利用COSMIC数据构建全球电离层TEC地图

电离层延迟效应是GNSS精密导航的主要误差源之一,通过建立电离层模型可不同程度地消除电离层延迟效应的影响.然而,目前海洋和气候条件极其恶劣的地区地面参考站建立困难,导致电离层观测资料的全球分布很不均匀,从而限制了现有电离层模型的精度,影响了延迟改正的效果.本文提出在日固坐标系(sun-fixed,地磁纬度和地方时)下,...     

利用机载GNSS反射信号反演海面风速的研究

全球卫星导航定位系统的反射信号(GNSS-R)遥感技术作为一种新型的、低成本的、高机动性的海面微波遥感测风技术,与其他测风手段优势互补,可以增加测风手段的多样性,弥补局部测风手段不足的状况。研究了接收机在机载高度时,GPS反射信号功率理论模型四部分函数的性质,在此基础之上,数值模拟了机载高度下理论相关功率波形,基于海面风速对波形峰值与后沿的影响,提出了一种能够兼顾所有理论波形信息的二维插值风速反演方法。利用该方法,结合实测机载数据对海面风速进行反演,反演的风速均值与附近测站风速均值相差为1.4 m/s,与浮标数据相一致。     

中国大陆水平地壳运动的数学模型

在获得中国区域1000个实测GPS台站速度场的基础上,利用多面函数法、滑动欧拉矢量法和滑动弹塑性模型法建立了中国大陆水平地壳运动模型,统计表明3种方法外部符合精度2～4mm/a,模型互差精度约为3mm/a。     

卫星资料统计全球飞机积冰潜势分布特征

利用云探测卫星CloudSat在2007年12月1日—2008年11月30日全年数据, 构建一种利用CloudSat云分类产品、温度产品、液态水含量产品来联合识别飞机积冰潜势的算法, 并利用该算法对上述时段的全球范围内飞机积冰潜势的出现频率进行统计分析, 旨在为航空安全特别是长途飞行提供一定参考依据。并分析了不同云类型和不同季节的飞机积冰潜势分布特征。结果表明:飞机积冰潜势在全球范围内存在纬向、海陆及季节差异特征。整体上中高纬度地区积冰潜势频率比低纬度地区高, 陆地上空的积冰潜势频率比海洋上空高; 对于不同云类型而言, 中高纬度地区积冰潜势以层云、层积云、高层云和高积云为主, 而低纬度地区积冰潜势以深对流云为主; 对于不同季节而言, 夏季积冰频率较低, 冬春季节频率较高。      

渤海GNSS-R机载测风试验及其反演结果

对渤海GNSS-R机载试验进行了海面风场反演.结果表明,风速精度优于1 m/s,风向精度优于20°.     

分形随机漫步噪声及相关函数

讨论了在地学、工程测量研究领域常见的随机漫步噪声,从理论上将经典布朗运动随机过程(随机漫步噪声)推广到分形布朗运动随机过程,并导出分形布朗运动随机过程的相关函数。     

全球GNSS掩星计划进展

主要介绍了国际上GNSS掩星计划（包括GPS／MET、Orsted、Sunsat、SAC-C、CHAMP、GRACE、FedSat、COSMIC、METOP和ACE＋计划）发展现状、科学任务及系统组成、取得的进展以及未来的发展趋势。通过总结指出,自GPS／MET计划实施后,掩星探测技术逐步完善并向业务化运用迈出了一大步;今后GNSS掩星探测将向多星探测和混合探测方向发展,国际化合作成为项目的开发和研制趋势     

Analysis on the noises from continuously monitoring GPS sites

In this paper,we analyze the time series of site coordinates of 27 continuously monitoring GPS sites covered bythe Crustal Movement Observation Network of China over the whole country.The data are obtained in the periodfrom the beginning of the observation to the November of 2005.On the basis of data processing,we analyze thepower spectrum density of coordinate component noise at each site and calculate the spectral indexes manifestingthe noise property of each component.The spectral indexes indicate that for most sites,the noise of time series ofeach coordinate component can be addressed by the model of white noise flicker noise;and for a small amountof sites,it can be described by the model of white noise flicker noise random walk noise.We also quantita-tively estimate each noise component in the model by using the criterion of maximum likelihood estimation.Theresult shows that the white noise in the time series of GPS site coordinates does not constitute the main part ofnoise.Therefore,the error estimation of site movement parameters is usually too small,or too optimistic if weconsider the white noise only.Correspondingly,if this factor is not fully considered in explaining these movementparameters,it might mislead the readers.     

NNR constraint in ITRF2000 and the new global plate motion model NNR-ITRF2000VEL

There are 54 sites employed by ITRF2000 for ITRF2000 orientation. The deficiencies are obvious. First, these sites cannot well represent the rotation rate of the earth crust because there is no selected site in five out of fourteen tectonic plates and three of fourteen plates only have one site each. Second, the total angular momentum of the crust is non-vanishing in ITRF2000, even though it is declared that No Net Rotation (NNR) with respect to NNR-NUVEL1A is imposed on ITRF2000 construction according to the documentations of ITRF2000. So the NNR condition in conventional terrestrial reference system (CTRS) realization cannot be satisfied in ITRF2000. In this paper, the criteria of site selection for estimating the Euler vectors are suggested; the Tisserand system constraint equation in ITRF construction is derived; and as a product, the global plate motions can be obtained from the ITRF2000 construction.     

Movement and strain conditions of active blocks in the Chinese mainland

The definition of active block is given from the angles of crustal deformation and strain. The movement and strain parameters of active blocks are estimated according to the unified velocity field composed of the velocities at 1598 GPS stations obtained from GPS measurements carried out in the past years in the Chinese mainland and the surrounding areas. The movement and strain conditions of the blocks are analyzed. The active blocks in the Chinese mainland have a consistent E-trending movement component, but its N and S components are not consistent. The blocks in the western part have a consistent N-trending movement and the blocks in the eastern part have a consistent S-trending movement. In the area to the east of 90°E, that is the area from Himalayas block towards NE, the movement direction of the blocks rotates clockwisely and the movement rates of the blocks are different. Generally, the movement rate is large in the west and south and small in the east and north with a difference of 3 to 4 times between the rates in the west and east. The distributions of principal compressive strain directions of the blocks are also different. The principal strain of the blocks located to the west of 90oE is basically in the SN direction, the principal compressive strain of the blocks in the northeastern part of Qingzang plateau is roughly in the NE direction and the direction of principal compressive strain of the blocks in the southeastern part of Qingzang plateau rounds clockwisely the east end of Himalayas structure. In addition, the principal strain and shear strain rates of the blocks are also different. The Himalayas and Tianshan blocks have the largest principal compressive strain and the maximum shear strain rate. Then, Lhasa, Qiangtang, Southwest Yunnan (SW Yunnan), Qilian and Sichuan-Yunan (Chuan-Dian) blocks followed. The strain rate of the blocks in the eastern part is smaller. The estimation based on the stain condition indicates that Himalayas block is still the area with the most intensive tectonic activity and it shortens in the NS direction at the rate of 15.2±1.5 mm/a. Tianshan block ranks the second and it shortens in the NS direction at the rate of 10.1±0.9 mm/a. At present, the two blocks are still uprising. It can be seen from superficial strain that the Chinese mainland is predominated by superficial expansion. Almost the total area in the eastern part of the Chinese mainland is expanded, while in the western part, the superficial compression and expansion are alternatively distributed from the south to the north. In the Chinese mainland, most EW-trending or proximate EW-trending faults have the left-lateral or left-lateral strike-slip relative movements along both sides, and most NS-trending faults have the right-lateral or right-lateral strike-slip relative movements along both sides. According to the data from GPS measurements the left-lateral strike-slip rate is 4.8±1.3 mm/a in the central part of Altun fault and 9.8±2.2 mm/a on Xianshuihe fault. The movement of the fault along the block boundary has provided the condition for block movement, so the movements of the block and its boundary are consistent, but the movement levels of the blocks are different. The statistic results indicate that the relative movement between most blocks is quite significant, which proves that active blocks exist. Himalayas, Tianshan, Qiangtang and SW Yunnan blocks have the most intensive movement; China-Mongolia, China-Korea (China-Korea), Alxa and South China blocks are rather stable. The mutual action of India, Pacific and Philippine Sea plates versus Eurasia plate is the principal driving force to the block movement in the Chinese mainland. Under the NNE-trending intensive press from India plate, the crustal matter of Qingzang plateau moves to the NNE and NE directions, then is hindered by the blocks located in the northern, northeastern and eastern parts. The crustal matter moves towards the Indian Ocean by the southeastern part of the plateau.