用多普勒雷达反射率调整模式大气的云微物理变量

一种简单云分析方案, 用于由多普勒天气雷达反射率反演中尺度大气模式初值分析中的云微物理变量（云水混合比和雨水混合比）和空气湿度变量（比湿），使模式积分初始场反映出观测空间的云微物理特征以及哪些空间位置上的大气处于饱和状态。应用于2002年6月梅雨期安徽省马鞍山市一次降水过程的临近数值预报试验结果表明，模式预报的大气综合反射率与雷达观测的回波图像相近，由云微物理变量变化表示的模式云系演变与雷达观测的回波图像一致, 伴随模拟的中小尺度云系, 模式大气能很快调整出合理的中小尺度流场辐散、辐合结构；它们明显好于模式初始场不引入雷达反射率时的结果，即这种方法对改进临近数值天气预报准确率是有效的。     

Kübler Index and K-Ar Ages of Illite in the Yinshan Polymetallic Deposit, Jiangxi Province, South China: Analyses and Implications

Abstract. The Yinshan polymetallic deposit is a hydrothermal vein-type deposit closely related to Late Jurassic felsic-inter-mediate volcanic-subvolcanic activity in Jiangxi Province, South China. Illite is a major alteration mineral observed in the deposit. Our study shows that the Kübler index of the illite has a close relation to ore-forming fluids of different stages of hydrothermal alteration and mineralization. The early Pb-Zn-Ag mineralization dated at 130–136 Ma is characterized by relatively low water/rock ratios and diffusive fluid movement within phyllite, whereas the later Cu-Au-S mineralization at 122 -125 Ma was accompanied by higher water/rock ratios and localized fluid flow through fractures and channels. Illite formed in the early Pb-Zn-Ag mineralization stage contains swelling layers while the illite formed in the later Cu-Au-S mineralization stage has no swelling layers but was associated with intensive chloritization. The last stage of mineralization (at 104 Ma) was minor and did not produce significant amounts of illite.     

多极化SAR溢油探测影响因素分析研究

Polarimetric synthetic aperture radar(SAR) oil spill detection parameters conformity coefficient(μ), Muller matrix parameters(|C|, B_0), the eigenvalues of simplified coherency matrix(λ_(nos)) and the influence of SAR observing parameters, ocean environment and noise level are investigated. Radarsat-2 data are used to make systematic analysis of polarimetric parameters for different incidences, wind speeds, noise levels and the ocean phenomena(oil slick and look likes). The influence of the SAR observing parameters, the ocean environment and the noise level on the typical polarimetric SAR parameter conformity coefficient has been analyzed. The results indicate that conformity coefficient cannot be simply used for oil spill detection, which represents the image signal to the noise level to some extent. When the signals are below the noise level for the oil slick and the look likes, the conformity coefficients are negative; while the signals above the noise level corresponds to positive conformity coefficients. For dark patches(low wind and biogenic slick) with the signal below the noise,polarization features such as conformity coefficient cannot separate them with oil slick. For the signal above the noise, the oil slick, the look likes(low wind and biogenic slick) and clean sea all have positive conformity coefficients, among which, the oil slick has the smallest conformity coefficient, the look likes the second, and the clean sea the largest value. For polarimetric SAR data oil spill detection, the noise plays a significant role. So the polarimetric SAR data oil spill detection should be carried out on the basis of noise consideration.     

Spatiotemporal characteristics of Qinghai Lake ice phenology between 2000 and 2016

Journal of Geographical Sciences - Lake ice phenology is considered a sensitive indicator of regional climate change. We utilized time series information of this kind extracted from a series of...     

Paleogene of the Huanghekou Sag in the Bohai Bay Basin,NE China: deposition–erosion response to a slope break system of rift lacustrine basins

The sequence architecture and depositional systems of the Paleogene lacustrine rift succession in the Huanghekou Sag, Bohai Bay Basin, NE China were investigated based on seismic profiles, combined with well log and core data. Four second‐order or composite sequences and seven third‐order sequences were identified. The depositional systems identified in the basin include: fan delta, braid delta, meander fluvial delta, lacustrine and sublacustrine fan. Identification of the slope break was conducted combining the interpretation of faults of each sequence and the identification of syndepositional faults, based on the subdivision of sequence stratigraphy and analysis of depositional systems. Multiple geomorphologic units were recognized in the Paleogene of the Huanghekou Sag including faults, flexures, depositional slope break belts, ditch‐valleys and sub‐uplifts in the central sag. Using genetic division principles and taking into consideration tectonic features of the Paleogene of the Huanghekou Sag, the study area was divided into the Northern Steep Slope/Fault Slope Break System, the Southern Gentle Slope Break System and T10 Tectonic Slope Break System/T10 Tectonic Belt. Responses of slope break systems to deposition–erosion are shown as: (1) basin marginal slope break is the boundary of the eroded area and provenance area; (2) ditch‐valley formed by different kinds of slope break belts is a good transport bypass for source materials; (3) shape of the slope break belt of the slope break system controls sediments types; (4) the ditch‐valley and sub‐sag of a slope break system is an unloading area for sediments; and (5) due to their different origins, association characteristics and developing patterns, the Paleogene slope break belt systems in the Huanghekou Sag show different controls on depositional systems. The Northern Fault Slope Break system controls the deposition of a fan delta‐lacustrine‐subaqueous fan, the Southern Gentle Slope Break system controls the deposition of a fluvial–deltaic–shallow lacustrine and sublacustrine fan, and the T10 Tectonic Slope Break System controls the deposition of shallow lacustrine beach bar sandbodies. The existence of a slope break system is a necessary but not a sufficient condition for studying sandbody development. The formation of effective sandbodies along the slope break depends on the reasonable coupling of effective provenance, necessary association patterns of slope break belt, adequate unloading space and creation of definite accommodation space. Copyright © 2013 John Wiley & Sons, Ltd.     

近年我国十大重要金属矿种找矿重大进展与成果

近年我国重要矿产资源勘查成果不断快速涌现。为服务矿产勘查进展长期动态跟踪与成果集成研究,2010~2014年,笔者依托原中国地质调查局发展研究中心承担的《重点成矿区带矿产勘查跟踪与成果集成》、《全国地质勘查进展分析》等项目,以铁、铜、铝、铅锌、金、钨、锡、钼、镍、锰等十大重要金属矿产勘查进展为主要研究对象,研究分析了勘查成果特征。     

含变时滞输入的挠性航天器姿态复合控制

对含变时滞输入的挠性航天器姿态复合控制问题进行了研究,主要是通过设计一个时滞依赖的H_∞控制和干扰观测器（DOBC）相结合的复合分层控制结构,实现姿态角和姿态角速度的稳定控制.本文所提方法的优势为：1）对振动引起的干扰进行精确补偿,减少了干扰对控制效果的影响;2）设计了时滞依赖的状态控制器,降低了时滞对姿态的影响;3）在泛函求解过程中引入了时滞积分不等式分解系数,从而降低了设计的保守性.最后,通过数值仿真验证了本文设计的控制方法的有效性,并分析了时滞量及时滞积分不等式分解系数对闭环系统性能的影响.     

加密探空资料在华东区域业务模式中的应用试验

采用中国气象局2014年6月1日—30日14时加密探空资料,利用华东区域中尺度数值预报业务系统比较同化加密探空观测资料前后模式预报结果的差异。研究表明,同化加密探空资料后,对模式初始时刻不同高度的位势高度、比湿、温度、风速等变量均有一定的影响;对位势高度、温度和风场的影响在高层100—150 h Pa比较显著,而对比湿的影响主要体现在低层700—750 h Pa。同化加密探空资料后模式初始场更接近实况。批量数值试验的统计检验表明,同化加密探空观测资料后对强降水及形势场预报均有不同程度改进,24 h暴雨和大暴雨量级降水的预报技巧分别提高了2.5%和8.1%。     

半潜平台浮子式系泊系统参数优化研究

通过在系泊缆中设置浮子可以改善系泊系统性能,降低平台运动响应。建立浮子式系泊系统的数值计算模型,验证浮子式系泊系统数值计算方法,详细分析浮子设计参数(设置位置和净浮力大小)变化对系泊缆张力特性与平台运动的影响规律,并根据得到的规律选择了优化的浮子系泊系统方案。最后对优化方案进行评估,表明优化方案可以显著降低系泊中的平台水平运动,尤其是低频运动,同时系泊缆张力变化不大,仍满足安全要求。研究结果可为今后浮子式系泊系统设计提供参考。     

苏里格大型致密砂岩气田储层结构与水平井提高采收率对策

在分析苏里格气田辫状河体系及储层结构特征的基础上,提出了剖面储量集中度的概念,建立了厚层块状型、垂向叠置泛连通型、分散局部连通型、分散孤立型4种砂体分布模式,探讨了不同储层结构下的水平井采出程度,提出了水平井提高采收率技术对策。研究结果表明,辫状河沉积体系复合有效砂体由于“阻流带”的存在,直井动用不完善,水平井能克服“阻流带”的影响,提高层内储量动用程度;但由于砂体多层状分散分布,水平井开发会导致纵向含气层系储量动用不充分,影响层间采出程度。对于剖面储量集中度高的厚层块状型、垂向叠置泛连通型储层,采用水平井整体开发,Ⅰ+Ⅱ类井比例达70%以上,可显著提高储量动用程度和采收率。对于剖面储量集中度低的分散局部连通型储层,采用直井井网开发后进行甜点式优选水平井井位加密部署,可提高采收率10%以上。