Intergrain contact density indices for granular mixes——Ⅱ: Liquefaction resistance

Whether the presence of non-plastic silt in a granular mix soil impact its liquefaction potential and how to evaluate liquefaction resistance of sand containing different amounts of silt contents are both controversial issues. This paper presents the results of an experimental evaluation to address these issues. Two parameters, namely, equivalent intergranular void ratio (ec)eq and equivalent interfine void ratio (ef)eq, proposed in a companion paper (Thevanayagam, 2007) as indices of active grain contacts in a granular mix, are used to characterize liquefaction resistance of sands and silty sands. Results indicate that, at the same global void ratio (e), liquefaction resistance of silty sand decreases with an increase in fines content (CF) up to a threshold value (CFth). This is due to a reduction in intergrain contact density between the coarse grains. Beyond CFth, with further addition of fines, the interfine contacts become significant while the inter-coarse grain contacts diminish and coarse grains become dispersed. At the same e, the liquefaction resistance increases and the soil becomes stronger with a further increase in silt content. Beyond a limiting fines content (CFL), the liquefaction resistance is controlled by interfine contacts only. When CFCFth, at the same (ef)eq, the cyclic strength of a sandy silt is comparable to the host silt at a void ratio equal to (ef)eq.     

岩石孔隙结构的地震信号特征

岩石孔隙结构是控制砂岩和碳酸盐岩的地震波速度和渗透率的重要参数之一。如果两种类似的岩石其孔隙度一定,而渗透率不同,那么它们的声波速度相差2km/s,而渗透率两者则可能相差近6个数量级,即从0.01mD到20mO。在本文中我们总结了由一个广义孔隙弹性理论简化的一个双参数弹性速度模型，以描述孔隙结构对弹性波的影响。由于矿物和储层的流体是给定的,我们用孔隙度和骨架的柔性(挠性)因子来确定速度模型,这个模型可以用于地震反演和储层表征,已改善孔隙度和储量的计算骨架柔性因子可用于岩石结构(PST)类型的定量分类,并可以利用叠前、叠后的两种地震资料将其与孔隙的连通性和渗透率联系起来。本项研究同时也有助于说明为什么振幅与偏移距(AVO)分析用于流体检测在某些情况下失败。这是由于孔隙结构对地震波的影响能够掩盖所有流体效应，特别是在碳酸岩中。     

Intergrain contact density indices for granular mixes——Ⅰ: Framework

Mechanical behavior such as stress-strain response, shear strength, resistance to liquefaction, modulus, and shear wave velocity of granular mixes containing coarse and fine grains is dependent on intergrain contact density of the soil. The global void ratio e is a poor index of contact density for such soils. The contact density depends on void ratio, fine grain content (CF), size disparity between particles, and gradation among other factors. A simple analysis of a two-sized particle system with large size disparity is used to develop an understanding of the effects of CF , e, and gradation of coarse and fine grained soils in the soil mix on intergrain contact density. An equivalent intergranular void ratio (ec)eq is introduced as a useful intergrain contact density for soils at fines content of less than a threshold value CFth. Beyond this value, an equivalent interfine void ratio (ef)eq is introduced as a primary intergrain contact density index. At higher values of CF beyond a limiting value of fine grains content CFL, an interfine void ratio ef is introduced as the primary contact density index. Relevant equivalent relative density indices (Drc)eq and (Drf)eq are also presented. Experimental data show that these new indices correlate well with steady state strength, liquefaction resistance, and shear wave velocities of sands, silty sands, sandy silts, and gravelly sand mixes.     

地球南北半球的非对称性

依据新的计算分析和空间观测数据,进一步论述了地球南北半球的非对称性. 全球热散失量的计算得出,南半球高出北半球33髎;南半球地幔热散失量是北半球的2倍. 比较南北半球S波速度分布,得出南半球的上地幔为低速、高温,北半球的上地幔为高速、低温. 计算地幔各层的质心位置发现,地球的质心偏于北半球. 计算地球经、纬圈长度的年变化率表明,南半球在扩张,北半球在收缩. 用空间大地测量数据的检测结果证实,南半球处于扩张状态,北半球处于压缩状态. 对地球的非对称性作了初步的动力学解释.     

Nonlinear Capillary-Gravity Waves Produced by a Vertically Oscillating Plate

The nonlinear capillary-gravity wave produced by a vertically oscillating plate,in which thecontact-angle model is considered,is studied by use of the Boundary Integral Equation Method(BIEM).The present numerical experiment shows that the code is robust and efficient for modeling the generationand propagation of capillary-gravity waves.It is found that the wave heights of stationary periodicnonlinear waves radiated away from the plate are dependent on the parameters involved in the contact-an-gle model.The effect of the contact-angle hysteresis and the nonlinearity of capillary-gravity waves on thewave profile is discussed in the paper.