Deep-water sediment transport patterns and basin floor topography in early rift basins: Plio-Pleistocene syn-rift of the Corinth Rift,Greece

Our current understanding on sedimentary deep-water environments is mainly built of information obtained from tectonic settings such as passive margins and foreland basins. More observations from extensional settings are particularly needed in order to better constrain the role of active tectonics in controlling sediment pathways, depositional style and stratigraphic stacking patterns. This study focuses on the evolution of a Plio-Pleistocene deep-water sedimentary system (Rethi-Dendro Formation) and its relation to structural activity in the Amphithea fault block in the Corinth Rift, Greece. The Corinth Rift is an active extensional basin in the early stages of rift evolution, providing perfect opportunities for the study of early deep-water syn-rift deposits that are usually eroded from the rift shoulders due to erosion in mature basins like the Red Sea, North Sea and the Atlantic rifted margin. The depocentre is located at the exit of a structurally controlled sediment fairway, approximately 15 km from its main sediment source and 12 km basinwards from the basin margin coastline. Fieldwork, augmented by digital outcrop techniques (LiDAR and photogrammetry) and clast-count compositional analysis allowed identification of 16 stratigraphic units that are grouped into six types of depositional elements: A—mudstone-dominated sheets, B—conglomerate-dominated lobes, C—conglomerate channel belts and sandstone sheets, D—sandstone channel belts, E—sandstone-dominated broad shallow lobes, F—sandstone-dominated sheets with broad shallow channels. The formation represents an axial system sourced by a hinterland-fed Mavro delta, with minor contributions from a transverse system of conglomerate-dominated lobes sourced from intrabasinal highs. The results of clast compositional analysis enable precise attribution for the different sediment sources to the deep-water system and their link to other stratigraphic units in the area. Structures in the Amphithea fault block played a major role in controlling the location and orientation of sedimentary systems by modifying basin-floor gradients due to a combination of hangingwall tilt, displacement of faults internal to the depocentre and folding on top of blind growing faults. Fault activity also promoted large-scale subaqueous landslides and eventual uplift of the whole fault block.     

A Unified Model for Black Hole X-Ray Binary Jets?

We have recently put forward a ‘unified’ semi-empirical model for the coupling between accretion and jet production in galactic black hole X-ray binaries. In this paper, we summarise this model and briefly discuss relevant considerations that have arisen since its publication.     

Circularly polarised radio emission from GRS 1915+105 and other X-ray binaries

I report the detection of circular polarisation, associated with relativistic ejections, from the `microquasar' GRS 1915+105. I further compare detections and limits of circular polarisation and circular-to-linear polarisation ratios in other X-ray binaries. Since in at least two cases the dominance of linear over circular polarisation or vice versa is a function of frequency, this seems to indicate that this is a strong function of depolarisation in the source. Furthermore, I note that circular polarisation has only been detected from sources whose jets lie close to the plane of the sky, where as we have quite stringent limits on the circular polarisation of jets which lie close to the line of sight.     

Stable nonlinear methods for sensor array processing;

Most nonlinear high-resolution bearing estimators are unstable in the presence of correlated noise, system phase errors, and multipath arrivals because they inadvertently place too much emphasis on unstable eigenvectors of the cross-sensor correlation matrix. For moderately correlated noise there will be sufficiently many stable eigenvectors to resolve and localize discrete sources. A method is given (the "stable nonlinear method" or SNLM) whereby reweighting of the eigenvectors is achieved implicitly, without actual calculation of the eigenvectors. This SNLM is compared with Capon's maximum likelihood method (MLM) in simulations of correlated noise, partially correlated signals, and phase errors, and is shown to provide good stability in the cases considered.     

Implementing low-cost landslide risk reduction: a pilot study in unplanned housing areas of the Caribbean

Landslides pose a serious physical and environmental threat to vulnerable communities living in areas of unplanned housing on steep slopes in the Caribbean. Some of these communities have, in the past, had to be relocated, at costs of millions of dollars, because of major slides triggered by tropical storm rainfall. Even so, evidence shows that: (1) risk reduction is a marginal activity; (2) there has been minimal uptake of hazard maps and vulnerability assessments and (3) there is little on-the-ground delivery of construction for risk reduction. This article directly addresses these issues by developing a low-cost approach to the identification of the potential pore pressure changes that trigger such slides we seek to address these three commentaries directly. A complex 45–60° slope site in St Lucia, West Indies was selected as a pilot for a modelling approach that uses numerical models (FLAC and CHASM) to verify the need for surface water management to effectively reduce landslide risk. Following the model confirmation, a series of drains were designed and constructed at the site. Post-construction evidence indicates the methodology to be sound, in that the site was stable in subsequent 1-in-1 to 1-in-4 year rainfall events. A critical feature of the approach is that it is community-based from data acquisition through to community members participating in construction.     

Solubility of hydrous ferric oxide and iron speciation in seawater

Iron solubility equilibria were investigated in seawater at 36.22‰ salinity and 25°C using several filtration and dialysis techniques. In simple filtration experiments with 0.05 μm filters and Millipore ultra-filters, ferric chlorides fluorides, sulfates, and FeOH²⁺ species were found to be insignificant relative to Fe(OH)₂⁺ at p[H⁺] = ?log [H⁺] greater than 6.0. Hydrous ferric oxide freshly precipitated from seawater yielded a solubility product of ${}^1\text{K}{}_{\mathrm{<mtext>so</mtext>}}\text{=}\text{[Fe}{}^{\mathrm{3+}}\text{][H}{}^{\mathrm{+}}\text{]}{}^{\mathrm{?3}}\text{= 4.7 · 10}{}^5$. Solubility studies based on the rates of dialysis of various seawater solutions and on the filtration of acidified seawater solutions indicated the existence of the Fe(OH)₃⁰ species. The formation constant for this species can be calculated as ${}^1\text{β}{}_3\text{=}\text{[Fe(OH)}{}_3{}^0\text{] [H}{}^{\mathrm{+}}\text{]}{}^3\text{/[Fe}{}^{\mathrm{3+}}\text{] = 2.4 · 10}{}^{\mathrm{?14}}$. The Fe(OH)₄^? species is present at concentrations which are negligible compared to Fe(OH)₂⁺ and Fe(OH)₃⁰ in the normal pH range of seawater. However, there is at least one other significant ferric complex in seawater above p[H⁺] = 8.0 (possibly with bicarbonate, carbonate, or borate ions) in addition to the Fe(OH)₂⁺ and Fe(OH)₃⁰ species.     

A permanent seismic station beneath the Ocean Bottom

The Hawaii Institute of Geophysics began development of the Ocean Subbottom Seisometer (OSS) system in 1978, and OSS systems were installed in four locations between 1979 and 1982. The OSS system is a permanent, deep ocean borehole seismic recording system composed of a borehole sensor package (tool), an electromechanical cable, recorder package, and recovery system. Installed near the bottom of a borehole (drilled by the D/V Glomar Challenger), the tool contains three orthogonal, 4.5-Hz geophones, two orthogonal tilt meters; and a temperature sensor. Signals from these sensors are multiplexed, digitized (with a floating point technique), and telemetered through approximately 10 km of electromechanical cable to a recorder package located near the ocean bottom. Electrical power for the tool is supplied from the recorder package. The digital seismic signals are demultiplexed, converted back to analog form, processed through an automatic gain control (AGC) circuit, and recorded along with a time code on magnetic tape cassettes in the recorder package. Data may be recorded continuously for up to two months in the self-contained recorder package. Data may also be recorded in real time (digital formal) during the installation and subsequent recorder package servicing. The recorder package is connected to a submerged recovery buoy by a length of bouyant polypropylene rope. The anchor on the recovery buoy is released by activating either of the acoustical command releases. The polypropylene rope may also be seized with a grappling hook to effect recovery. The recorder package may be repeatedly serviced as long as the tool remains functionalA wide range of data has been recovered from the OSS system. Recovered analog records include signals from natural seismic sources such as earthquakes (teleseismic and local), man-made seismic sources such as refraction seismic shooting (explosives and air cannons), and nuclear tests. Lengthy continuous recording has permitted analysis of wideband noise levels, and the slowly varying parameters, temperature and tilt.Hawaii Institute of Geophysics Contribution 1909.     

A simple shaker table for seismometer calibration

A unique and simple shaker table (shake table or shaking table), designed, constructed, and installed at the Hawaii Institute of Geophysics, has proven to be a valuable aid in testing and calibrating short period seismometers, as well as ocean bottom and ocean sub-bottom seismometer/tilt meter packages. It consists of a platform suspended in a stairwell by a single elastic cord (10 m extended length) driven by GeoSpace HS-10 geophones. Platform motion is monitored by orthogonal reference geophones and tilt meters. The relatively low natural periods of the platform, about 1.9 sec vertical and 6.5 sec horizontal, provide sufficient isolation from local vibrations that calibration can be made near operational amplitudes. Vertical or horizontal driver geophones can be driven by a commercial signal generator or white noise generator, or from magnetic tape output. The table can also be tilted with respect to the drivers to determine tilt tolerances and to calibrate tilt meters. A Hewlett-Packard 3582-A spectrum analyzer, used to analyze both reference and output signals, provides near real-time system cabibration and is an efficient means for investigating parasitic system resonances. The analyzer can also provide a white noise signal source to the driver geophones.Hawaii Institute of Geophysics Contribution 1443.     

Distribution of trace and major elements in sediment and pore waters of the Lena Delta and Laptev Sea

Sediment cores collected during the SPASIBA expedition in 1991 were analysed for their trace- and major element concentrations. Leachable (0.1 N HCl) as well as residual concentrations were determined. Fe and Mn were measured in the interstitial waters to characterize redox conditions. Lateral distribution patterns of solid phase Cu, Cd, Ni, Pb and Zn show a small increase in concentration from the Lena Delta in seaward direction. In general concentrations of these metals are very low and similar to natural background values. With some exceptions, solid phase profiles with depth of all investigated elements do not show strong variations. No enrichment of Pb and Zn in surface layers was found. Remobilization processes and transport of particles enriched in Mn are responsible for Mn accumulation in a particular area. Pore-water concentrations of dissolved Mn in the latter sediments are very high (> 700 μM) and suggest strong Mn reduction directly below the sediment-water interface. In contrast to Mn, the depth profiles of Cd show a surface layer with lower concentrations and an increase deeper down the sediment. The C/N ratio in the sediment decreases from 13 in the Lena mouth to 9 in the more marine part of the Laptev Sea. Surface sediments in the Laptev Sea are very uniform and homogeneous and show only small concentration gradients.