河南嵩县松里沟金矿床中碲化物的发现及其地质意义

松里沟金矿位于华北陆块南缘熊耳山地区,已探明金资源储量26 t。矿体产于中新太古界-古元古界太华群片麻岩NWW向的断裂带中。其热液成矿过程包括4个成矿阶段:黄铁矿-石英阶段、石英-黄铁矿阶段、金-碲化物阶段和石英-碳酸盐阶段。显微镜下发现金-碲化物阶段存在大量与金共生的碲化物。利用电子探针和能谱分析查明碲化物的种类、共生关系和形成条件,确认的碲化物有碲铅铋矿、碲铅矿、碲铋矿、碲金矿、碲金银矿、硫碲铋铅金矿、辉碲铋矿,此外还有大量的自然金和少量的辉铋矿。该矿床为一与岩浆作用有关的碲金矿床。Au主要以自然金和金银碲化物的形式存在。Au、Ag以硫氢络合物的形式发生迁移,Te2(g)和H2Te(g)冷凝进入含贵金属的氯化物溶液是碲化物沉淀主要机制。相图及化学反应方程式分析表明,金-碲化物阶段受温度、碲逸度、硫逸度、氧逸度和酸碱度控制,其中,黄铁矿-石英阶段和石英-黄铁矿阶段形成于logf_(Te2)-14.4和logf_(S2)=-11.1~-6.5的环境。金-碲化物阶段形成于温度为110~313℃、logf_(Te2)=-15.2~-9.4和logf_(S2)=-16.5~-14.6、f_(O_2)升高和pH值降低的环境。碲化物的发现为探讨该矿床成因和熊耳山地区寻找同类型的矿床提供了依据。     

华北北缘东段开原地区三叠纪侵入岩年代学及岩石地球化学研究

本文报道了位于华北北缘东段开原地区尖山子岩体、宝兴岩体和树德屯岩体的岩相学、岩石地球化学及年代学特征,探讨了上述岩体的形成时代、岩石成因及其构造环境。锆石U-Pb定年结果表明,尖山子岩体形成于251±1.3Ma,宝兴岩体形成于235±1.3Ma,树德屯岩体形成于224±1.9Ma,说明开原地区三叠纪存在早三叠世、中三叠世和晚三叠世三个时期的岩浆活动。尖山子岩体以二长花岗岩为主,具高硅低镁特征,属钙碱性系列;富集大离子亲石元素Rb、K、Ba、Th,相对亏损Ta、Nb、P、Hf、Zr等高强场元素;δEu=0.55~1.87,(La/Yb)N=6.23~47.9,轻重稀土分馏明显,富集轻稀土,亏损重稀土。宝兴岩体以花岗闪长岩为主,Si O2含量变化较大(52.36%~74.06%),Al2O3含量(14.5%~17.34%),Mg O含量(0.61%~3.66%),属钙碱性系列;富集大离子亲石元素Rb、K、Ba、Th,相对亏损Ta、Nb、P、Ti等高强场元素;无明显的Eu异常,(La/Yb)N=6.81~25.6,轻重稀土分馏较明显,富集轻稀土,亏损重稀土。树德屯岩体以闪长岩为主,岩石具有低硅高镁特征,K2O/Na2O比值为0.33~0.76,显示富K贫Na特征,属钙碱性系列;富集大离子亲石元素Rb、K、Ba、Th,相对亏损Ta、Nb、P、Ti、Hf、Zr等高强场元素;无明显的Eu异常,(La/Yb)N=3.87~10.2,轻重稀土分馏不明显。上述岩石地球化学特征表明,尖山子岩体和宝兴岩体的原始岩浆起源于下地壳基性物质的部分熔融,树德屯岩体的原始岩浆起源于亏损的地幔楔。研究区三叠纪岩浆岩形成于造山阶段挤压环境下。华北北缘东段的挤压碰撞作用一直持续到晚三叠世(224Ma),而造山阶段向造山后阶段的构造转换(挤压地壳加厚向伸展垮塌的环境转换)发生于晚三叠世-早侏罗世(224~180Ma)期间。华北北缘东段中生代岩石圈减薄或破坏始于晚三叠世-早侏罗世(224~180Ma)期间。     

Reconstruction of Holocene paleohydrological and sedimentological characteristics of Umm Ar-Rimam basin (northern Kuwait)

The paleohydrological and sedimentological characteristics of a playa lake in northern Kuwait (Arabian Gulf) are reconstructed using sedimentological, geochemical, and isotopic techniques. The sequence consists of up to 8 cycles of S-poor, alluvial sediments capped by a thin organic soil interbedded with gravity-fall calcrete sediments. The succession is locally derived from mainly Quaternary sediments and is regressive with upsection filling of the subsiding basin by cycles of sheetwash flow in response to climatic change. There is no natural, open-water lake water as indicated by low total organic carbon (TOC) data, but the presence of incised calcrete yardangs suggests that more extensive open-water conditions were operative in the past. Stable isotope (δ¹⁸O‰ and δ¹³C‰) values of the authigenic carbonates indicate the following three distinct processes: evaporation, meteoric fluid infiltration, and rapid per-descensum flow (rapid downward movement of water and playa sediment through pipes) through a porous, clastic sequence. Because evaporites are scarce, other factors besides evaporation action control chemical and isotopic compositions of the per-decensum lake fluids. Consequently, the isotopic composition cannot be interpreted exclusively as an indicator of salinity or evaporation ratio. The degassing of CO₂ during groundwater discharge may explain the enriched carbon isotope values for the authigenic carbonates precipitated in the sediments. Hydrologically closed lake water bodies tend to show low negative carbonate oxygen and carbon isotopic signatures. Isotopically negative δ¹³C values imply a strong input of soil-zone carbon to the groundwater of the top 60 cm of the sediment. Lakes that are hydrologically closed and evaporate or equilibrate with atmospheric CO₂ will tend to have low negative δ¹⁸O and δ¹³C values in the carbonates as reported by Talbot (Chem Geol: Isotope Geosci Sect 80(4):261–279, 1990). Biologically active lakes will tend toward lower δ¹³C of dissolved carbon due to the photosynthetic effects of ¹²C withdrawal as reported by Dunagan and Driese (J Sed Res 69:772–783, 1999). Increased biological activity during sedimentation may account for low carbon isotope values where plants were abundant, but in shrinkage-dominated systems (those of clay-rich soil subjecting to wet-dry conditions), carbon isotopes will be largely inherited from the calcretic limestones in the land extending landward of the coast and not influenced by coastal processes (known as hinterland), such as Umm Ar-Rimam depression. This basin does not fit the classic shallow playa-type basins of the Arabian Peninsula but rather the recharge playas of the southwestern USA.     

Tectono-sedimentary evolution of the Miocene Oued Dayr Formation (Ghomaride Complex,Internal Domain of the Maghrebian Rif Belt,Morocco)

This work deals with sedimentological, petrographic, and structural analyses of a middle Miocene late-orogenic sedimentary cycle, denoted Oued Dayr Formation, recognized in the Rifian sector of the Maghrebian Chain (Morocco). The analyzed Formation (75 m thick) starts with 15–20 m of light colored polymict conglomerates, with minor sandstone beds, lying on the Paleozoic basement and Mesozoic cover of the Ghomaride Nappe. Facies analysis indicates a fining-upward deposition in a marine environment characterized by increasing deepening, reflecting a subsidence rate that exceeds sedimentary supply. Petrographic analysis points out that sandstones are represented by litharenites originated by erosion of recycled orogen. The conglomerates pebbles and cobbles consist of Alpine low- to high-grade metamorphic rocks as metarenites, phyllites, mylonitic quartzites, micaschists, augen gneisses deriving from the exhumed deep metamorphic basement, the overlying metasedimentary of the Sebtide Nappes and of sedimentary rocks as sandstones, jaspes, limestones, and shales deriving from the Ghomaride Nappes and their sedimentary cover. Data reveal mixed provenance indicating that the Oued Dayr Formation was fed by the Internal Nappes stack of the Maghrebian Chain. Structural analysis shows that the Oued Dayr Formation accumulated in a Thrust-Top basin, during an early extension (D₀ phase), recorded by synsedimentary normal faults within middle Langhian deposits on the rear of the Internal Nappes stack. Subsequent ductile and brittle compressional (D₁, D₂, D₃) and extensional (D₄) deformation phases occurred during and/or after the stacking, exhumation, and early unroofing of Sebtide Complex coeval with the opening of the western Mediterranean back-arc basins since middle Miocene time.     

Sensitivity analysis for the GALDIT method based on the assessment of vulnerability to pollution in the northern Sfax coastal aquifer,Tunisia

Coastal aquifer of northern Sfax (Tunisia) suffers from the high risk to seawater intrusion and the water quality degradation due to the overexploitation. Hence, assessing the study area vulnerability to pollution is highly crucial so as to protect the groundwater resources. The assessment has been performed by applying the GALDIT method using Geographic Information System (GIS) software and multi-criteria evaluation techniques, and the sensitivity analysis approach to evaluate the effect of each GALDIT parameter on the vulnerability assessment. The GALDIT vulnerability map classifies the study area into three vulnerability classes: low vulnerability (30–50), moderate vulnerability (50–70), and high vulnerability (70–90), which represent 5, 30, and 65 % of the study area, respectively. The map illustrates that the coastal zones of the aquifer are the most threatened areas. The sensitivity analysis results show that the aquifer hydraulic conductivity (A) and the thickness of the aquifer (T) represent the determining factors in the modified vulnerability model. The real weight was used to elaborate the modified GALDIT model which was correlated with resistivity values for validation. This study could serve as a scientific basis for sustainable land planning and groundwater management in the study area.     

<Emphasis>H</Emphasis>ydrological variability of the <Emphasis>S</Emphasis>oummam watershed <Emphasis>(N</Emphasis>ortheastern <Emphasis>A</Emphasis>lgeria<Emphasis>)</Emphasis> and the possible links to climate fluctuations

The long-term variability of rainfall in the Soummam watershed (NE Algeria) has been analysed over the past 108 years using continuous wavelet method in order to identify the interannual modes controlling the rainfall variability. Statistical analyses of rainfall timeseries have shown its distribution following five periods of time, limited by a series of discontinuities around 1935, 1950, 1970 and 1990. The continuous wavelet transform have demonstrated different low frequency modes: 2–4, 4–8, 8–16 and 16–32 years.The annual band is expanded during the full study period with some pics around 1905, 1920–1935 and 1960; it shows a negative long-term trend, in particular since the period 1970–1990 when a major change has been identified. Then, the relationships between climate patterns of North Atlantic Oscillation (NAO) and Southern Oscillation Index (SOI) and the hydrological variability in the frequency domain have been investigated; they have shown a mean explained variance of 40 and 24 %, respectively. Such variances are less obvious for the annual mode and increase for the interannual frequencies. The coherence suffer from high perturbations since the period 1970–1990 when the NAO (SOI) shifts from negative (positive) phases to positive (negative) ones. Such anomalies are responsible for significant changes of rainfall variability, emphasising the global warming effects.     

Investigation of moment-rotation relation in different joint types and evaluation of their effects on segmental tunnel lining

This paper presents the results of a numerical study that has been performed to investigate the different joint types that affect the moment-rotation relation and ultimate bending moment capacity of a joint. A 3D finite element method was adapted to establish elaborate numerical models of segments. To evaluate the possible differences in moment-rotation behavior between different joint types, 10 different joint types were simulated. Additionally, the effect of different joint types on behavior of a lining ring was investigated. The validity of the peridynamic simulation was tested by comparing results obtained in this paper against the results obtained in a study performed by Hordijk and Gijsbers. Observations of the results demonstrate that in a flat joint, the expanding of joint height increased the rotation stiffness of the joint in the linear branch, and accordingly, the ultimate bending moment of the joint increased. In the ring model, it was observed that the expanding of joint height led to the decreased of ring displacement and stress concentration in the joint. Whenever there were full surface contacts (contact two segment in total cross section) in the joints, the rotation stiffness of the joints in the linear branch became equal, and, as a result, the displacement in the ring model was the same in all joint types. In addition, it was observed that using a convex joint in the ring model increases the displacement of the ring. The ultimate bending moment of bolted joints was higher than that of joints without bolts, especially in the case of a negative moment.     

Characterization of the Tertiary reservoir in Khabbaz Oil Field,Kirkuk area,Northern Iraq

Tertiary reservoir represented by Jeribe, Anah, Azkand, and Azkand/Ibrahim formations has been studied from reservoir characterization point of view in Khabbaz Oil Field/Northern Iraq. Examined thin sections prepared from core rock samples which are selected from the wells Kz-8 and Kz-9 revealed the existence of different microfacies in which are varies types of porosity such as interparticle, intraparticle, moldic, vuggy, and fractures have been noticed. In addition to these different types of diagenetic features are represented mainly by cementation, dolomitization, recrystallization, and dissolution. The available log data for the wells Kz-11, Kz-14, and Kz-16 have been used in characterizing the reservoir properties of the studied formations. The detected lithologies from porosity logs showed domination of limestone, dolomitic limestone, and dolomites in addition to few thin beds of anhydrites in Jeribe Formation and thin beds of sand dominated lithologies in Azkand Formation. Clay content has been calculated from gamma ray log along the studied sections and appeared to be mostly of dispersed clay type as shown from density-neutron porosity crossplot of Thomas-Stieber. Correction from the effect of clay content has been done for all the measured sonic, density, and neutron porosities. The available porosity and permeability values which are measured from core tests in the well Kz-9 for the formations of Jeribe, Anah, and Azkand have been adapted to formalize the best equation for calculating permeability in the other studied wells which have no core test measurements but only log data (Kz-11, Kz-14, and Kz-16 wells). Depending on porosity, permeability, and shale content, the studied sections have been subdivided into seven reservoir units in the wells Kz-11 and Kz-16, and for eight reservoir units in the well Kz-14.