Evaluation of Electro-Oxidation of Textile Effluent Using Response Surface Methods

In the present investigation, treatment of textile effluent using an electrochemical technique was designed and analyzed using the Box-Behnken method. The influence of individual parameters on electro-oxidation of textile effluent has been critically examined using the response surface method (RSM), and a quadratic model for chemical oxygen demand (COD) reduction has been developed. It has been observed from the present analysis that the predicted values are in good agreement with experimental data with a correlation coefficient of 0.945.     

Removal of Ni(II) Using Cation Exchange Resins in Packed Bed Column: Prediction of Breakthrough Curves

Sorptive removal of Ni(II) from electroplating rinse wastewaters by cation exchange resin Dueolite C 20 was investigated at the temperature of 30°C under dynamic conditions in a packed bed. The effects of sorbent bed length 0.1–0.2 m, fixed flow rate 6 dm³ min^?1, and the initial rinse water concentration (C₀) 53.1 mg L^?1 on the sorption characteristics of Dueolite C 20 were investigated at an influent pH of 6.5. More than 94.5% of Ni(II) was removed in the column experiments. The column performance was improved with increasing bed height and decreasing the flow rate. The Thomas, Yoon–Nelson, Clark, and Wolborska models were applied to the experimental data to represent the breakthrough curves and determine the characteristic design parameters of the column. The sorption performance of the Ni(II) ions through columns could be well described by the Thomas, Yoon–Nelson, and Wolborska models at effluent‐to‐influent concentration ratios (C/C₀) >0.03 and <0.99. Among the all models, the Clark model showed the least average percentage time deviation. The sorptive capacity of electroplating rinse water using Ni(II) was found to be 45.98 mg g^?1.     

Description of the small plastics fragments in marine sediments along the Alang-Sosiya ship-breaking yard, India

This study aimed to assess the accumulation of small plastic debris in the intertidal sediments of the world's largest ship-breaking yard at Alang-Sosiya, India. Small plastics fragments were collected by flotation and separated according to their basic polymer type under a microscope, and subsequently identified by FT-IR spectroscopy as polyurethane, nylon, polystyrene, polyester and glass wool. The morphology of these materials was also studied using a scanning electron microscope. Overall, there were on average 81 mg of small plastics fragments per kg of sediment. The described plastic fragments are believed to have resulted directly from the ship-breaking activities at the site.     

Pseudo Static Seismic Stability Analysis of Reinforced Soil Structures

The paper pertains to the pseudo-static seismic stability analysis of reinforced soil structures. Using limit equilibrium method and assuming the failure surface to be logarithmic spiral, analysis has been conducted to maintain internal stability against both tensile and pullout failure of the reinforcements. The external stability of the reinforced earth wall is also assessed in terms of its sliding, overturning, eccentricity and bearing modes of failure. The influence of the intensity of the surcharge load placed on the backfill is also considered in the analysis. The obtained results are validated by comparing the same with those reported in literature. Studies have also been made regarding the influence of backfill soil friction angle, horizontal and vertical seismic accelerations, surcharge load, the tensile strength of reinforcement, pullout length of the reinforcement and number of reinforcement layers on the seismic stability against various failure modes as mentioned earlier.     

Reliability assessment of internal stability of reinforced soil structures: A pseudo-dynamic approach

A methodology for reliability based optimum design of reinforced soil structures subjected to horizontal and vertical sinusoidal excitation based on pseudo-dynamic approach is presented. The tensile strength of reinforcement required to maintain the stability is computed using logarithmic spiral failure mechanism. The backfill soil properties, geometric and strength properties of reinforcement are treated as random variables. Effects of parameters like soil friction angle, horizontal and vertical seismic accelerations, shear and primary wave velocities, amplification factors for seismic acceleration on the component and system probability of failures in relation to tension and pullout capacities of reinforcement have been discussed. In order to evaluate the validity of the present formulation, static and seismic reinforcement force coefficients computed by the present method are compared with those given by other authors. The importance of the shear wave velocity in the estimation of the reliability of the structure is highlighted. The Ditlevsen's bounds of system probability of failure are also computed by taking into account the correlations between three failure modes, which is evaluated using the direction cosines of the tangent planes at the most probable points of failure.     

Distribution, enrichment and accumulation of heavy metals in coastal sediments of Alang-Sosiya ship scrapping yard, India

Since its inception in 1982, the Alang-Sosiya yard has become the largest ship scrapping works in the world. Several hundreds of ships arrive every year. The degree of heavy metal contamination has been studied in bulk and fine sediments from the intertidal zone of this ship scrapping yard, two stations, one on either side at 5 km distance and one reference station 60 km distance near Mahuva, towards the south. The samples have been subjected to a total digestion technique and analysed for elements: Cd, Co, Cu, Cr, Fe, Mn, Ni, Pb, Zn and Al, and %TOC. The absolute metal concentrations reflected variations in BF and FF sediment samples with organic matter content. Enrichment factors (EF) and geoaccumulation indices (Igeo) have been calculated and the relative contamination levels are assessed at these sites. At Alang-Sosiya, the enrichment of heavy metals has been observed to be relatively high.     

Heat-induced moisture transport in the vicinity of a spherical heat source

The present paper develops an analytical approach to the problem of heat-induced moisture movement in the vicinity of a spherical heat source embedded in an undeformable, moist porous solid of infinite extent. A transient-state distribution of temperature within the infinite medium is assumed to induce the moisture transport process. The numerical results, presented in the paper, illustrate the influence of the moisture transport characteristics on the time-dependent distribution of moisture within the porous medium. © 1998 John Wiley & Sons, Ltd.     

Effect of the annular solar eclipse of 15 January 2010 on the lower atmospheric boundary layer over a tropical rural station

This paper documents the effect of the annular solar eclipse of 15 January 2010 on the lower atmospheric boundary layer dynamics over a complex terrain environment at Gadanki (13.5°N, 79.2°E,) using a suite of instruments namely automatic weather station, mini boundary layer mast (15 m), Doppler SODAR, GPS radiosonde and ozonesonde observations. The net heating rates are estimated using radiative transfer algorithm before, during and after the eclipse. Effect on soil temperature is seen clearly up to 20 cm depth and at all the levels up to 15 m. Decrease in the thermal plume level, a dip in the surface layer and a strong vertical downdrafts (subsidence) are noticed during the peak eclipse. Upper layer winds did not show any variation during the eclipse. It is also found to have pronounced effect on all the surface meteorological parameters for a two-day period.     

Treatability of resin effluents by electrochemical oxidation using batch recirculation reactor

Electro oxidation processes are developed throughout the world for ambient temperature destruction of organic wastes. Several of these processes are based on mediated electrochemical oxidation. This article presents the experimental results of electro chemical study based on mediated electrochemical oxidation process conducted for synthetic organic ion exchange resin materials. Investigation was carried out using the traditional noble metal oxide coated anode, ruthenium oxide-titanium and the mediator used for the experiment was ferrous sulphate, with sodium chloride as supporting electrolyte. The concentration of sodium chloride was maintained at 5, 8, 12 gm/L. The experiment was carried out in batch recirculation reactor with varied current densities for various flow rates. The study highlighted that in batch reactor set up the best effect of total organic content reduction was found to occur at 3.75 A/dm² with flow rate of 20 L/h. The simulated studies were carried out for different volumes of effluent and current densities. A graphical analysis was made between the experimental and simulated values and it was found that both the values are very close.