Analysis of a rigid footing lying on three-layered soil using the finite difference method

A numerical procedure is described for the analysis of the vertical deformation and the stress distribution of the strip footings on layered soil media. Three layers of soil with different stiffness are considered with the middle soil layer the thinnest and most stiff layer. The soil media is discretized and using the theory of elasticity, the governing differential equations are obtained in terms of vertical and horizontal displacements. These equations along with appropriate boundary and continuity conditions are solved by using the finite difference method. The vertical and horizontal displacements, strains and stresses are found at various nodes in the soil media. Parametric studies are carried out to study the effect of the placement depth of the middle soil layer, the relative ratios of the moduli of deformation of the soil layers on the vertical displacement of the footing and the vertical stress distribution. These studies reveal that the middle thin but very stiff layer acts like a plate and redistributes the stresses on the lower soft soil layer uniformly. The displacement on the top and bottom of the middle soil layer is almost the same showing that the compression of the middle layer is negligible as it is very stiff.     

Modeling of Beams on Reinforced Granular Beds

The paper describes a mechanical model for estimating the flexural response of a strip footing, supporting a column (imposing a concentrated load), resting on a compacted granular bed overlying a reinforcement layer for example, geogrids, geomats etc. below which lies a loose soil deposit. The footing is idealized as a beam and the reinforcing element is assumed to have finite bending stiffness and negligible frictional resistance. The upper and lower soil layers are idealized by a series of linear and discrete springs (Winkler springs) of different stiffness values. To find the response of such a model the governing differential equations have been derived and expressed in a nondimensional form. A closed form analytical solution of the same has been obtained subjected to appropriate boundary conditions. Using the present approach the resulting solution for a degenerated case of a long beam is found to be identical to the same of Hetenyi (1946, Beams on elastic foundations, University of Michigan press, Ann Arbor, MI). Parametric studies reveal that the ratio of flexural rigidity of upper and lower beam and the ratio of stiffness of the upper and lower soil layers affect significantly the response of the foundation.     

Construction and Characterization of Transportable Calibration Pads for Calibration of Portable and Airborne Gamma Ray Spectrometers in India

Characterization of the Panandhro lignite deposits from western Indian state of Gujarat, based on the geochemical and palynological evidences, has been performed to assess the floral composition, maturity and hydrocarbon potential of the sequence. Elementally, the lignites consist of moderate carbon, low hydrogen and moderate sulfur contents. The samples are characterized by high TOC contents (lignite: av. 46.43 wt.%, resin: 62.47 wt.%). The average HI values for the lignite is 136 mg HC/g TOC, and that of the associated resin is 671 mg HC/g TOC. The highest T_max is recoded in lignite (422°C) and lowest in the resin (39°C) samples. The FTIR spectrum of lignite is characterized by highly intense OH stretching peak ~3350 cm^-1, aliphatic CH_x stretching peaks between 3000-2800 cm^-1, aromatic C=O stretching and an aromatic C=C stretching. The spectrum of resin shows strongest absorption due to aliphatic CHx stretching between 2940-2915 cm^-1 and 2870-2850 cm^-1, and deformation by the medium peak between 1450 and 1650 cm^-1. The recovered palynofloral assemblage indicates the dominance of angiosperm pollen grains with maximum abundance of Arecaceae family, and subdominant pteridophytic spores. Marine influence is indicated by the presence of abundant dinoflagellate cysts. The occurrence of flora from a variety of ecological niches suggests a luxuriant diverse vegetation pattern existed in the vicinity of depositional site under humid tropical conditions. The overall characteristics of the lignite deposits point towards their ability to generate (upon maturation) hydrocarbons as they have types III–II admixed kerogen (organic matters).     

Intercomparison of Oceansat-2 and ASCAT Winds with In Situ Buoy Observations and Short-Term Numerical Forecasts

Sea surface winds from the Oceansat-2 scatterometer (OSCAT) are important inputs to Numerical Weather Prediction (NWP) models. The Indian Space Research Organization (ISRO) recently updated the OSCAT retrieval algorithm in order to generate better products. An attempt has been made in this study to evaluate the updated OSCAT winds using buoy observations and the 6-hour short-term forecasts from the T574L64 model from the National Centre for Medium Range Weather Forecasting (NCMRWF) during the 2011 monsoon. The results of the OSCAT evaluation are also compared with those from the Advanced Scatterometer (ASCAT) on-board the Meteorological Operational Satellite-A (MetOp-A) which were evaluated in the same way. The root mean square differences (RMSDs) for wind speed and direction, are within 2?m?s^?1 and 20° for both scatterometers. The RMSDs for OSCAT are slightly higher than those for ASCAT, and this difference may be attributed in part to the difference in frequency and resolution of the scatterometer payloads. The bias and standard deviation for ASCAT winds are also lower than those for OSCAT winds with respect to the model short-range forecast, and this can be attributed to the regular assimilation of ASCAT winds in the model.     

Strange quark matter attached to string cloud in Bianchi type-III space time

We have obtained Bianchi type-III cosmological model with strange quark matter attached to the string cloud in general relativity. For solving the Einstein’s field equations the relation [C=A ⁿ ] between metric coefficients C and A is used. Also, some physical and kinematic properties of the model are discussed.The results are analogous to results obtained by Yilmaz (Gen. Rel. Grav. 38:1397–1406, 2006).     

LRS Bianchi type-I models with constant deceleration parameter in?creation field cosmology

We have studied Locally Rotationally Symmetric (LRS) Bianchi type-I space-time having constant deceleration parameter and filled with perfect fluid in the Hoyle-Narlikar C-field cosmology. Here, the creation field C is a function of time t only. The geometrical and physical aspects for the models are also studied.     

Identification of Water Conservation Sites in a Watershed (WRJ-2) of Nagpur District, Maharashtra using Geographical Information System (GIS) Technique

The paper deals with the application of Remote Sensing and Geographical Information System (GIS) technique for a watershed development program. For this study, the WRJ-2 watershed falling under Narkhed and Katol Tahsils of Nagpur district, Maharashtra, India is investigated. Various thematic maps (i.e. drainage, geology, soil, geomorphology and land use/ land cover) have been prepared using the remote sensing and GIS techniques. Initially, differential weightage values are assigned to all the thematic maps as per their runoff characteristics. Subsequently, the maps are integrated in GIS environment to identify potential sites for water conservation measures like gully plugs, earthen check dams, continuous contour trenches, percolation tanks, cement bandhara, afforestration and farm ponds, etc. The study depicts that the GIS technique facilitates integration of thematic maps and thereby helps in an identification of micro-zones each with unique characters in-terms of hydrogeology, thus amenable to specific water conservation techniques. It is therefore concluded that, the GIS technique is suitable for an identification of water conservation structures.     

Evolution of anthropogenic and biomass burning emissions of air pollutants at global and regional scales during the 1980�C2010 period

Several different inventories of global and regional anthropogenic and biomass burning emissions are assessed for the 1980?C2010 period. The species considered in this study are carbon monoxide, nitrogen oxides, sulfur dioxide and black carbon. The inventories considered include the ACCMIP historical emissions developed in support of the simulations for the IPCC AR5 assessment. Emissions for 2005 and 2010 from the Representative Concentration Pathways (RCPs) are also included. Large discrepancies between the global and regional emissions are identified, which shows that there is still no consensus on the best estimates for surface emissions of atmospheric compounds. At the global scale, anthropogenic emissions of CO, NO_x and SO₂ show the best agreement for most years, although agreement does not necessarily mean that uncertainty is low. The agreement is low for BC emissions, particularly in the period prior to 2000. The best consensus is for NO_x emissions for all periods and all regions, except for China, where emissions in 1980 and 1990 need to be better defined. Emissions of CO need better quantification in the USA and India for all periods; in Central Europe, the evolution of emissions during the past two decades needs to be better determined. The agreement between the different SO₂ emissions datasets is rather good for the USA, but better quantification is needed elsewhere, particularly for Central Europe, India and China. The comparisons performed in this study show that the use of RCP8.5 for the extension of the ACCMIP inventory beyond 2000 is reasonable, until more global or regional estimates become available. Concerning biomass burning emissions, most inventories agree within 50?C80%, depending on the year and season. The large differences between biomass burning inventories are due to differences in the estimates of burned areas from the different available products, as well as in the amount of biomass burned.     

Probabilistic Analysis and Design of a Strip Footing on Layered Soil Media

In the present paper, the analysis of a strip footing resting on a layered soil system has been carried out considering the elastic moduli of soil layers as random variables. Three layers of soil have been considered and the analysis employs Monte Carlo simulation. The modulus of elasticity has been considered as random variable having lognormal distribution. Factors of safety with respect to settlement of footing and the interfacial stresses have been determined and have been related to the associated risk factor and coefficient of variation of the random variable. A detailed parametric study revealed that for a given risk level, the factors of safety is strongly dependent on the coefficient of variation of elastic modulus and only mildly upon other parameters of the soil?Cfoundation system. This facilitated the development of closed form equations for the upper bounds on factors of safety only in terms of allowable risk of failure and the coefficient of variation of elastic modulus.     

Macrobenthos of Kakinada Bay in the Godavari delta, East coast of India: comparing decadal changes

A one-year study (1995–1996) on the macrobenthos over a spread of (37) hydrographically differing GPS-fixed sites in Kakinada Bay (mean salinity 27.16±0.4) and adjacent mangrove channels (14.78±0.55) in the Godavari delta, one of India's largest estuarine systems, revealed a great preponderance of benthic life. There were 11 diverse taxa represented by 95 species collected through several (303) grab and dredge hauls. Based on Bray-Curtis similarity through hierarchical clustering implemented in PRIMER, it was possible to distinguish the benthos into four assemblages each of which represented sites in the Central and North bay (Paphia textrix – Typhlocarcinus sp. Assemblage), South-East bay (Protankyra similis – Paphia malabarica Assemblage), Mangrove Outlets (Cerithidea cingulata Assemblage) and Mangrove channels (Diopatra neapolitana Assemblage). Benthos densities (mean nos. dredge haul⁻¹) were highest (299 individuals) at sites close to mangrove outlets. Species diversity (Margalef, d; Shannon-Wiener, H′) was low in general (d 1.244 to 2.251 and H′ 0.038 to 1.502). Sediments were mostly clayey-silt in nature except in southeast bay where they are silt-sand. Organic matter (mean) was at or near 1.3%. The observations have revealed marked changes in benthic community structure relative to an earlier investigation held in 1958–1963 in this area. Over the years, species such as Turritella duplicata, Tonna dolium and Placuna placenta found in considerable numbers previously have dwindled. Anomia, Bursa and Atrina and echinoderms, Astropecten indica, Echinodiscus auritus and Temnopleurus toreumaticus and the brachiopod, Lingula sp. of common occurrence in early 60s are absent altogether attributable to long-term natural trends during the intervening years and/or events accompanying human impingement (e.g. industrial and urban growth, port expansion measures, aquaculture, mangrove denudation etc.). Despite such large-scale alterations in benthos community structure, there were no significant changes in “biodiversity” measured through Average Taxonomic Distinctness (AvTD) and Variation in Taxonomic Distinctness (VarTD). The investigation revealed that AvTD (Δ⁺) and VarTD (Λ⁺) for previous years and the present study remained well within the 95% confidence funnel implying taxonomic stability. It was found that species, which had replaced the earlier forms, were drawn from comparable (Linnean) hierarchy i.e. same phylum/class.