Parameters of Acoustic Signals Generated by the Atmospheric Meteoroid Explosion over Romania on January 7, 2015

System spectral analysis of temporal variations in the level of acoustic signals recorded at a number of European infrasound stations is carried out. The prevailing periods that varied within 3–5 s are found. Initial kinetic and acoustic energies of the Romanian meteoroid and infrasound parameters are calculated: celerity (280 m/s), acoustic efficiency, and stratospheric wind velocity (about 20 m/s). Parameters of cylindrical and explosive shock waves are found: duration, characteristic size, and amplitude. The dependence of the attenuation of infrasonic waves on distance is estimated. The results of the estimates are in good agreement with the results of the observations.     

On the coplanar eccentric non-restricted co-orbital dynamics

We study the phase space of eccentric coplanar co-orbitals in the non-restricted case. Departing from the quasi-circular case, we describe the evolution of the phase space as the eccentricities increase. We find that over a given value of the eccentricity, around 0.5 for equal mass co-orbitals, important topological changes occur in the phase space. These changes lead to the emergence of new co-orbital configurations and open a continuous path between the previously distinct trojan domains near the \(L_4\) and \(L_5\) eccentric Lagrangian equilibria. These topological changes are shown to be linked with the reconnection of families of quasi-periodic orbits of non-maximal dimension.     

Estimating average shock pressures recorded by impactite samples based on universal stage investigations of planar deformation features in quartz—Sources of error and recommendations

Planar deformation features (PDFs) in quartz are the most widely used indicator of shock metamorphism in terrestrial rocks. They can also be used for estimating average shock pressures that quartz-bearing rocks have been subjected to. Here we report on a number of observations and problems that we have encountered when performing universal stage measurements and crystallographically indexing of PDF orientations in quartz. These include a comparison between manual and automated methods of indexing PDFs, an evaluation of the new stereographic projection template, and observations regarding the PDF statistics related to the c-axis position and rhombohedral plane symmetry. We further discuss the implications that our findings have for shock barometry studies. Our study shows that the currently used stereographic projection template for indexing PDFs in quartz might induce an overestimation of rhombohedral planes with low Miller–Bravais indices. We suggest, based on a comparison of different shock barometry methods, that a unified method of assigning shock pressures to samples based on PDFs in quartz is necessary to allow comparison of data sets. This method needs to take into account not only the average number of PDF sets/grain but also the number of high Miller–Bravais index planes, both of which are important factors according to our study. Finally, we present a suggestion for such a method (which is valid for nonporous quartz-bearing rock types), which consists of assigning quartz grains into types (A–E) based on the PDF orientation pattern, and then calculation of a mean shock pressure for each sample.     

烟台市地质灾害发育现状及影响因素分析

2016年山东省开展各市地质灾害排查工作,烟台市作为地质灾害较发育区,是该次排查重点工作区之一。该文以现状调查为基础,查明了烟台市共发育471处地质灾害隐患点,地质灾害规模以小型为主,主要类型为崩塌、滑坡、泥石流、采空塌陷和岩溶塌陷,其中崩塌隐患点占地质灾害总数的68%,数量最多,其次为泥石流和采空塌陷,各占总数的15%和14%,滑坡数量最少,仅占总数的1%,并介绍了各类地质灾害分布特征。在此基础上,对地质灾害的主要影响因素——地形地貌、岩土体类型、地质构造、降水和人类工程活动等进行了分析。最后提出了在进行工程建设活动的同时重视其引发的地质灾害问题,以减少和预防其带来的次生地质灾害。     

The characteristic pattern of multiple colored layers in coastal stratified lakes in the process of separation from the White Sea

An unusual feature of the saline stratified lakes that were formed due to ongoing postglacial uplift on the White Sea coast is the presence of several differently colored thin layers in the zone with sharp gradients. Colored layers in five lakes at various stages of separation from the sea were investigated using optical microscopy, spectrophotometry, spectrofluorimetry, and photobiology. The upper greenish colored layer located in the aerobic strata of all lakes near the compensation depth of 1% light penetration contains green algae. In the chemocline, another layer, brightly green, red or pink, is dominated by mixotrophic flagellates. Despite the very low light intensities and the presence of H 2 S, active photosynthesis by these algae appears to be occurring, as indicated by high values of the maximum quantum yield of primary photochemistry, electron transport activity, photosynthetic activity of photosystem II, the fraction of active centers, and low values of heat dissipation. In the reduced zone of the chemocline, a dense green or brown suspension of anoxygenic phototrophs(green sulfur bacteria) is located.     

Analysis of the exoplanet containing system Kepler-13

We have applied the close binary system analysis program WinFitter, with its physically detailed fitting function, to an intensive study of the complex multiple system Kepler-13 using photometry data from all 13 short cadence quarters downloaded from the NASA Exoplanet Archive (NEA) (http://exoplanetarchive.ipac.caltech.edu). The data-point error of our normalized, phase-sequenced and binned (380 points per bin: 0.00025 phase interval) flux values, at 14 ppm, allows the model’s specification for the mean reference flux level of the system to a precision better than 1 ppm. Our photometrically derived values for the mass and radius of KOI13.01 are \(6.8\pm0.6~\mbox{M}_{\mathrm{J}}\) and \(1.44\pm0.04~\mbox{R}_{\mathrm{J}}\). The star has a radius of \(1.67\pm0.05~\mbox{R}_{\odot}\). Our modelling sets the mean of the orbital inclination \(i\) at \(94.35\pm0.14^{\circ}\), with the star’s mean precession angle \(\phi_{p}\)—\(49.1\pm5.0^{\circ}\) and obliquity \(\theta_{o}\)\(67.9 \pm 3.0^{\circ}\), though there are known ambiguities about the sense in which such angles are measured.Our findings did not confirm secular variation in the transit modelling parameters greater than their full correlated errors, as argued by previous authors, when each quarter’s data was best-fitted with a determinable parameter set without prejudice. However, if we accept that most of the parameters remain the same for each transit, then we could confirm a small but steady diminution in the cosine of the orbital inclination over the 17 quarter timespan. This is accompanied by a slight increase of the star’s precession angle (less negative), but with no significant change in the obliquity of its spin axis. There are suggestions of a history of strong dynamical interaction with a highly distorted planet rotating in a 3:2 resonance with its revolution, together with a tidal lag of \(\sim30~\mbox{deg}\). The mean precessional period is derived to be about 1000 y, but at the present time the motion of the star’s rotation axis appears to be supporting the gravitational torque, rather than providing the balance against it that would be expected over long periods of time.The planet has a small but detectable backwarming effect on the star, which helps to explain the difference in brightness just after transit and just before occultation eclipses. In assessing these findings it is recognized that sources of uncertainty remain, notably with possible inherent micropulsational effects, variations from other components of the multiple star, stellar activity, differential rotation and the neglect of higher order terms (than \(r_{1}^{5}\)) in the fitting function, where \(r_{1}\) is the ratio of the radius of the star to the mean orbital separation of planet and host star.     

Explicit stress–strain equations for modeling frictional materials

In this paper, a comprehensive study on simulating the shearing behavior of frictional materials is performed. A set of two explicit equations, describing the relationship among the shear stress ratio and the distortional strain and the volumetric strain, are formulated independently. The equations contain three stress parameters and three strain parameters and another parameter representing the nonuniformity of stress and strain during softening. All the parameters have clear physical significance and can be determined experimentally. It is demonstrated that the proposed equations have the capacity of simulating the complicated shearing behavior of many types of frictional materials including geomaterials. The proposed equations are used to simulate the stress–strain behavior for 27 frictional materials with 98 tests. These materials include soft and stiff clays in both reconstituted and structured states, silicon sands and calcareous sands, silts, compacted fill materials, volcanic soils, decomposed granite soils, cemented soils (both artificially and naturally cemented), partially saturated soils, ballast, rocks, reinforced soils, tire chips, sugar, wheat, and rapeseed. It has been demonstrated that the proposed explicit constitutive equations have the capacity to capture accurately the shearing behavior of frictional materials both qualitatively and quantitatively. A study on model parameters has been performed.     

Studies on the Application of Steady State Assumption in 1DV Model for the Estimation of Settling Velocity of Suspended Sediments in a Shallow Estuary

Settling velocity is one of the important parameters in sediment transport modeling of estuaries. The methods adopted for its determination vary from theoretical equations to experimental methods. The theoretical equation generally adopted in the 1DV model include assumptions in order to simplify the solution. It is generally assumed that either the condition is steady or the vertical diffusion is negligible. This study evaluated the relative importance of the two assumptions made for the estimation of settling velocity. Two approaches were adopted: unsteady and negligible vertical diffusion (NS-NVD) and steady with vertical diffusion (S-VD) to estimate the settling velocity. The Muthupet Estuary in the Coromandal coast of India was selected for the study. The S-VD approach estimated settling velocity fairly well at the two locations with appreciable vertical diffusion. The NS-NVD approach was observed to be superior for estimating settling velocity at shallow reaches of the estuary having low flow velocity. The calculated settling velocity was further applied in 1DV model to predict the suspended sediment concentration. The S-VD approach predicted suspended sediment concentration at those locations with appreciable vertical diffusion with an R² value of 0.82 against 0.67 for the NS-NVD approach. At the other shallow reach of the estuary with low flow velocity, the NS-NVD approach gave an R² value of 0.822 against 0.71 for the S-VD approach. The vertical diffusion was observed to play a secondary role at those locations which are shallow with a water depth of 0.6 m and with a low flow velocity of the order of 0.01 m/s. The study demonstrated that localized hydrodynamic conditions influence the method adopted for the estimation of settling velocity.     

Determination of Non-gravitational Effects in the Motion of Near-Sun Objects 321P, 322P, 323P,and 342P

At the beginning of this century, the SOHO space observatory discovered near-Sun comets with perihelion distances q ≈ 0.05 AU, which remained observable over several close encounters with the Sun. This became one of the surprises in studying the small bodies of the Solar System. Currently, there are objects that have already been observed in four (342P) and five (321P, 322P, and 323P) apparitions. In the present work, the estimates of nongravitational effects are obtained for these objects based on the pair-wise linkage of the apparitions. The calculations show that the observations of these objects are poorly represented if solely the gravitational forces are considered. The magnitude of nongravitational effects in the semimajor axis noticeably changes with time. The motion of all comets is significantly affected by the components of nongravitational forces that are perpendicular to the orbital plane.