregate-like masses in a poorly translucent matrix. Olivine + clinoenstatite inclusions rich in metal and troilite, and olivine-rich inclusions are abundant and show evidence of shock. Ca-Al-Ti-rich inclusions, of probable high-temperature origin, contain olivine, spinel, Ca-rich nepheline, gehlenite, diopside, augite, enstatite, and anorthite. Kamacite and taenite from various occurrences in the meteorite have rather uniform Ni and Co contents, and Ni/Co for kamacite is close to that for several C3(O)'s.     

Subsurface thermal conductivity assessment in Calabria (southern Italy): a regional case study

Determining the suitability of a local area at a regional or local scale for the geothermal application of low enthalpy systems requires the knowledge of rock thermal conductivity values to evaluate the possibility of low-enthalpy heat exchange. A digital cartographic tool is also needed to synthesize the thermal properties of the underground. This tool should be easily accessible and upgradeable and thus suitable for territorial planning and environmental control. In order to address these key issues, a methodological approach was developed within the framework of the national VIGOR Project, dedicated to evaluating the geothermal potential in southern Italy. In this paper the region of Calabria was selected as a case study. Around 70 samples that were representative of the main geological formations were collected from all over the area. Thermal property tests were carried out both in dry and wet conditions, using a thermal device in accordance with the modified transient plane source method. The thermal conductivity values were then compared with data from the international literature. In order to consider the influence of the entire stratigraphic sequence on the thermal conductivity parameters, a geostatistical analysis of the available lithostratigraphic data was performed using the MATLAB toolbox Modalstrata, specially developed for this purpose. A comprehensive geothermal subsurface characterization of Calabria was thus obtained.     

Comparison of nonlinear static methods for the assessment of asymmetric buildings

Traditional nonlinear static methods, e.g. the original version of the N2 method implemented in Eurocode 8, are not always effective in the assessment of asymmetric structures because of the errors committed in the evaluation of the torsional response. To overcome this shortcoming, two methods have recently been suggested by Kreslin and Fajfar (Bull Earthquake Eng 10(2):695–715, 2012) and Bosco et al. (Earthq Eng Struct Dyn 41:1751–1773, 2012). In particular, the method proposed by Kreslin and Fajfar adjusts the results of the nonlinear static analysis by means of those of a standard modal response spectrum analysis. In the method proposed by Bosco et al., the researchers suggested the use of two nonlinear static analyses characterized by lateral forces applied to different points of the deck. In this paper, the two improved nonlinear static methods and the original N2 method are applied to predict the maximum dynamic response of single- and multi-storey systems subjected to artificial and recorded accelerograms. The results highlight that the improved nonlinear static methods provide estimates which are more accurate than those of the original N2 method. Further, the comparison of the results identifies the range of the structural properties within which the original N2 method is still reliable and the range within which one of the two improved methods should be preferred.     

Corrective eccentricities for assessment by the nonlinear static method of 3D structures subjected to bidirectional ground motions

Nonlinear static methods are reliable in the evaluation of the seismic response of planar structural schemes, but they are not very effective in the assessment of three-dimensional building structures. The authors of this paper have recently proposed a nonlinear static approach for asymmetric structures, which is an improvement on that stipulated by seismic codes. This method is based on the observation that the distribution of the maximum dynamic displacements of the deck can be enveloped by two pushover analyses performed by applying the lateral force with two eccentricities with respect to the center of mass of the deck. These eccentricities, named “corrective eccentricities”, are defined so that the two corresponding pushover analyses provide displacements that are equal to those evaluated by nonlinear dynamic analysis at the two sides of the deck. In this paper, the corrective eccentricities are determined for a wide set of single-story systems. The equations for their analytical evaluation are determined and their reliability is demonstrated. Finally, the analysis of a multi-story structure is conducted to show how the method can be applied to real buildings. Copyright © 2012 John Wiley & Sons, Ltd.