Soil and Vegetation Spectral Coupling Difference (SVSCD) for Minerals Extraction from Hyperion Data in Vegetation Covered Area

Remote sensing data have been widely applied to extract minerals in geologic exploration, however, in areas covered by vegetation, extracted mineral information has mostly been small targets bearing little information. In this paper, we present a new method for mineral extraction aimed at solving the difficulty of mineral identification in vegetation covered areas. The method selected six sets of spectral difference coupling between soil and plant (SVSCD). These sets have the same vegetation spectra reflectance and a maximum different reflectance of soil and mineral spectra from Hyperion image based on spectral reflectance characteristics of measured spectra. The central wavelengths of the six, selected band pairs were 2314 and 701 nm, 1699 and 721 nm, 1336 and 742 nm, 2203 and 681 nm, 2183 and 671 nm, and 2072 and 548 nm. Each data set’s reflectance was used to calculate the difference value. After band difference calculation, vegetation information was suppressed and mineral abnormal information was enhanced compared to the scatter plot of original band. Six spectral difference couplings, after vegetation inhibition, were arranged in a new data set that requires two components that have the largest eigenvalue difference from principal component analysis (PCA). The spatial geometric structure features of PC1 and PC2 was used to identify altered minerals by spectral feature fitting (SFF). The collecting rocks from the 10 points that were selected in the concentration of mineral extraction were analyzed under a high-resolution microscope to identify metal minerals and nonmetallic minerals. Results indicated that the extracted minerals were well matched with the verified samples, especially with the sample 2, 4, 5 and 8. It demonstrated that the method can effectively detect altered minerals in vegetation covered area in Hyperion image.     

Explicit stress–strain equations for modeling frictional materials

In this paper, a comprehensive study on simulating the shearing behavior of frictional materials is performed. A set of two explicit equations, describing the relationship among the shear stress ratio and the distortional strain and the volumetric strain, are formulated independently. The equations contain three stress parameters and three strain parameters and another parameter representing the nonuniformity of stress and strain during softening. All the parameters have clear physical significance and can be determined experimentally. It is demonstrated that the proposed equations have the capacity of simulating the complicated shearing behavior of many types of frictional materials including geomaterials. The proposed equations are used to simulate the stress–strain behavior for 27 frictional materials with 98 tests. These materials include soft and stiff clays in both reconstituted and structured states, silicon sands and calcareous sands, silts, compacted fill materials, volcanic soils, decomposed granite soils, cemented soils (both artificially and naturally cemented), partially saturated soils, ballast, rocks, reinforced soils, tire chips, sugar, wheat, and rapeseed. It has been demonstrated that the proposed explicit constitutive equations have the capacity to capture accurately the shearing behavior of frictional materials both qualitatively and quantitatively. A study on model parameters has been performed.     

Effects of stocking density on the growth and immunity of Atlantic salmon salmo salar reared in recirculating aquaculture system (RAS)

Atlantic salmon reared in recirculating aquaculture system (RAS) may lead to inappropriately high stocking density, because fish live in a limited space. Finding the suitable stocking density of Atlantic salmon reared in RAS is very important for RAS industry. In this paper, the influence of stocking density on growth and some stress related physiological factors were investigated to evaluate the effects of stocking density. The fish were reared for 220 days at five densities (A: 24 kg/m³; B: 21 kg/m³; C: 15 kg/m³; D: 9 kg/ m³ and E: 6 kg/m³ ). The results show that 30 kg/m³ might be the maximum density which RAS can afford in China. The stocking densities under 30 kg/m³ have no effect on mortality of Atlantic salmon reared in RAS. However, the specific growth rate (SGR), final weight and weight gain in the high density group were significantly lower than the lower density groups and middle density groups. Moreover, feed conversion rate (FCR) had a negative correlation with density. Plasma hormone T₃ and GH showed significant decrease with the increase of the stocking density of the experiment. Furthermore, thyroid hormone (T₃), GH (growth hormone) activities were decreased with stocking density increase. However, plasma cortisol, GOT (glutamic oxalacetic transaminase) and GPT (glutamic pyruvic transaminase) activities were increase with stocking density increase. And the stocking density has no effects on plasma lysozyme of Atlantic salmon reared in RAS. These investigations would also help devise efficient ways to rear adult Atlantic salmon in China and may, in a way, help spread salmon mariculture in China.

     

陕北地区退耕还林还草工程土壤保护效应的时空特征

This paper looks at the Green for Grain Project in northern Shaanxi Province.Based on remote sensing monitoring data,this study analyzes the locations of arable land in northern Shaanxi in the years 2000,2010 and 2013 as well as spatio-temporal changes over that period,and then incorporates data on the distribution of terraced fields to improve the input parameters of a RUSLE model and simulate and generate raster data on soil erosion for northern Shaanxi at different stages with a accuracy verification.Finally,combined with the dataset of farmland change,compared and analyzed the characteristics of soil erosion change in the converted farmland to forest(grassland)and the unconverted farmland in northern Shaanxi,so as to determine the project’s impact on soil erosion over time across the region.The results show that between 2000 and 2010,the soil erosion modulus of repurposed farmland in northern Shaanxi decreased 22.7 t/ha,equivalent to 47.08%of the soil erosion modulus of repurposed farmland in 2000.In the same period,the soil erosion modulus of non-repurposed farmland fell 10.99 t/ha,equivalent to 28.6%of the soil erosion modulus of non-repurposed farmland in 2000.The soil erosion modulus for all types of land in northern Shaanxi decreased by an average of 14.51 t/ha between 2000 and 2010,equivalent to 41.87%of the soil erosion modulus for the entire region in 2000.This suggests that the Green for Grain Project effectively reduced the soil erosion modulus,thus helping to protect the soil.In particular,arable land that was turned into forest and grassland reduced erosion most noticeably and contributed most to soil conservation.Nevertheless,in the period 2010 to 2013,which was a period of consolidation of the Green for Grain Project,the soil erosion modulus and change in volume of soil erosion in northern Shaanxi were significantly lower than in the previous decade.     

A case study on Landscape Component Niche based on Landscape Pattern Indices: Yanchi,Ningxia Province,China

Yanchi County is located in the agro-pastoral ecotone and belongs to the ecologically fragile area of Northwest China.It is important to study the evolution of landscape pattern to curb its environmental degradation.In order to intuitively show how the landscape pattern of the study area changes over time,Landsat Thematic Mappers(TM)and Landsat Operational Land Imager(OLI)data of 1991,2000,2010 and 2017 were used.This paper attempts to apply niche theories and methods into landscape ecology,and constructs a niche model of landscape components by using"n-dimentional hypervolume niche theory"and landscape pattern indices.By evaluating the spatial and temporal evolution of niche from the perspective of two-dimensional space to reflect the changes of landscape pattern in the study area over the past 26 years,new theories and methods were introduced for the characterization of landscape pattern.The results indicate that:1)The larger the attribute and dominance value of landscape components,the higher the ecological niche and the stronger the control effect on the overall landscape.2)The ecological niche of each landscape component was significantly different,just as its control effect on the overall landscape.3)The dynamic change of the ecological niche of each landscape component was different,with grassland,unused land and arable land always in a high dominant position,although the ecological niche of construction land and water area was always low.In general,the introduction of niche theory into the landscape ecology provided a new method to study the changes in regional landscape pattern.     

Post-earthquake economic resilience and recovery efficiency in the border areas of the Tibetan Plateau: A case study of areas affected by the Wenchuan Ms 8.0 Earthquake in Sichuan,China in 2008

Journal of Geographical Sciences - The border areas of the Tibetan Plateau and the neighboring mountainous areas have a high incidence of earthquakes with a magnitude greater than Ms 5.0, as well...     

Analysis of Spatial–Temporal Evolution of Mining-Induced Fracture Field: A Case Study Using Image Processing in the Shaqu Coal Mine,China

Natural Resources Research - Mining-induced fracture plays a key role in gas drainage for gas burst-prone underground coal mines, especially for closely multilayered coal seams. The layout and...     

三元插层材料的合成及其在聚丙烯老化中的应用

以FeCl3?6H2O、NiCl2?6H2O、MgCl2?6H2O为原料，以NaOH为沉淀剂采用水热法合成了镁镍铁水滑石 (MgNiFe-LDH)，通过X射线衍射 (XRD)、傅里叶变换红外光谱 (FTIR) 和扫描电镜 (SEM) 分析了MgNiFe-LDH结构及形貌，探讨了不同陈化时间和水热温度对MgNiFe-LDH合成的影响。将制得的MgNiFe-LDH添加至聚丙烯 (PP) 中，制备MgNiFe-LDH/PP复合材料，通过对材料的加速老化测其力学性能，研究了添加MgNiFe-LDH前后材料力学性能的差异。研究结果表明，当Mg2+:Ni2+:Fe3+=2:1:1，反应温度为140℃、陈化时间为24 h时，合成的MgNiFe-LDH为片状，形貌较为规整，颗粒粒径约为2μm；经加速老化后，填充MgNiFe-LDH 复合材料的抗老化性能优于纯PP，当MgNiFe-LDH的填充量为6 wt% 复合材料拉伸强度不变，可明显提高PP的抗老化性能。     

城镇化与生态环境耦合的动态模拟——研究进展与展望

Urbanization and eco-environment coupling is a research hotspot.Dynamic simulation of urbanization and eco-environment coupling needs to be improved because the processes of coupling are complex and statistical methods are limited.Systems science and cross-scale coupling allow us to define the coupled urbanization and eco-environment system as an open complex giant system with multiple feedback loops.We review the current state of dynamic simulation of urbanization and eco-environment coupling and find that:(1)The use of dynamic simulation is an increasing trend,the relevant theory is being developed,and modeling processes are being improved;(2)Dynamic simulation technology has become diversified,refined,intelligent and integrated;(3)Simulation is mainly performed for three aspects of the coupling,multiple regions and multiple elements,local coupling and telecoupling,and regional synergy.However,we also found some shortcomings:(1)Basic theories are inadequately developed and insufficiently integrated;(2)The methods of unifying systems and sharing data are behind the times;(3)Coupling relations and the dynamic characteristics of the main driving elements are not fully understood or completely identified.Additionally,simulation of telecoupling does not quantify parameters and is not systemically unified,and therefore cannot be used to represent spatial synergy.In the future,we must promote communication between research networks,technology integration and data sharing to identify the processes governing change in coupled relations and in the main driving elements in urban agglomerations.Finally,we must build decision support systems to plan and ensure regional sustainable urbanization.