Mapping Proterozoic unconformity-related uranium deposits in the Rockhole area, Northern Territory, Australia using landsat ETM+

The Rockhole area, Northern Territory, Australia, hosts a number of Proterozoic unconformity-related uranium deposits. The geology of the area features within Paleoproterozoic rocks of the Pine Creek Orogen, near the unconformity with overlying platform cover sandstone of the Paleo- to Mesoproterozoic McArthur Basin. Landsat Enhanced Thematic Mapper plus (ETM+) data was used in the Rockhole area to assist in mapping geological structures and lithology, and to identify anomalous concentrations of ferrous minerals, the product of alteration, which can be indicators of buried uranium mineralization. Several image-processing procedures were applied to the ETM+ data to identify, isolate and enhance mineralogical information as simple and complex false color composites. ETM+ 754 shown as red green and blue respectively was the best simple image. Overall, complex images based on Principal Component Analysis proved to be the most useful products. Sandstone, shale and siltstone, the target lithologies, Koolpin Formation, the target stratigraphic unit, and bleaching pattern due to the removal of iron(II) compounds, the target alteration pattern, were confidently mapped to provide information required by the mineral emplacement model, which ultimately identified areas of likely uranium mineralization. Thus the contrasting behavior of the two principle oxidation states of uranium and iron can be utilized to map/delineate bleached alteration zones associated with economic concentrations of uranium using multispectral sensors like Landsat or better hyperspectral sensors.     

Evaluation of geochemical impact of tsunami on Pichavaram mangrove ecosystem,southeast coast of India

The 26 December 2004-tsunami has deposited sediments in the Pichavaram mangrove ecosystem, east coast of India. Ten surface and three core sediment samples were collected within 30 days of the event and analyzed for nutrients. Water samples were also analyzed to see the impact of tsunami on the geochemical behavior of nutrients. An increase in the concentration of various nutrients namely nitrate and phosphate was observed. The geochemistry of the mangrove forest was observed to be influenced by a number of factors like rapid increase of aquaculture farms, agricultural practices and the anthropogenic discharge from the nearby-inhabited areas. Further the sediment column was disturbed due to energetic tsunami waves, which has caused a sheer increase in the dissolved oxygen in water. As a result, the change in the redox potential has resulted in change in the nutrients absorbed/associated with the sediments. In addition, role of retreating water after tsunami on the nutrient geochemistry was also evaluated.     

Whistler observations of the quiet time plasmasphere-ionosphere coupling fluxes at low latitude

Observations of whistlers during quiet times made at low-latitude ground station Nainital (geomag. lat. 19 1 N) are used to deduce plasmasphere-ionosphere coupling fluxes. The whistler data from 3 magnetically quiet days are presented that show a smooth decrease in dispersion with time. This decrease in dispersion is interpreted in terms of a corresponding decrease in electron content of tubes of ionization. The electron densities, electron tube contents (10¹⁶ el/m²-tube) and coupling fluxes (10 el m^–1 s^–2) are computed by means of an accurate curve fitting method developed by Tarcsai (1975) and are in good agreement with the results reported by other workers.     

Thermochemical and pressure-volume-temperature systematics of data on solids,examples: Tungsten and MgO

Data systematization using the constraints from the equation $$Cp = Cv + \alpha _P {}^2V_T K_T T$$ where C _p, C _v, α _p, K _T and V are respectively heat capacity at constant pressure, heat capacity at constant volume, isobaric thermal expansion, isothermal bulk modulus and molar volume, has been performed for tungsten and MgO. The data are $$K_T (W) = 1E - 5/(3.1575E - 12 + 1.6E - 16T + 3.1E - 20T^2 )$$ $$\alpha _P (W) = 9.386E - 6 + 5.51E - 9T$$ $$C_P (W) = 24.1 + 3.872E - 3T - 12.42E - 7T^2 + 63.96E - 11T^3 - 89000T^{ - 2} $$ $$K_T (MgO) = 1/(0.59506E - 6 + 0.82334E - 10T + 0.32639E - 13T^2 + 0.10179E - 17T^3 $$ $$\alpha _P (MgO) = 0.3754E - 4 + 0.7907E - 8T - 0.7836/T^2 + 0.9148/T^3 $$ $$C_P (MgO) = 43.65 + 0.54303E - 2T - 0.16692E7T^{ - 2} + 0.32903E4T^{ - 1} - 5.34791E - 8T^2 $$ For the calculation of pressure-volume-temperature relation, a high temperature form of the Birch-Murnaghan equation is proposed $$P = 3K_T (1 + 2f)^{5/2} (1 + 2\xi f)$$ Where $$K_T = 1/(b_0 + b_1 T + b_2 T^2 + b_3 T^3 )$$ $$f = (1/2)\{ [V(1,T)/V(P,T)]^{2/3} - 1\} $$ $$\xi = ({3 \mathord{\left/ {\vphantom {3 4}} \right. \kern-\nulldelimiterspace} 4})[K'_0 + K'_1 \ln ({T \mathord{\left/ {\vphantom {T {300}}} \right. \kern-\nulldelimiterspace} {300}}) - 4]$$ where in turn $$V(1,T) = V_0 [\exp (\int\limits_{300}^T {\alpha dT)]} $$ . The temperature dependence of the pressure derivative of the bulk modulus (K′₁) is estimated by using the shock-wave data. For tungsten the data are K′₀ = 3.5434, K′₁ = 0.032; for MgO K′₀ = 4.17 and K′₁ = 0.1667. For calculating the Gibbs free energy of a solid at high pressure and at temperatures beyond that of melting at 1 atmosphere, it is necessary to define a high-temperature reference state for the fictive solid.     

High rate anaerobic treatment of Sago wastewater using HUASB with PUF as carrier

Sago industry is one of the major small-scale sectors in India and over 800 units are located in the southern State of Tamilnadu. Processing of sago generates enormous quantities of high strength wastewater requiring systematic treatment prior to disposal. The present study is an attempt to treat the sago wastewater using Hybrid Upflow Anaerobic Sludge Blanket (HUASB) reactor, which offers the advantages of both fixed film and up flow anaerobic sludge blanket treatment. HUASB reactor with a volume of 5.6 L was operated at Organic Loading Rates varying from 10.7 to 24.7 kg COD/m³.day. After 130 days of startup, the reactor produced appreciable decrease in COD of wastewater and removed solids efficiently. The COD removal varied from 91–87%. While the removal of Total Solids was in the range of 61–57%, that of volatile solids varied from 70–67%. The ideal OLR for the reactor was 23.5 kg COD/m³.day. The findings of the study open up newer possibilities of design low cost and compact onsite treatment systems with very short retention periods.     

Correct nomenclature for the Angadimogar pluton, Kerala, southwestern India

The proper usage of modal composition and geochemical classification of granitoids is discussed for assigning a proper nomenclature for the Angadimogar pluton, Kerala, southwestern India. This discussion is mainly aimed at addressing questions concerning the nomenclature of Angadimogar pluton (syenitevs. granite). Modal composition and whole-rock XRD data clearly show that the pluton exposed near Angadimogar is a quartz-syenite and its geochemistry is typical of a ferroan, metaluminous, alkali (A-type) granitoid     

Charnockitic magmatism in southern India

Large charnockite massifs cover a substantial portion of the southern Indian granulite terrain. The older (late Archaean to early Proterozoic) charnockites occur in the northern part and the younger (late Proterozoic) charnockites occur in the southern part of this high-grade terrain. Among these, the older Biligirirangan hill, Shevroy hill and Nilgiri hill massifs are intermediate charnockites, with Pallavaram massif consisting dominantly of felsic charnockites. The charnockite massifs from northern Kerala and Cardamom hill show spatial association of intermediate and felsic charnockites, with the youngest Nagercoil massif consisting of felsic charnockites. Their igneous parentage is evident from a combination of features including field relations, mineralogy, petrography, thermobarometry, as well as distinct chemical features. The southern Indian charnockite massifs show similarity with high-Ba-Sr granitoids, with the tonalitic intermediate charnockites showing similarity with high-Ba-Sr granitoids with low K₂O/Na₂O ratios, and the felsic charnockites showing similarity with high-Ba-Sr granitoids with high K₂O/Na₂O ratios. A two-stage model is suggested for the formation of these charnockites. During the first stage there was a period of basalt underplating, with the ponding of alkaline mafic magmas. Partial melting of this mafic lower crust formed the charnockitic magmas. Here emplacement of basalt with low water content would lead to dehydration melting of the lower crust forming intermediate charnockites. Conversely, emplacement of hydrous basalt would result in melting at higher {ie565-01} favoring production of more siliceous felsic charnockites. This model is correlated with two crustal thickening phases in southern India, one related to the accretion of the older crustal blocks on to the Archaean craton to the north and the other probably related to the collision between crustal fragments of East and West Gondwana in a supercontinent framework.     

High-Ti type N-MORB parentage of basalts from the south Andaman ophiolite suite,India

A complete dismembered sequence of ophiolite is well exposed in the south Andaman region that mainly comprises ultramafic cumulates, serpentinite mafic plutonic and dyke rocks, pillow lava, radiolarian chert, and plagiogranite. Pillow lavas of basaltic composition occupy a major part of the Andaman ophiolite suite (AOS). These basalts are well exposed all along the east coast of southern part of the south AOS. Although these basalts are altered due to low-grade metamorphism and late hydrothermal processes, their igneous textures are still preserved. These basalts are mostly either aphyric or phyric in nature. Aphyric type exhibits intersertal or variolitic textures, whereas phyric variety shows porphyritic or sub-ophitic textures. The content of alkalies and silica classify these basalts as sub-alkaline basalts and alkaline basalts. A few samples show basaltic andesite, trachy-basalt, or basanitic chemical composition. High-field strength element (HFSE) geochemistry suggests that studied basalt samples are probably derived from similar parental magmas. Al₂O₃/TiO₂ and CaO/TiO₂ ratios classify these basalts as high-Ti type basalt. On the basis of these ratios and many discriminant functions and diagrams, it is suggested that the studied basalts, associated with Andaman ophiolite suite, were derived from magma similar to N-MORB and emplaced in the mid-oceanic ridge tectonic setting.     

Geochemistry of Early Cretaceous Alkaline Ultramafic-Mafic Complex from Jasra, Karbi Anglong, Shillong Plateau, Northeastern India

An early Cretaceous alkaline ultramafic-mafic complex is emplaced within the Proterozoic rocks of Shillong plateau at Jasra, Karbi Anglong district of Assam. It is associated to the fracture system of Barapani-Tyrsad shear zone, Kopali faults, and Um Ngot lineaments and mainly comprises pyroxenite, gabbro and nepheline syenite. Few small mafic dykes, emplaced within pyroxenitic and granitic plutons, are also reported. No such dyke is reported to cut gabbros or nepheline syenites. Nepheline syenites occur either in the form of small dykes in pyroxenites or as differentiated bodies in the gabbros. Mineralogical and chemical composition of pyroxenite and gabbro clearly indicate their affinity to the alkaline magmatism. Syenitic samples show miaskitic character (agpaitic index <1), also indicates affinity with alkaline-carbonatite magmatism. Calcite is encountered in a number of pyroxenite samples. From the presented petrological and geochemical data it is difficult to establish any significant genetic relationship through simple differentiation process between these rocks. These data probably suggest that these rocks are derived from a primary carbonatite magma, generated by the low-degree melting of a metasomatized mantle peridotite. CO₂ released by this process also progressively metasomatizes the lherzolite to an alkaline wehrlite and melts derived from alkaline wehrlite (ultrabasic alkaline silicate magma) may be responsible for crystallization of Jasra alkaline ultramafic-mafic rocks.     

Modeling of local ionospheric time varying characteristics based on singular value decomposition over low-latitude GPS stations

Singular Value Decomposition (SVD) model is implemented to recognize the Total Electron Content (TEC) time series of daily, temporal as well as seasonal characteristics throughout the 24th solar cycle period of the year 2015 in the study. The Vertical (vTEC) analysis has been carried out with Global Positioning System (GPS) data sets collected from five stations from India namely GNT, Guntur (16.44^° N, 80.62^° E), and IISC, Bangalore (12.97^° N, 77.59^° E), LCK2, Lucknow (26.76^° N, 80.88^° E), one station from Thailand namely AITB, Bangkok (14.07^° N, 100.61^° E), and one station from South Andaman Island namely PBR, Port Blair (11.43^° N, 92.43^° E), located in low latitude region. The first five singular value modes constitute about 98% of the total variance, which are linearly transformed from the observed TEC data sets. So it is viable to decrease the number of modeling parameters. The Fourier Series Analysis (FSA) is carried out to characterize the solar-cycle, annual and semi-annual dependences through modulating the first three singular values by the solar (F10.7) and geomagnetic (Ap) indices. The positive correlation coefficient (0.75) of daily averaged GPS–TEC with daily averaged F10.7 strongly supports the temporal variations of the ionospheric features depends on the solar activity. Further, the significance and reliability of the SVD model is evaluated by comparing it with GPS–TEC data and the standard global model (Standard Plasma-Spherical Ionospheric Model, SPIM and International Reference Ionosphere, IRI 2016).