Pleistocene mass-flow deposits of basaltic hyaloclastite on a shallow submarine shelf,South Iceland

A Pleistocene subaqueous, volcanic sequence in South Iceland consists of flows of basaltic hyaloclastite and lava with interbedded sedimentary diamictite units. Emplacement occurred on a distal submarine shelf in drowned valleys along the southern coast of Iceland. The higher sea level was caused by eustatic sea-level change, probably towards the end of a glaciation. This sequence, nearly 700 m thick, rests unconformably on eroded flatlying lavas and sedimentary rocks of likely Tertiary age. A Standard Depositional Unit, describing the flows of hyaloclastite, starts with compact columnar-jointed basalt overlain by cubejointed basalt, and/or pillow lava. This in turn is overlain by thick unstructured hyaloclastite containing aligned basalt lobes, and bedded hyaloclastite at the top. A similar lithofacies succession is valid for proximal to distal locations. The flows were produced by repeated voluminous extrusions of basaltic lava from subaquatic fissures on the Eastern Rift Zone of Iceland. The fissures are assumed to lie in the same general area as the 1783 Laki fissure which produced 12 km³ of basaltic lava. Due to very high extrusion rates, the effective water/melt ratio was low, preventing optimal fragmentation of the melt. The result was a heterogeneous mass of hyaloclastite and fluid melt which moved en masse downslope with the melt at the bottom of the flow and increasingly vesicular hyaloclastite fragments above. The upper and distal parts of the flow moved as low-concentration turbulent suspensions that deposited bedded hyaloclastite.     

Observations of a fast burst of the deep western boundary undercurrent and sediment transport in South Wilmington Canyon from DSRVAlvin

On October 3 and 4, 1986, DSRVAlvin dives encountered a strong current at 2,300 m in South Wilmington Canyon. The current, estimated at 1 knot, transported surficial sediment and constructed and modified bedforms. It appears to have been constant in its direction of flow from 30 to 40°. The observed current was probably a burst of fast flow in a region of slow average currents in the Deep Western Boundary Undercurrent. Such episodic events may have a greater influence on the stratigraphic record than the temporally longer more tranquil flow conditions.     

Theory of the local scale parameter method for EDM

The determination of a representative refractive index for the wave path is the main limitation of the attainable accuracy in electronic distance measurement. To overcome this limitation the length ratio method was initially proposed and later developed into the local scale parameter (LSP) method. In this paper, the mathematical model of the LSP method is derived for electro-optical distance measurement from first principles based on the physics of the atmospheric boundary layer. The model does not rely on standard atmospheres. It is shown that atmospheric temperatures and pressures must be observed at instrument stations but not at reflector stations. Appropriate LSP field procedures and the results of some field experiments are summarized. The method consistently produces accuracies of better than ±1 ppm. Use of the method is recommended for high precision (trilateration) networks, which need to be measured repeatedly and where absolute scale is not relevant.     

The polarization of X-ray emission of some solar flares in July 1974

Preliminary results of polarization measurements at three solar flares of July 5 and 6, 1974, are given. The measurements were performed at h 15 keV with Thomson-scattering polarimeter on the Intercosmos 11 satellite.At the decay phase of the flare on July 5 we obtained P = 3.4–5.0%, which did not exclude some contribution from non-thermal processes. At the flares of July 6 we found P =1.0–1.9% and P = 0.1–2.0%, respectively: neither value exceeds the level of statistical fluctuations.Presented at XVIII COSPAR Meeting (VARNA, May–June 1975), contribution III.B.2.9.     

Common-Reflection-Surface Stack for Converted Waves

The finite-offset (FO) common-reflection-surface (CRS) stack has been shown to be able to handle not only P-P or S-S but also arbitrarily converted reflections. It can provide different stack sections such as common-offset (CO), common-midpoint (CMP) and common-shot (CS) sections with significantly increased signal-to-noise ratio from the multi-coverage pre-stack seismic data in a data-driven way. It is our purpose in this paper to demonstrate the performance of the FO CRS stack on data involving converted waves in inhomogeneous layered media. In order to do this we apply the FO CRS stack for common-offset to a synthetic seismic data set involving P-P as well as P-S converted primary reflections. We show that the FO CRS stack yields convincing improvement of the image quality in the presence of noisy data and successfully extracts kinematic wavefield attributes useful for further analyses. The extracted emergence angle information is used to achieve a complete separation of the wavefield into its P-P and P-S wave components, given the FO CRS stacked horizontal and vertical component sections.     

Sulfur isotope fractionation during growth of sulfate-reducing bacteria on various carbon sources

Stable sulfur isotope fractionation during microbial sulfate reduction is a potential tool to estimate sulfate reduction rates at field sites. However, little is known about the influence of the utilized carbon source on the magnitude of sulfur isotope fractionation. To investigate this effect, both a pure culture (strain PRTOL1) and enrichment cultures from a petroleum hydrocarbon (PHC)-contaminated aquifer were used and grown in batch cultures on various carbon sources with an initial sulfate concentration of 1 mmol/L. As sole carbon sources the PHC components naphthalene, 1,3,5-trimethylbenzene, and heating oil (enrichment culture) and the organic acids acetate, pyruvate, benzoate, and 3-phenylpropionate (enrichment culture and PRTOL1) were used. Sulfate reduction rates of all cultures ranged from 6 ± 1 nmol cm⁻³ d⁻¹ (enrichment culture grown on 1,3,5-trimethylbenzene) to 280 ± 6 nmol cm⁻³ d⁻¹ (enrichment culture grown on pyruvate). Cell-specific sulfate reduction rates ranged from 1.1 × 10⁻¹⁴ mol cell⁻¹ d⁻¹ (PRTOL1 grown on pyruvate) to 1.5 × 10⁻¹³ mol cell⁻¹ d⁻¹ (PRTOL1 grown on acetate). Sulfur isotope enrichment factors (ε) for the enrichment culture ranged from 16.1‰ (3-phenylpropionate) to 34.5‰ (1,3,5-trimethylbenzene) and for PRTOL1 from 30.0‰ (benzoate) to 36.0‰ (pyruvate). Cultures of PRTOL1 always showed higher ε values than the enrichment culture when grown on the same carbon source due to culture-specific properties. Higher ε values were obtained when the enrichment culture was grown on PHC components than on organic acids. No relationship between ε values and cell-specific sulfate reduction rate existed when all data were combined. When comparing the magnitude of ε values determined in this laboratory study with ε values measured at contaminated and uncontaminated field sites, it becomes evident that a multitude of factors influences ε values at field sites and complicates their interpretation. The results of this study help us assess some of the general parameters that govern the magnitude of ε in sulfate-reducing environments.     

A model for oxygen and sulfur isotope fractionation in sulfate during bacterial sulfate reduction processes

We present a model of bacterial sulfate reduction that includes equations describing the fractionation relationship between the sulfur and the oxygen isotope composition of residual sulfate (δ³⁴S_{SO4_residual}, δ¹⁸O_{SO4_residual}) and the amount of residual sulfate. The model is based exclusively on oxygen isotope exchange between cell-internal sulfur compounds and ambient water as the dominating mechanism controlling oxygen isotope fractionation processes. We show that our model explains δ³⁴S_{SO4_residual} vs. δ¹⁸O_{SO4_residual} patterns observed from natural environments and from laboratory experiments, whereas other models, favoring kinetic isotope fractionation processes as dominant process, fail to explain many (but not all) observed δ³⁴S_{SO4_residual} vs. δ¹⁸O_{SO4_residual} patterns. Moreover, we show that a “typical” δ³⁴S_{SO4_residual} vs. δ¹⁸O_{SO4_residual} slope does not exist. We postulate that measurements of δ³⁴S_{SO4_residual} and δ¹⁸O_{SO4_residual} can be used as a tool to determine cell-specific sulfate reduction rates, oxygen isotope exchange rates, and equilibrium oxygen isotope exchange factors. Data from culture experiments are used to determine the range of sulfur isotope fractionation factors in which a simplified set of equations can be used. Numerical examples demonstrate the application of the equations. We postulate that, during denitrification, the oxygen isotope effects in residual nitrate are also the result of oxygen isotope exchange with ambient water. Consequently, the equations for the relationship between δ³⁴S_{SO4_residual}, δ¹⁸O_{SO4_residual}, and the amount of residual sulfate could be modified and used to calculate the fractionation-relationship between δ¹⁵N_{NO3_residual}, δ¹⁸O_{NO3_residual}, and the amount of residual nitrate during denitrification.     

Clam community composition and prey shell size impacts moon snail (Gastropod: Naticidae) drilling frequencies in South Carolina,USA

Moon snail predation on clams is a common model system of predator–prey interactions. In this system, the predator bores through the shell of its prey, leaving a distinct and identifiable hole. Some paleoecological and behavioral research on moon snails suggests a trend in predation preference directed toward clams with small shells. Rarely, however, have studies tested relative drilling frequencies across species and size ranges in natural assemblages of clam communities. We examined the clam community composition at two beaches in South Carolina, USA, and we then tested moon snail predator preferences for (a) clam prey species and (b) whether their selection is related to prey shell size. We collected a total of 1,879 clam shells, identified each shell to species and recorded their anteroposterior length. The species composition of clams differed significantly between the two beaches; Anadara ovalis was dominant at both sites, but three of ten total species were only collected at one beach. Folly Beach had nearly a 60% higher the overall drilling frequency (34.6%) versus Edisto Beach (21.8%), and this may be linked to the differences in clam community compositions at the sites. For A. ovalis and Mulinia lateralis, shells with larger lengths have lower probabilities of being bored by a moon snail. Anadara brasiliana, which generally is a thinner‐shelled clam species, had the highest total drilling frequency (77.2%), and Noetia ponderosa, a thicker‐shelled clam, had a considerably lower drilling frequency (12.0%). We conclude that both community level factors (species composition) and population characteristics (shell size distributions) may influence the local drilling frequency by moon snails.     

Assessing quality of volunteer crowdsourcing contributions: lessons from the Cropland Capture game

Volunteered geographic information (VGI) is the assembly of spatial information based on public input. While VGI has proliferated in recent years, assessing the quality of volunteer-contributed data has proven challenging, leading some to question the efficiency of such programs. In this paper, we compare several quality metrics for individual volunteers’ contributions. The data were the product of the ‘Cropland Capture’ game, in which several thousand volunteers assessed 165,000 images for the presence of cropland over the course of 6 months. We compared agreement between volunteer ratings and an image's majority classification with volunteer self-agreement on repeated images and expert evaluations. We also examined the impact of experience and learning on performance. Volunteer self-agreement was nearly always higher than agreement with majority classifications, and much greater than agreement with expert validations although these metrics were all positively correlated. Volunteer quality showed a broad trend toward improvement with experience, but the highest accuracies were achieved by a handful of moderately active contributors, not the most active volunteers. Our results emphasize the importance of a universal set of expert-validated tasks as a gold standard for evaluating VGI quality.