Post-mid-Cretaceous eastern North Sea evolution inferred from 3D thermo-mechanical modelling

The Late Cretaceous–Cenozoic evolution of the eastern North Sea region is investigated by 3D thermo-mechanical modelling. The model quantifies the integrated effects on basin evolution of large-scale lithospheric processes, rheology, strength heterogeneities, tectonics, eustasy, sedimentation and erosion.

The evolution of the area is influenced by a number of factors: (1) thermal subsidence centred in the central North Sea providing accommodation space for thick sediment deposits; (2) 250-m eustatic fall from the Late Cretaceous to present, which causes exhumation of the North Sea Basin margins; (3) varying sediment supply; (4) isostatic adjustments following erosion and sedimentation; (5) Late Cretaceous–early Cenozoic Alpine compressional phases causing tectonic inversion of the Sorgenfrei–Tornquist Zone (STZ) and other weak zones.

The stress field and the lateral variations in lithospheric strength control lithospheric deformation under compression. The lithosphere is relatively weak in areas where Moho is deep and the upper mantle warm and weak. In these areas the lithosphere is thickened during compression producing surface uplift and erosion (e.g., at the Ringkøbing–Fyn High and in the southern part of Sweden). Observed late Cretaceous–early Cenozoic shallow water depths at the Ringkøbing–Fyn High as well as Cenozoic surface uplift in southern Sweden (the South Swedish Dome (SSD)) are explained by this mechanism.

The STZ is a prominent crustal structural weakness zone. Under compression, this zone is inverted and its surface uplifted and eroded. Contemporaneously, marginal depositional troughs develop. Post-compressional relaxation causes a regional uplift of this zone.

The model predicts sediment distributions and paleo-water depths in accordance with observations. Sediment truncation and exhumation at the North Sea Basin margins are explained by fall in global sea level, isostatic adjustments to exhumation, and uplift of the inverted STZ. This underlines the importance of the mechanisms dealt with in this paper for the evolution of intra-cratonic sedimentary basins.     

Glacier outburst floods reconstructed from lake sediments and their implications for Holocene variations of the plateau glacier Folgefonna in western Norway

A sudden release of large volumes of water during a glacier outburst flood (GLOF) is a major hazard worldwide. Here, we identify the sedimentary signature of glacial and non‐glacial processes, including GLOFs, based on lacustrine sediments from the distal glacier‐fed Lake Buarvatnet in western Norway. Historically documented GLOFs in 2002 CE and during the 1980s CE are identified in the ²¹⁰Pb‐ and ¹⁴C‐dated sediments. These events have the same sedimentary signature as 12 earlier events throughout the Holocene interpreted to represent previous GLOFs in the catchment. The GLOFs are interpreted to have occurred during periods when the glacier extent was similar to the modern positions, and the events are thus used to pinpoint past positions of the glacier terminus and, hence, the equilibrium line altitudes (ELAs). The results indicate that the glacier Svartenutbreen, located at the eastern part of Folgefonna, had a similar size in 2002 CE as c. 8200–8300 cal. a BP, corresponding to the 8.2 ka event in the North Atlantic region. The regrowth of Sørfonna after the Holocene Thermal Optimum occurred at c. 6900 cal. a BP and Svartenutbreen was at modern size and extent in the periods c. 6400, c. 5450, c. 4850, c. 3850, c. 3550 and c. 1650 cal. a BP. Since 1650 cal. a BP, we infer that the glacier was larger than the 2002 CE glacier extent until 1910 CE when a GLOF occurred. Svartenutbreen has been retreating since 1910 CE, which led to the ice damming of the two historical GLOFs in the 1980s and 2002 CE separated by a glacier advance in the 1990s CE. The findings are discussed and compared to other regional glacier reconstructions in Norway, and emphasize the value of identifying and utilizing GLOFs as an indicator of past ELA variability.     

Oxygen and nutrient dynamics within mats of the filamentous macroalga Chaetomorpha linum

Concentration profiles of O₂, NH₄ ⁺, NO₃ ⁻, and PO₄ ³⁻ were measured at high spatial resolution in a 12-cm thick benthic mat of the filamentous macroalga Chaetomorpha linum. Oxygen and nutrient concentration profiles varied depending on algal activity and water turbulence. High surface irradiance stimulated O₂ production in the surface layers and introduced O₂ to deeper parts of the mat while the bottom layers of the mat and the underlying sediment were anoxic. Nutrient concentrations were highest in the bottom layers of the mat directly above the sediment nutrient source and decreased towards the surface layers due to algal assimilation and enhanced mixing with the overlying water column. Increased turbulence during windy periods resulted in more homogeneous oxygen and nutrient concentration profiles and shifted the oxic-anoxic interface downward. Denitrification within the mat, as measured by the isotope pairing technique on addition of ¹⁵NO₃ ⁻, was found to take place directly below the oxic-anoxic interface. Denitrification activity was always due to coupled nitrification-denitrification, whereby nitrifiers in the mat utilize NH₄ ⁺ diffusing from below and O₂ diffusing from above. The denitrification rate in the mat ranged from 22 μmol m⁻² h⁻¹ to 28 μmol m⁻² h⁻¹, approximately equivalent to that measured in the surrounding nonvegetated sediment. Although sediment denitrification is suppressed when the sediment surface is covered by a dense macroalgal mat, the denitrification zone may migrate up into the mat. In eutrophic estuaries with a large area of macroalgal cover, the physical structure and growth stage of algal mats may thus play an important role in the regulation of nitrogen removal by denitrification.     

银川市初夏气溶胶粒子谱分布特征

利用美制APS—3310A型激光粒谱仪，在中国西北城市银川对大气气溶胶粒子进行现场观测，结合气象条件，并通过理论计算分析，给出了银川市初夏大气气溶胶的日变化特征、3种不同粒径粒子分布特点及飘尘谱分布特征，以期为银川市大气污染总量控制方案及对策提供科学依据。     

Comparison of isotope pairing and N2:Ar methods for measuring sediment denitrification—Assumption, modifications, and implications

Denitrification has been measured during the last few years using two different methods in particular: isotope pairing measured on a triple-collector isotopic ratio mass spectrometer and N₂:Ar ratios measured on a membrane inlet mass spectrometer (MIMS). This study compares these two techniques in short-term batch experiments. Rates obtained using the original N₂∶Ar method were up to 3 to 4 times higher than rates obtained using the isotope pairing technique due to O₂ reacting with the N₂ during MIMS analysis. Oxygen combines with N₂ within the mass spectrometer ion source forming NO⁺ which reduces the N₂ concentration. The decrease in N₂ is least at lower O₂ concentrations and since oxygen is typically consumed during incubations of sediment cores, the result is often a pseudo-increase in N₂ concentration being interpreted as denitrification activity. The magnitude of this ocygen effect may be instrument specific. The reaction of O₂ with N₂ and the subsequent decrease in N₂ was only partly correctly using an O₂ correction curve for the relationship between N₂ and O₂ concentrations. The O₂ corrected N₂∶Ar denitrification rates were lower, but still did not match the isotope pairing rates and the variability between replicates was much higher. Using a copper reduction column heated to 600°C to remove all of the O₂ from the sample before MIMS analysis resulted in comparable rates (slightly lower), and comparable variability between replicates, to the isotope pairing technique. The N₂:Ar technique determines the net N₂ production as the difference between N₂ production by denitrification and N₂ consumption by N-fixation, while N-fixation has little effect on the isotope pairing technique which determines a rate very close to the gross N₂ production. When the two different techniques were applied on the same sediment, the small difference in rates obtained by the two methods seemed to reflect N-fixation as also supported from measurements of ethylene production in acetylene enriched sediment cores. The N₂:Ar and isotope pairing techniques may be combined to provide simultaneous measurements of denitrification and N-fixation. Both techniques have several assumptions that must be met to achieve accurate rates; a number of tests are outlined that can be applied to demonstrate that these assumptions are being meet.     

基于最小二乘配置的九参数模型在三维坐标转换中的应用

运用传统的布尔莎七参数法进行三维坐标转换时,并未考虑到两坐标系统的公共点坐标误差及三个坐标轴缩放比例不均的问题。引入最小二乘配置法,将公共点误差作为随机信号处理,并增加两个尺度参数解决坐标轴缩放比例不均的问题;推导出基于最小二乘配置的九参数模型及其误差方程,通过实验对比分析表明,该方法可以有效地提高坐标转换精度。     

Amplitudes of long-period PcP and the core-mantle boundary

The amplitudes of the core reflection PcP are sensitive to the wave velocities and densities in the neighborhood of the core-mantle boundary (CMB). We study the amplitude ratio of the long-period phases PcP and P from two South American deep-focus earthquakes with favorable fault-plane solution, depth and magnitude, as recorded by WWNSS and CSN stations in North America.Comparison is made with long-period PcP/P amplitude ratios, derived from theoretical seismograms for a variety of CMB models. Models from previous studies, which were mainly derived from short-period PcP observations and which are characterized by discrete layers above the CMB, are almost all inconsistent with the long-period data. The data also discriminate against low nonzero S velocities below the CMB. Simple first-order-discontinuity models of the CMB, for instance according to the Jeffreys-Bullen earth model or according to recent models based mainly on free oscillations, explain the data reasonably well.Model improvements are attempted by varying the P-velocity gradient above the CMB. The best amplitude fit is obtained for a rather strong decrease in P velocity with depth in this zone which, however, gives no acceptable traveltime fit for PcP. The scatter in body-wave amplitudes is considerable even for long-period waves and may prevent the correct assessment of that part of the amplitude variation of a phase with distance that is due to the variation of velocities and densities with depth alone.     

Phytoplankton, nutrients, and transparency in Danish coastal waters

We present a comparative analysis of 1400 data series of water chemistry (particularly nitrogen and phosphorus concentrations), phytoplankton biomass as chlorophylla (chla) concentrations, concentrations of suspended matter and Secchi depth transparency collected from the mid-1980s to the mid-1990s from 162 stations in 27 Danish fjords and coastal waters. The results demonstrate that Danish coastal waters were heavily eutrophied and had high particle concentrations and turbid waters. Median values were 5.1 μg chla 1⁻¹, 10.0 mg DW 1⁻¹ of suspended particles, and Secchi depth of 3.6 m. Chlorophyll concentration was strongly linked to the total-nitrogen concentration. The strength of this relationship increased from spring to summer as the concentration of total nitrogen declined. During summer, total nitrogen concentrations accounted for about 60% of the variability in chlorophyll concentrations among the different coastal systems. The relationship between chlorophyll and total phosphorus was more consistant over the year and correlations were much weaker than encountered for total nitrogen. Secchi depth could be predicted with good precision from measurements of chlorophyll and suspended matter. In a multiple stepwise regression model with In-transformed values the two variables accounted for most of the variability in water transparency for the different seasons and the period March–October as a whole (c. 80%). We were able to demonstrate a significant relationship between total nitrogen and Secchi depth, with important implications for management purposes.     

II型超新星瞬发爆炸模型的对流不稳定性

本文研究ＩＩ型超新星瞬发爆炸模型中的铁星核在坍缩、反弹和激波传播过程中的对流不稳定性．发现在铁星核内区出现中子指状对流,外区出现Ｓｃｈｗａｒｚｓｃｈｉｌｄ对流,而在声速点和中微子俘陷球之间的过渡区出现Ｌｅｄｏｕｘ对流．在０．７４－０．９１Ｍ间的区域是对流不稳定的活跃区域．