Marginal formation of De Geer moraines and their implications to the dynamics of grounding‐line recession

De Geer moraine ridges occur in abundance in the coastal zone of northern Sweden, preferentially in areas with proglacial water depths in excess of 150 m at deglaciation. From detailed sedimentological and structural investigations in machine‐dug trenches across De Geer ridges it is concluded that the moraines formed due to subglacial sediment advection to the ice margin during temporary halts in grounding‐line retreat, forming gradually thickening sediment wedges. The proximal part of the moraines were built up in submarginal position as stacked sequences of deforming bed diamictons, intercalated with glaciofluvial canal‐infill sediments, whereas the distal parts were built up from the grounding line by prograding sediment gravity‐flow deposits, distally interfingering with glaciolacustrine sediments. The rapid grounding‐line retreat (ca. 400 m yr^?1) was driven by rapid calving, in turn enhanced by fast iceflow and marginal thinning of ice due to deforming bed conditions. The spatial distribution of the moraine ridges indicates stepwise retreat of the grounding line. It is suggested that this is due to slab and flake calving of the ice cliff above the waterline, forming a gradually widening subaqueous ice ledge which eventually breaks off to a new grounding line, followed by regained sediment delivery and ridge build‐up. Copyright © 2005 John Wiley & Sons, Ltd.     

Towards a consistent geochemical model for prediction of uranium(VI) removal from groundwater by ferrihydrite

Uranium(VI), which is often elevated in granitoidic groundwaters, is known to adsorb strongly to Fe (hydr)oxides under certain conditions. This process can be used in water treatment to remove U(VI). To develop a consistent geochemical model for U(VI) adsorption to ferrihydrite, batch experiments were performed and previous data sets reviewed to optimize a set of surface complexation constants using the 3-plane CD-MUSIC model. To consider the effect of dissolved organic matter (DOM) on U(VI) speciation, new parameters for the Stockholm Humic Model (SHM) were optimized using previously published data. The model, which was constrained from available X-ray absorption fine structure (EXAFS) spectroscopy evidence, fitted the data well when the surface sites were divided into low- and high-affinity binding sites. Application of the model concept to other published data sets revealed differences in the reactivity of different ferrihydrites towards U(VI). Use of the optimized SHM parameters for U(VI)-DOM complexation showed that this process is important for U(VI) speciation at low pH. However in neutral to alkaline waters with substantial carbonate present, Ca–U–CO₃ complexes predominate. The calibrated geochemical model was used to simulate U(VI) adsorption to ferrihydrite for a hypothetical groundwater in the presence of several competitive ions. The results showed that U(VI) adsorption was strong between pH 5 and 8. Also near the calcite saturation limit, where U(VI) adsorption was weakest according to the model, the adsorption percentage was predicted to be >80%. Hence U(VI) adsorption to ferrihydrite-containing sorbents may be used as a method to bring down U(VI) concentrations to acceptable levels in groundwater.     

Geochemistry and mineralogy of shallow alluvial aquifers in Daudkandi upazila in the Meghna flood plain, Bangladesh

The shallow alluvial aquifers of the delta plains and flood plains of Bangladesh, comprises about 70% of total land area are mostly affected by elevated concentrations of arsenic (As) in groundwater exposing a population of more than 35 million to As toxicity. Geochemical studies of shallow alluvial aquifer in the Meghna flood plain show that the uppermost yellowish grey sediment is low in As (1.03 mg/kg) compared to the lower dark grey to black sediment (5.24 mg/kg) rich in mica and organic matter. Sequential extraction data show that solid phase As bound to poorly crystalline and amorphous metal (Fe, Mn, Al)-oxyhydroxides is dominant in the grey to dark grey sediment and reaches its maximum level (3.05 mg/kg) in the mica rich layers. Amount of As bound to sulphides and organic matter also peaks in the dark grey to black sediment. Vertical distributions of major elements determined by X-ray fluorescence (XRF) show that iron (Fe₂O₃), aluminum (Al₂O₃) and manganese (MnO) follow the general trend of distribution of As in the sediments. Concentrations of As, Mn, Fe, HCO₃ ⁻, SO₄ ²⁻ and NO₃ ⁻ in groundwater reflect the redox status of the aquifer and are consistent with solid phase geochemistry. Mineralogical analysis by X-ray diffraction (XRD) and scanning electron microscopy (SEM) fitted with energy dispersive X-ray spectrometer (EDS) revealed dominance of crystalline iron oxides and hydroxides like magnetite, hematite and goethite in the oxidised yellowish grey sediment. Amorphous Fe-oxyhydroxides identified as grain coating in the mica and organic matter rich sediment suggests weathering of biotite is playing a critical role as the source of Fe(III)-oxyhydroxides which in turn act as sink for As. Presence of authigenic pyrite in the dark grey sediment indicates active reduction in the aquifer.     

Tides, sea-level rise and tidal power extraction on the European shelf

An established numerical tidal model has been used to investigate the impact of various sea-level rise (SLR) scenarios, as well as SLR in combination with large-scale tidal power plants on European shelf tidal dynamics. Even moderate and realistic levels of future SLR are shown to have significant impacts on the tidal dynamics of the area. These changes are further enhanced when SLR and tidal power plants are considered in combination, resulting in changes to tidal amplitudes, currents and associated tidal dissipation and bed shear stresses. Sea-level rise is the dominant influence on any far-field impacts, whereas tidal power plants are shown to have the prevailing influence over any changes close to the point of energy extraction. The spatial extent of the impacts of energy extraction is shown to be affected by the sea level when more than one tidal power plant in the Irish Sea was considered. Different ways to implement SLR in the model are also discussed and shown to be of great significance for the response of the tides.     

Climatic control on the growth of gigantic gypsum crystals within hypogenic caves (Naica mine,Mexico)?

Three hypogenic caves within the Naica mine of Mexico (Cueva de los Cristales — CLC, Ojo de la Reina — OR, and Cueva de las Velas — CLV) host spectacular gypsum crystals up to 11 m in length. These caves are close to another shallow cave of the area (Cueva de las Espadas — CLE), with which they cover a 160 m-deep vertical section of the local drainage basin. Similar to other hypogenic caves, all these caves lack a direct connection with the land surface and should be unrelated with climate.A record of multi-technique fluid inclusion data and pollen spectra from cave and mine gypsum indicates surprisingly that climatic changes occurring at Naica could have controlled fluid composition in these caves, and hence crystal growth. Microthermometry and LA-ICP-Mass Spectrometry of fluid inclusions indicate that the shallow, chemically peculiar, saline fluid (up to 7.7 eq. wt.%NaCl) of CLE could have formed from evaporation, during a dry and hot climatic period. The fluid of the deep caves was instead of low salinity (～ 3.5 eq. wt.% NaCl) and chemically homogeneous, and was poorly affected by evaporation. We propose that mixing of these two fluids, generated at different depths of the Naica drainage basin, determined the stable supersaturation conditions for the gigantic gypsum crystals to grow. Fluid mixing was controlled by the hydraulic communication between CLE and the other deep caves, and must have taken place during cycles of warm-dry and fresh-wet climatic periods, which are known to have occurred in the region. Pollen grains from a 35 ka-old gypsum crystal of CLC corresponds to a fairly homogenous catchment basin made of a mixed broadleaf wet forest, which suggests precipitation during a fresh-wet climatic period and confirms our interpretation of the fluid inclusion data.The unusual combination of geological and geochemical factors of Naica suggests that other hypogenic caves found elsewhere may not host similar crystals. However, this work shows that fluid inclusions and pollen spectra represent a useful tool for cave studies in general, and if used in future studies might be essential to unravel the mechanisms of hypogenic deposition.     

The dual-beam mini-DOAS technique—measurements of volcanic gas emission,plume height and plume speed with a single instrument

The largest error in determining volcanic gas fluxes using ground based optical remote sensing instruments is typically the determination of the plume speed, and in the case of fixed scanning instruments also the plume height. We here present a newly developed technique capable of measuring plume height, plume speed and gas flux using one single instrument by simultaneously collecting scattered sunlight in two directions. The angle between the two measurement directions is fixed, removing the need for time consuming in-field calibrations. The plume height and gas flux is measured by traversing the plume and the plume speed is measured by performing a stationary measurement underneath the plume. The instrument was tested in a field campaign in May 2005 at Mt. Etna, Italy, where the measured results are compared to wind fields derived from a meso-scale meteorological model (MM5). The test and comparison show that the instrument is functioning and capable of estimating wind speed at the plume height.     

Tomographic reconstruction of gas plumes using scanning DOAS

This paper presents a method to reconstruct the gas distribution inside a vertical cross section of a gas plume by combining data from two or more scanning DOAS instruments using a tomographic algorithm. The method can be applied to gas plumes from any single, elevated point source, such as a volcano or industrial chimney. Such two-dimensional concentration distributions may prove to be useful for example in plume chemistry, dispersion and environmental impact studies. Here we show the case with one scanning DOAS instrument located on each side of the plume, which is the easiest and most economic setup as well as the most useful in routine monitoring of e.g. volcanic gas emissions. The paper investigates the conditions under which tomographic reconstructions can be performed and discusses limitations of this setup. The proposed method has been studied theoretically by numerical simulations and has been experimentally tested during two field campaigns, with measurements of SO₂ emissions from a volcano and a power plant. The simulations show that, under good measurement conditions, the algorithm presented performs well, which is further confirmed by the experimental results.     

Air-clad fibres for astronomical instrumentation: focal-ratio degradation

Focal-ratio degradation (FRD) of light launched into high-numerical aperture (NA) single-annulus all-silica undoped air-clad fibres at an NA of 0.54 is reported. The measured annular light distribution remained Gaussian after 30 m of propagation, but the angular FWHM of the output annulus doubled from 4° after 1 m propagation to 8.5° after 30 m, which is significantly larger than that reported of standard doped-silica fibres (NA < 0.22). No significant diffractive effects were observed. The design of air-clad fibres for broad-band, high-NA astrophotonics applications is discussed.     

Physics of the Omori law: Inferences from interevent time distributions and pore pressure diffusion modeling

Empirical laws and statistics of earthquakes are valuable as a basis for a better understanding of the earthquake cycle. In this paper we focus on the postseismic phase and the physics of aftershock sequences. Using interevent time distributions for a catalogue of Icelandic seismicity, we infer that the parameter C₂ in the Omori law, often considered to represent incomplete detection of aftershocks, is at least in part related to the physics of the earthquake process. We investigate the role of postseismic pore pressure diffusion after two Icelandic earthquakes on the rate of aftershocks and what we can infer about the physical meaning of C₂ from the diffusion process. Using the Mohr–Coulomb failure criterion we obtain a rate of triggered points in our diffusion model that agrees with the modified Omori law, with a value of C₂ that is consistent with data. Our pore pressure diffusion model suggests that C₂ is related to the process of reducing high pore pressure gradients existing across a fault zone at short times after a main shock.     

Arsenic in shallow groundwater of Bangladesh: investigations from three different physiographic settings

Occurrences of arsenic (As) in the Bengal Basin of Bangladesh show close relationships with depositional environments and sediment textures. Hydrochemical data from three sites with varying physiography and sedimentation history show marked variations in redox status and dissolved As concentrations. Arsenic concentration in groundwater of the Ganges Flood Plain (GFP) is characteristically low, where high Mn concentrations indicate redox buffering by reduction of Mn(IV)-oxyhydroxides. Low DOC, \( {\text{HCO}}^{ - }_{3} \), \( {\text{NH}}^{ + }_{4} \) and high \( {\text{NO}}^{ - }_{3} \) and \( {\text{SO}}^{{2 - }}_{4} \) concentrations reflect an elevated redox status in GFP aquifers. In contrast, As concentration in the Ganges Delta Plain (GDP) is very high along with high Fe and low Mn. In the Meghna Flood Plain (MFP), moderate to high As and Fe concentrations and low Mn are detected. Degradation of organic matter probably drives redox reactions in the aquifers, particularly in MFP and GDP, thereby mobilising dissolved As. Speciation calculations indicate supersaturation with respect to siderite and vivianite in the groundwater samples at MFP and GDP, but groundwater in the GFP wells is generally supersaturated with respect to rhodochrosite. Values of log P_CO2 at MFP and GDP sites are generally higher than at the GFP site. This is consistent with Mn(IV)-redox buffering suggested at the GFP site compared to Fe(III)-redox buffering at MFP and GDP sites.