Geophysical evidence of mud diapirism on the Mediterranean Ridge accretionary complex

Mud volcanoes, mud cones, and mud ridges have been identified on the inner portion of the crestal area, and possibly on the inner escarpment, of the Mediterranean Ridge accretionary complex. Four areas containing one or more mud diapirs have been investigated through bathymetric profiling, single channel seismic reflection profiling, heat flow measurements, and coring. A sequence of events is identified in the evolution of the mud diapirs: initially the expulsion on the seafloor of gasrich mud produces a seafloor depression outlined in the seismic record by downward dip of the host sediment reflectors towards the mud conduit; subsequent eruptions of fluid mud may create a flat topped mud volcano with step-like profile; finally, the intrusion of viscous mud produces a mud cone.The origin of the diapirs is deep within the Mediterranean Ridge. Although a minimum depth of about 400 m below the seafloor has been computed from the hydrostatic balance between the diapiric sediments and the host sediments, a maximum depth, suggested by geometric considerations, ranges between 5.3 and 7 km. The presence of thermogenic gas in the diapiric sediments suggests a better constrained origin depth of at least 2.2 km.The heat flow measured within the Olimpi mud diapir field and along a transect orthogonal to the diapiric field is low, ranging between 16 ± 5 and 41 ± 6 mW m^–2. Due to the presence of gas, the thermal conductivity of the diapiric sediments is lower than that of the host hemipelagic oozes (0.6–0.9 and 1.0–1.15 W m^–1 K^–1 respectively).We consider the distribution of mud diapirs to be controlled by the presence of tectonic features such as reverse faults or thrusts (inner escarpment) that develop where the thickness of the Late Miocene evaporites appears to be minimum. An upward migration through time of the position of the décollement within the stratigraphic column from the Upper Oligocene (diapiric sediments) to the Upper Miocene (present position) is identified.     

Geophysical Evidence of a Relict Oceanic Crust in the Southwestern Scotia Sea

The southwestern part of the Scotia Sea, at the corner of the Shackleton Fracture Zone with the South Scotia Ridge has been investigated, combining marine magnetic profiles, multichannel seismic reflection data, and satellite-derived gravity anomaly data. From the integrated analysis of data, we identified the presence of the oldest part of the crust in this sector, which tentative age is older than anomaly C10 (28.7 Ma). The area is surrounded by structural features clearly imaged by seismic data, which correspond to gravity lows in the satellite-derived map, and presents a rhomboid-shaped geometry. Along its southern boundary, structural features related to convergence and possible incipient subduction beneath the continental South Scotia Ridge have been evidenced from the seismic profile. We interpret this area, now located at the edge of the south-western Scotia Sea, as a relict of ocean-like crust formed during an earlier, possibly diffuse and disorganized episode of spreading at the first onset of the Drake Passage opening. The successive episode of organized seafloor spreading responsible for the opening of the Drake Passage that definitively separated southern South America from the Antarctic Peninsula, instigated ridge-push forces that can account for the subduction-related structures found along the western part of the South Scotia Ridge. This seafloor accretion phase occurred from 27 to about 10 Ma, when spreading stopped in the western Scotia Sea Ridge, as resulted from the identification of the marine magnetic anomalies.     

Seismic structure and tectonics of the Shackleton Fracture Zone (Drake Passage,Scotia Sea)

The structural framework of the southern part of the Shackleton Fracture Zone has been investigated through the analysis of a 130-km-long multichannel seismic reflection profile acquired orthogonally to the fracture zone near 60° S. The Shackleton Fracture Zone is a 800-km-long, mostly rectilinear and pronounced bathymetric lineation joining the westernmost South Scotia Ridge to southern South America south of Cape Horn, separating the western Scotia Sea plate from the Antarctic plate. Conventional processing applied to the seismic data outlines the main structures of the Shackleton Fracture Zone, but only the use of enhanced techniques, such as accurate velocity analyses and pre-stack depth migration, provides a good definition of the acoustic basement and the architecture of the sedimentary sequences. In particular, a strong and mostly continuous reflector found at about 8.0 s two-way traveltime is very clear across the entire section and is interpreted as the Moho discontinuity. Data show a complex system of troughs developed along the eastern flank of the crustal ridge, containing tilted and rotated blocks, and the presence of a prominent listric normal fault developed within the oceanic crust. Positive flower structures developed within the oceanic basement indicate strike-slip tectonism and partial reactivation of pre-existing faults. Present-day tectonic activity is found mostly in correspondence to the relief, whereas fault-induced deformation is negligible across the entire trough system. This indicates that the E–W-directed stress regime present in the Drake Passage region is mainly dissipated along a narrow zone within the Shackleton Ridge axis. A reappraisal of all available magnetic anomaly identifications in the western Scotia Sea and in the former Phoenix plate, in conjunction with new magnetic profiles acquired to the east of the Shackleton Fracture Zone off the Tierra del Fuego continental margin, has allowed us to propose a simple reconstruction of Shackleton Fracture Zone development in the general context of the Drake Passage opening.     

Vertical Distribution of Meiobenthos in Bathyal Sediments of the Eastern Mediterranean Sea: Relationship with Labile Organic Matter and Bacterial Biomasses

Abstract. Quantitative information on the vertical distribution of meiofaunal abundances and biomass were obtained from samples collected at 3 bathyal stations in the Eastern Mediterranean Sea located at the same depth but characterized by different food supply. Vertical distribution patterns of nieiofauna were investigated in relation to the biochemical composition of the sediment organic matter (proteins, carbohydrates, and lipids) and compared to benthic bacterial standing stocks. No significant relationship between bacteria and meiofauna was found, whereas a significant relationship between protein and lipid concentrations and total meiofauna density was observed. These data suggest that labile organic matter. considered as material readily aVdihbk to benthic consumers, may be an important factor regulating meiofaunal abundance and vertical distribution in deep-sea sediments.     

Methodical series tests for fuller ship hull forms

In recent years many fuller ship hull forms have been designed and constructed in various shipbuilding countries, but the data available for the development of the fuller forms are inadequate from the point of view of preliminary ship design. In this paper the authors describe how they have systematically tested vessel forms of block coefficients ranging from 0.80 to 0.90. The analysis and presentation of the test results have been made in such a manner that designers can produce hull forms like those of tankers and other bulk carriers quickly and reliably.     

Determination of cadmium(II), copper(II), manganese(II) and nickel(II) species in Antarctic seawater with complexing resins

The strong species of cadmium(II), copper(II), manganese(II) and nickel(II) in an Antarctic seawater sample are investigated by a method based on the sorption of metal ions on complexing resins. The resins compete with the ligands present in the sample to combine with the metal ions. Two resins with different adsorbing strengths were used. Very stable metal complexes were investigated with the strong sorbent Chelex 100 and weaker species with the less strong resin, Amberlite CG-50. Strong species were detected for three of the considered metal ions, but not for Mn(II). Cu(II) is completely linked to species with a side reaction coefficient as high as log α_M(I) = 11.6 at pH = 7.3. The ligand concentration was found to be similar to that of the metal ion, and the conditional stability constant was around 10²⁰ M^− 1. In the considered sample, only a fraction of the metal ions Cd(II) and Ni(II) is bound to the strong ligands, with side reaction coefficients equal to log α_M(I) = 5.5 and 6.5 at pH = 7.3 for Cd(II) and Ni(II), respectively. These findings were confirmed by the test with the weaker sorbent Amberlite CG-50. It can be calculated from the sorption equilibria that neither Mn(II) nor Ni(II) is adsorbed on Amberlite CG-50 under the considered conditions and, in fact, only a negligible fraction of Mn(II) and Ni(II) was adsorbed. A noticeable fraction of Cd(II) was adsorbed on Amberlite CG-50, meaning that cadmium(II) is partially linked to weak ligands, possibly chloride, while no copper(II) was adsorbed on this resin, confirming that copper(II) is only combined in strong species. These results are similar, but not identical, to those obtained for other seawater samples examined in previous investigations.     

A depocenter of organic matter at 7800 m depth in the SE Pacific Ocean

The Atacama trench, the deepest ecosystem of the southern Pacific Ocean (ca. 8000 m depth) was investigated during the Atacama Trench International Expedition. Sediments, collected at three bathyal stations (1040–1355 m depth) and at a hadal site (7800 m) were analyzed for organic matter quantity and biochemical composition (in terms of phytopigments, proteins, carbohydrates and lipids), bacterial abundance, biomass and carbon production and extracellular enzymatic activities. Functional chlorophyll-a (18.0±0.10 mg m⁻²), phytodetritus (322.2 mg m⁻²) and labile organic carbon (16.9±4.3 g C m⁻²) deposited on surface sediments at hadal depth (7800 m) reached concentrations similar to those encountered in highly productive shallow coastal areas. High values of bacterial C production and aminopeptidase activity were also measured (at in situ temperature and 1 atm). The chemical analyses of the Atacama hadal sediments indicate that this trench behaves as a deep oceanic trap for organic material. We hypothesize that, despite the extreme physical conditions, benthic microbial processes might be accelerated as a result of the organic enrichment.     

Automatic equipment to monitor groundwater radon

Prototype instrumentation, able to automatically measure groundwater radon content variations, is presented. The equipment is made of stainless steel and has spherical valves with automatic and pneumatic control. The deemanation of the gases from the water is obtained by evacuating a suitable expansion chamber. The instrumentation can make discrete sampling ranging from 1 per hour to 1 per 99 hours. The equipment was tested in the laboratory: the efficiency was measured by means of a²⁶⁶Ra solution. A mean value of (0.65±0.07) count/s/Bq was obtained. A calibration test was carried out by comparing countings from the automatic equipment with those obtained by the standard laboratory cell. Results of an operational check over a period of approximately one year indicate that variations in radon at the calibration site are attributable more to meteorological than to tectonic causes.     

Crystal chemistry of a highly disordered Mg-Al natural spinel

Summary A Mg-Al spinel from a xenolith found in the Sacrofano volcanic area (Latium, Italy) was investigated by X-ray single crystal diffraction and electron microprobe. Its main structural parameters were: a₀ = 8.0922(3) Å and the oxygen coordinate u = 0.26213(4), which gave to tetrahedral and octahedral bond distances of 1.9220(6) Å and 1.9299(3) Å respectively. Cation distribution, obtained from structural and chemical data, showed a very high Mg-Al disorder, with an Al(T) content of 0.205 and an inversion parameter, i, of about 0.23. Comparison with the cation distribution of a spinel with similar chemical composition but occurring in chlorite schists (Shishimsk Mountains, Urals, Russia) with a₀ = 8.1003(3) Å and u=0.26330(3), and with data from the literature concerning spinels from metamorphosed limestones (Kalkbro, Sweden) and websteritic dikes (Balmuccia, Italy), all characterized by much lower Mg-Al disorder (i about 0.13–0.12), suggests a completely different thermal history, with rapid cooling rates and consequent high closure temperature of intracrystalline exchange, consistent with the Sacrofano geological environment.

---

Kristallchemie eines stark ungeordneten, natürlichen Mg-Al-Spinells

Zusammenfassung Ein Mg-Al-Spinell aus einem Xenolith des Vulkangebiets von Sacrifano (Latium, Italien) wurde mit Röngten-Einkristallmethoden und der Elektronenmikrosonde untersucht. Die wichtigsten Strukturparameter sind a_o = 8,0922(3) Å und die Sauerstoffkoordinate u = 0,26213(4), was zu den tetraedrischen und oktaedrischen Bindungsabständen von 1,9220(6) Å bzw. 1,9299(3) Å führt. Die aus den strukturellen und chemischen Daten erhaltene Kationenverteilung zeigt eine sehr starke Unordnung Mg-Al mit einem Al (T)-Gehalt von 0,205 und einem Inversionsparameteri von ca. 0,23. Der Vergleich mit der Kationenverteilung eines Spinells ähnlicher chemischer Zusammensetzung, aber aus Chloritschiefern (Schischimsk-Berge, Ural, Rußland) mit a₀ = 8,1003(3) Å und u=0,26330(3), sowie mit Literaturdaten über Spinelle aus metamorphen Kalken (Kalkbro, Schweden) und websteritischen Gängen (Balmuccia, Italien), die alle durch eine viel geringere Mg-Al-Unordnung charakterisiert sind (i etwa 0,13–0,12), weist auf eine völlig andere thermische Geschichte hin, und zwar mit rascher Abkühlungsgeschwindigkeit und hoher Schließungstemperatur des intrakristallinen Austausches, was mit den geologischen Verhältnissen von Sacrofino in Übereinstimmung steht.