Geothermal palaeogradients and metamorphic zonation from the conodont colour alteration index (CAI)

The conodont colour alteration index (CAI) is potentially valuable in thermal history investigations, but there are problems in its use. An approach is proposed herein to overcome the problem of establishing reliable geothermal palaeogradients in areas with burial metamorphism, based on knowledge of the stratigraphic succession thickness, the boundaries of chronostratigraphic units, and the age and duration of deformation episodes. Although also problematical that a correlation between CAI and Kübler index (KI) values does not exist, there are areas where CAI and KI values are notably consistent for the anchizone boundaries; however, anomalous correlations between CAI and KI values have also been found in some areas. A CAI anchizone (or ancaizone) is defined in order to enable CAI values to be used independently to establish a metamorphic zonation.     

Lead isotope systematics of Late Cretaceous – Tertiary Andean arc magmas and associated ores between 8°N and 40°S: evidence for latitudinal mantle heterogeneity beneath the Andes

ABSTRACT Lead isotope variability of magmatic arc rocks and associated mineralization of the Central Andes is usually considered to be the result of mixing between a homogeneous mantle and heterogeneous continental crust. About 230 new lead isotope data on the Northern and Central Andes allow us to compare for the first time lead isotope systematics of the Late Cretaceous – Tertiary arc magmatism and associated mineralization along the Andean chain between 8°N and 40°S. Lead isotope compositions indicate mixing between mantle and upper crustal rocks along the whole Andean chain. Additionally, we have found that mantle end-members of the Late Cretaceous – Tertiary magmatism are heterogeneous and systematically shifted towards less radiogenic ²⁰⁶Pb/²⁰⁴Pb compositions from north to south along the Andes. This heterogeneity most likely results from mixing between a low radiogenic mantle, possibly carrying a DMM or EM I component, and a more radiogenic mantle, possibly carrying an HIMU component. Thus, our results imply that lead isotope variability of Andean magmas at the continental scale is caused not only by crustal but also by mantle heterogeneity.     

Thermodynamic controls on element partitioning between titanomagnetite and andesitic–dacitic silicate melts

Titanomagnetite–melt partitioning of Mg, Mn, Al, Ti, Sc, V, Co, Ni, Cu, Zn, Ga, Zr, Nb, Mo, Hf and Ta was investigated experimentally as a function of oxygen fugacity (fO₂) and temperature (T) in an andesitic–dacitic bulk-chemical compositional range. In these bulk systems, at constant T, there are strong increases in the titanomagnetite–melt partitioning of the divalent cations (Mg²⁺, Mn²⁺, Co²⁺, Ni²⁺, Zn²⁺) and Cu²⁺/Cu⁺ with increasing fO₂ between 0.2 and 3.7 log units above the fayalite–magnetite–quartz buffer. This is attributed to a coupling between magnetite crystallisation and melt composition. Although melt structure has been invoked to explain the patterns of mineral–melt partitioning of divalent cations, a more rigorous justification of magnetite–melt partitioning can be derived from thermodynamic principles, which accounts for much of the supposed influence ascribed to melt structure. The presence of magnetite-rich spinel in equilibrium with melt over a range of fO₂ implies a reciprocal relationship between a(Fe²⁺O) and a(Fe³⁺O_1.5) in the melt. We show that this relationship accounts for the observed dependence of titanomagnetite–melt partitioning of divalent cations with fO₂ in magnetite-rich spinel. As a result of this, titanomagnetite–melt partitioning of divalent cations is indirectly sensitive to changes in fO₂ in silicic, but less so in mafic bulk systems.     

Objectives of fisheries management: case studies from the UK, France, Spain and Denmark

The main objectives of fisheries management are generally similar throughout the world. These are often stated in policy documents such as the Common Fisheries Policy and the Magnuson–Stevens Fishery Conservation and Management Act. However, at the local level often the key objectives of management are more detailed, characterised by both the overriding management structure and the status and type of fishery concerned. In this paper, we consider case study fisheries from the UK, France, Spain and Denmark to compare some of the various types of fisheries and fisheries management systems that exist in the European Union. From this, we define the key objectives for each management system.     

A new scheme for numerical modelling of flow and transport processes in 3D fractured porous media

The objective of this work is to develop a new numerical approach for the three-dimensional modelling of flow and transient solute transport in fractured porous media which would provide an accurate and efficient treatment of 3D complex geometries and inhomogeneities. For this reason, and in order to eliminate as much as possible the number of degrees of freedom, the fracture network, fractures and their intersections, are solved with a coupled 2D–1D model while the porous matrix is solved independently with a 3D model. The interaction between both models is accounted for by a coupling iterative technique. In this way it is possible to improve efficiency and reduce CPU usage by avoiding 3D mesh refinements of the fractures. The approach is based on the discrete-fracture model in which the exact geometry and location of each fracture in the network must be provided as an input. The formulation is based on a multidimensional coupling of the boundary element method-multidomain (BEM-MD) scheme for the flow and boundary element dual reciprocity method-multidomain (BE-DRM-MD) scheme for the transport. Accurate results and high efficiency have been obtained and are reported in this paper.     

Study of a rockfall in a limy conglomerate canyon (Covarrubias, Burgos, N. Spain)

In this paper, a rockfall of some tenths of cubic metres of rock, occurred in a conglomerate canyon in the northern Castilian plateau (N-Central Spain), is described in detail. This includes the basic data (geology, mapping, meteorological data and rock involved), the mechanical mechanism of the instability, the propagation and reach of the fallen rock boulders and the final location of the pieces. The study is based on detailed geological, aerial photography and geotechnical studies and advance topographical measurements. Geological engineering techniques are used to analyze the instability initiation and rockfall propagation. This study contributes to a better understanding of the geological processes leading to the occurrence of calcareous canyons and cliffs in the drainage network of the upper Castilian plateau. It is also helpful to improve our knowledge on natural rockfall phenomena for risk engineering purposes aiming to quantify, control and mitigate associated hazards.     

Geochemical processes in a Mediterranean Lake: a high-resolution study of the last 4,000 years in Zoñar Lake,southern Spain

High-resolution geochemical analysis of a 6-m-long sediment core from Zoñar Lake, southern Spain, provides a detailed characterization of major changes in lake and watershed processes during the last 4,000 years. Geochemical variables were used as paleolimnological indicators and complement Zoñar Lakes’s paleoenvironmental reconstruction based on sedimentological and biological proxies, which define periods of increasing allochthonous input to the lake and periods of dominant autochthonous sedimentation. Chemical ratios identify periods of endogenic carbonate formation (higher Ca/Al, Sr/Al and Ba/Al ratios), evaporite precipitation (higher S/Al, Sr/Al ratios), and anoxic conditions (higher Mo/Al, U/Th ratios and Eu anomaly). Higher productivity is marked by elevated organic carbon content and carbonate precipitation (Mg/Ca). Hydrological reconstruction for Zoñar Lake was based on sedimentological, mineralogical and biological proxies, and shows that lower lake levels are characterized by Sr-rich sediments (a brackish lake with aragonite) and S-rich sediments (a saline lake with gypsum), while higher lake levels are characterized by sediments enriched in elements associated with alumino-silicates (Al, K, Ti, Fe, trace and rare earth elements), reflecting fresher conditions. Geochemical indicators also mark periods of higher detrital input to the lake related to human activity in the watershed: (1) during the Iberian Roman Humid Period (650 BC–AD 300), around the onset of the Little Ice Age (AD 1400), during the relatively drier Post-Roman and Middle Ages (AD 800–1400), and over the last 50 years, due to mechanized farming practices. Heavy metal enrichment in the sediments (Cu and Ni) suggests intensification of human activities during the Iberian Roman Period, and the use of fertilizers during the last 50 years.     

Geophysical methods applied to fault characterization and earthquake potential assessment in the Lower Tagus Valley, Portugal

The study region is located in the Lower Tagus Valley, central Portugal, and includes a large portion of the densely populated area of Lisbon. It is characterized by a moderate seismicity with a diffuse pattern, with historical earthquakes causing many casualties, serious damage and economic losses. Occurrence of earthquakes in the area indicates the presence of seismogenic structures at depth that are deficiently known due to a thick Cenozoic sedimentary cover. The hidden character of many of the faults in the Lower Tagus Valley requires the use of indirect methodologies for their study. This paper focuses on the application of high-resolution seismic reflection method for the detection of near-surface faulting on two major tectonic structures that are hidden under the recent alluvial cover of the Tagus Valley, and that have been recognized on deep oil-industry seismic reflection profiles and/or inferred from the surface geology. These are a WNW–ESE-trending fault zone located within the Lower Tagus Cenozoic basin, across the Tagus River estuary (Porto Alto fault), and a NNE–SSW-trending reverse fault zone that borders the Cenozoic Basin at the W (Vila Franca de Xira–Lisbon fault). Vertical electrical soundings were also acquired over the seismic profiles and the refraction interpretation of the reflection data was carried out. According to the interpretation of the collected data, a complex fault pattern disrupts the near surface (first 400 m) at Porto Alto, affecting the Upper Neogene and (at least for one fault) the Quaternary, with a normal offset component. The consistency with the previous oil-industry profiles interpretation supports the location and geometry of this fault zone. Concerning the second structure, two major faults were detected north of Vila Franca de Xira, supporting the extension of the Vila Franca de Xira–Lisbon fault zone northwards. One of these faults presents a reverse geometry apparently displacing Holocene alluvium. Vertical offsets of the Holocene sediments detected in the studied geophysical data of Porto Alto and Vila Franca de Xira–Lisbon faults imply minimum slip rates of 0.15–0.30 mm/year, three times larger than previously inferred for active faults in the Lower Tagus Valley and maximum estimates of average return periods of 2000–5000 years for M 6.5–7 co-seismic ruptures.