Determination of Chlorine Contents in Geological Survey of Japan Reference Materials by Prompt Gamma Neutron Activation Analysis

We determined chlorine contents in nine GSJ (Geological Survey of Japan) reference materials (JB-1, 1a, 2, 3; JA-1, 2, 3; JR-1, 2) by prompt gamma neutron activation analysis, employing the standard addition method. Pressed powder disks of each reference material were used for neutron irradiation and gammaray measurement, after known quantities (25-200 μl) of sodium chloride solution were added. The influence of the nearby sodium peak overlap was checked, and fluctuations in the chlorine count rate were corrected using silicon as an internal standard. The slopes of calibration lines for seven reference materials (JB-1, 2, 3; JA-1, 2, 3; JR-2) and SiO₂ powders fall within 5% error, and their chlorine values were obtained from the intercepts. Chlorine contents in JB-1 a and JR-1 were also determined by using the calibration lines. Our chlorine values ranged from 26.1 to 934 μg g-¹, which agrees well with the previously reported values.     

The influence of intense rainfall on the activity of large-scale crystalline schist landslides in Shikoku Island, Japan

Many large landslides in the crystalline schist region of Shikoku Island, Japan, are susceptible to intense rainfall. Through the use of on-site monitoring systems, the activity of landslides and their meteorological triggers can be assessed. Continuous high-intensity rainfall was found to play a key role in provoking landslide movement. This paper investigates the influence of intense rainfall on the activity of crystalline schist landslides by examining rainfall and displacement of four typical landslides. By defining and calculating the effective rainfall and the relative landslide displacement, the relationship between intense rainfall and rainfall-induced landslide movement was analysed. Results indicate that the intense rainfall-induced landslide movement can be correlated with the effective rainfall. From these results, two rainfall thresholds were identified for the landslide risk management of Shikoku Island.     

Exsolution textures in orthopyroxene in aluminous granulites as indicators of UHT metamorphism: New evidence from the Eastern Ghats Belt, India

Highly aluminous orthopyroxene, coexisting with sapphirine, cordierite, sillimanite, quartz and garnet in various combinations, constitute granoblastic mosaic peak metamorphic assemblages in aluminous granulites from three localities in the Eastern Ghats Belt, India. Orthopyroxene contains four types of intergrowths: (a) involving sapphirine with or without cordierite, (b) involving spinel, but without sapphirine, (c) involving cordierite, but without sapphirine and spinel, and (d) involving garnet, without sapphirine, spinel or cordierite. On the basis of textural and compositional data, origin of the intergrowths is ascribed to breakdown of Mg-Tschermak component, locally also involving Fe- and Ti-Tschermak. An attempt is made to compute the “pre-breakdown” compositions of orthopyroxene by image analysis, which shows maximum Al₂O₃ content of 13.4 wt.% in the pristine orthopyroxene. Geothermometry, phase equilibria consideration and application of existing experimental data on alumina solubility in orthopyroxene coexisting with sapphirine and quartz, collectively indicate extreme thermal conditions of metamorphism (> 1000 °C) for the studied assemblages. This re-affirms the notion that Al₂O₃ solubility in orthopyroxene is the most powerful indicator of UHT metamorphism (Harley, S.L., 2004. Extending our understanding of ultrahigh temperature crustal metamorphism. J. Mineral. Petrol. Sci. 99, 140–158). The intergrowths are considered to have formed due to cooling from the thermal peak spanning a temperature range of approximately 150 °C. Appearance of diverse types of intergrowths is probably related to subtle differences in bulk composition, particularly Fe:Mg ratios.     

Determination of Ti, K, Sm and Gd Values in Geological Survey of Japan Reference Materials by Prompt Gamma Neutron Activation Analysis

Prompt gamma neutron activation analysis was applied to the determination of the titanium, potassium, samarium and gadolinium contents of nine Geological Survey of Japan (GSJ) reference materials (JB-1, 1a, 2, 3; JA-1, 2, 3; JR-1, 2). Firstly, the values in JB-1 were determined by the standard addition method: pressed powder disks of JB-1 were used for neutron irradiation and gamma-ray measurements, after known quantities of standard reagents had been added. Secondly, the contents of eight other reference materials were determined by comparison methods using JB-1 as the comparative standard. The precision of analyses were obtained by replicate determinations on these samples. The relative standard deviation was generally less than 5%. For most samples, analysed values agreed well (< 5%) with the recommended values.     

Characteristics of the ratio of dissolved cadmium to phosphate in subtropical coastal waters of Ishigaki Island,Okinawa, Japan

The ratio of dissolved cadmium (Cd) to phosphate (PO₄) in the subtropical coastal area of Ishigaki Island, Okinawa, Japan, was investigated. Twenty vertical seawater samplings were carried out once a month from May 2008 to January 2010. In order to examine how the Cd/PO₄ ratio in seawater varies with the oceanographic conditions (i.e., the water temperature–salinity characteristics), the water masses at the study sites were classified into two types: group 1 with a water temperature of >25°C and a salinity range of 34.0–34.4, and group 2 with a water temperature of <25°C and a salinity of >34.4. A different phytoplankton assemblage was observed in each water mass defined. Different Cd/PO₄ ratios were obtained for the two water mass types, due to the differences between the types in terms of the environmental conditions such as the water temperature–salinity (T–S) characteristics and phytoplankton assemblages, as well as possible variations in the concentrations of dissolved iron, zinc, manganese, and CO₂ in seawater in each water mass.     

Formation process of two massive dams following rainfall-induced deep-seated rapid landslide failures in the Kii Peninsula of Japan

Extreme heavy rainfall due to Typhoon Talas on September 2–4, 2011 in the Kii Peninsula, Japan, triggered numerous floods and landslides. This study investigates the mechanism and the entire process of rainfall-induced deep-seated landslides forming two massive dams in the Kuridaira and Akatani valleys, respectively. The mechanism of the rapid deep-seated landslides is examined through a series of laboratory experiments on samples from sliding surfaces by using undrained high-stress dynamic-loading ring-shear apparatus. The test results indicate that the failure of samples is triggered by excess pore water pressure generation under a shear displacement from 2 to 7 mm with a pore pressure ratio ranging from 0.33 to 0.37. The rapid movement of landslides is mainly attributed to high mobility due to the liquefaction behavior of both sandstone-rich and shale samples. Geomorphic settings and landslide mobility are major contributing factors to the dam formation. Additionally, shear displacement control tests show that a certain amount of shear displacement between 2 and 7 mm along the sliding surfaces of the gravitationally deformed slopes might have led to the failures. Importantly, computer simulation with LS-RAPID software using input parameters obtained from physical experiments is employed to interpret the entire formation process of the abovementioned two landslide dams. The simulation results are examined in accordance with the observed on-site geomorphic features and recorded data to explain the possibility of sliding processes. The results further point out that local failures are initiated from the lower middle part of the landslide bodies where the geological boundary exists. This condition most probably influences the landslide initiation in the two case studies. This research is therefore helpful for hazard assessment of slopes that are susceptible to deep-seated landslides and other sequential processes in areas with geology and geomorphology similar to that of the Kii Peninsula.     

A refined garnet - biotite Fe−Mg exchange geothermometer and its application in amphibolites and granulites

A new formulation of garnet-biotite Fe–Mg exchange thermometer has been developed through statistical regression of the reversed experimental data of Ferry and Spear. Input parameters include available thermo-chemical data for quaternary Fe–Mg–Ca–Mn garnet solid solution and for excess free energy terms, associated with mixing of Al and Ti, in octahedral sites, in biotite solid solution. The regression indicates that Fe–Mg mixing in biotite approximates a symmetrical regular solution model showing positive deviation from ideality withW _FeMg ^bi =1073±490 cal/mol. H _r and S _r for the garnet-biotite exchange equilibrium were derived to be 4301 cal and 1.85 cal respectively. The resultant thermometer gives consistent results for rocks with a much wider compositional range than can be accommodated by earlier formulations.     

Heat-Mitigation Effects of Irrigated Rice-Paddy Fields Under Changing Atmospheric Carbon Dioxide Based on a Coupled Atmosphere and Crop Energy-Balance Model

Boundary-Layer Meteorology - Known as the heat-mitigation effect, irrigated rice-paddy fields distribute a large fraction of their received energy to the latent heat during the growing season. The...