贵州喀斯特山区墓地利用管理与耕地保护

通过对贵州亮岩峰丛山地的墓地进行随机抽样调查和统计分析,显示出墓地在一定坡度上的特定地段有集中趋势;在对墓地选址与土层厚度进行显著性检验后表明:喀斯特地区土层厚度著性影响墓地分布。以至于绝大多数墓地集中分布在日照较好、排水畅通、土层较厚的阳坡山麓地带,以占用土层较厚的优质耕地为主。在现实的墓地利用管理实践中,实施统一规划、集中管理,建立有偿使用制度、严格用地指标,加强墓地绿化,实行墓地园林化建设等措施,以期综合性多元化开发利用墓地,有效保护耕地资源。     

浙江磐安蕨类植物资源及其开发利用

调查统计，磐安共有蕨类植物112种，隶属于60属、34科。地理成分分析表明，种的地理成分以东亚分布，特别是中国一日本分布为主，区系显示出较明显的亚热带一暖温带过渡的特征。同时从水平分布、垂直分布和生态分布三种分布型分析了磐安蕨类植物资源的分布规律，并根据其用途，划分为药用植物资源、食用植物资源、观赏植物资源等。在以上研究的基础上，提出了合理开发利用磐安蕨类植物资源的一些建议。     

Elastic lateral dynamic impedance functions for a rigid cylindrical shell type foundation

Elastic lateral dynamic impedance functions are defined as the ratio of the lateral dynamic force/moment to the corresponding lateral displacement/rotation at the top ending of a foundation at very small strains. Elastic lateral dynamic impedance functions have a defining influence on the natural frequencies of offshore wind turbines supported on cylindrical shell type foundations, such as suction caissons, bucket foundations, and monopiles. This paper considers the coupled horizontal and rocking vibration of a cylindrical shell type foundation embedded in a fully saturated poroelastic seabed in contact with a seawater half‐space. The formulation of the coupled seawater–shell–seabed vibration problem is simplified by treating the shell as a rigid one. The rigid shell vibration problem is approached by the integral equation method using ring‐load Green's functions for a layered seawater‐seabed half‐space. By considering the boundary conditions at the shell–soil interface, the shell vibration problem is reduced to Fredholm integral equations. Through an analysis of the corresponding Cauchy singular equations, the intrinsic singular characteristics of the problem are rendered explicit. With the singularities incorporated into the solution representation, an effective numerical method involving Gauss–Chebyshev method is developed for the governing Fredholm equations. Selected numerical results for the dynamic contact load distributions, displacements of the shell, and lateral dynamic impedance functions are examined for different shell length–radius ratio, poroelastic materials, and frequencies of excitation. Copyright © 2016 John Wiley & Sons, Ltd.     

Investigation of the elevation of saltwater wedge due to subsurface dams

Subsurface dams are rather effective and used for the prevention of saltwater intrusion in coastal regions around the world. We carried out the laboratory experiments to investigate the elevation of saltwater wedge after the construction of subsurface dams. The elevation of saltwater wedge refers to the upward movement of the downstream saltwater wedge because the subsurface dams obstruct the regional groundwater flow and reduce the freshwater discharge. Consequently, the saltwater wedge cannot further extend in the longitudinal direction but rises in the vertical profile resulting in significant downstream aquifer salinization. In order to quantitatively address this issue, field-scale numerical simulations were conducted to explore the influence of various dam heights, distances, and hydraulic gradients on the elevation of saltwater wedge. Our investigation shows that the upward movement of the saltwater wedge and its areal extension in the vertical domain of the downstream aquifer become more severe with a higher dam and performed a great dependence on the freshwater discharge. Furthermore, the increase of the hydraulic gradient and the dam distance from the sea boundary leads to a more pronounced wedge elevation. This phenomenon comes from the variation of the freshwater discharge due to the modification of dam height, location, and hydraulic gradient. Large freshwater discharge can generate greater repulsive force to restrain the elevation of saltwater wedge. These conclusions provide theoretical references for the behaviour of the freshwater–seawater interface after the construction of subsurface dams and help optimize the design strategy to better utilize the coastal groundwater resources.     

Influence of a coarse interlayer on seawater intrusion and contaminant migration in coastal aquifers

Vertical 2D slice laboratory experiments were carried out in homogenous and layered sand tanks to elucidate the effects of a highly permeable (coarse‐grained sand) interlayer on seawater intrusion and transport of contaminants to a coastal sea. Tidal fluctuations produced oscillations in the seawater–freshwater transition zone, fluctuations of the contaminant infiltration rate and a zigzag contaminant plume outline. The seawater wedge became discontinuous at the (vertical) edges of the interlayer because of increased lateral movement of the seawater–freshwater interface within the interlayer. The contaminant plume formed a tail within the interlayer depending on the tidal stage, and similar to the wedge, its movement was accentuated. A simple analytical model that neglected vertical flow reliably predicted steady‐state seawater intrusion into the coastal aquifer. Numerical modeling was used to gain insight into the groundwater hydrodynamics and contaminant migration. The numerical results confirmed the experimental findings, i.e. that a highly permeable interlayer can provide a rapid transit path for contaminants to reach the seaward boundary and that the interlayer amplifies the effects of tidal fluctuations, resulting in wider transition zones for the seawater wedge and contaminant plume. Numerical simulations further showed that, with increasing interlayer hydraulic conductivity, the maximum seawater intrusion distance inside the interlayer increases approximately linearly. For the fixed‐head contaminant injection condition used, the model showed that contaminant infiltration increases approximately logarithmically with increasing interlayer hydraulic conductivity (other factors held fixed). Copyright © 2013 John Wiley & Sons, Ltd.     

我国尾矿综合利用研究现状及建议

尾矿资源综合利用问题已受到世界各国的重视,其对策已由消极的废物处理转向物质再回收,尾矿资源化的发展趋势越来越清晰。但是,我国尾矿综合利用率和发达国家相比还存在较大的差距。大量的尾矿积存,对矿山周边地区环境、土地利用造成了严重的影响。开展典型尾矿资源综合利用技术研究和推广尾矿资源产业化利用技术研究与推广,不但可使原来资源枯竭或资源不足的矿山焕发青春,而且还能够重新成为新的资源基地,以开辟新的材料科技领域,推动科技进步,同时也可以解决环境污染、改善生态环境和整治国土,具有巨大社会、经济和环境效益。因此尾矿的综合利用要做到国家重視、立法保障、评价先行、技术支撑、全部利用,才能真正解决尾矿污染等问题。     

Development and Utilization of the World’s and China’s Bulk Mineral Resources and their Supply and Demand Situation in the Next Twenty Years

Bulk mineral resources of iron ores, copper ores, bauxite, lead ores, zinc ores and potassium salt play a pivotal role on the world’s and China’s economic development. This study analyzed and predicted their resources base and potential, development and utilization and their world’s and China’s supply and demand situation in the future 20 years. The supply and demand of these six bulk mineral products are generally balanced, with a slight surplus, which will guarantee the stability of the international mineral commodity market supply. The six mineral resources(especially iron ores and copper ores) are abundant and have a great potential, and their development and utilization scale will gradually increase. Till the end of 2014, the reserveproduction ratio of iron, copper, bauxite, lead, zinc ores and potassium salt was 95 years, 42 years, 100 years, 17 years, 37 years and 170 years, respectively. Except lead ores, the other five types all have reserve-production ratio exceeding 20 years, indicative of a high resources guarantee degree. If the utilization of recycled metals is counted in, the supply of the world’s six mineral products will exceed the demand in the future twenty years. In 2015–2035, the supply of iron ores, refined copper, primary aluminum, refined lead, zinc and potassium salt will exceed their demand by 0.4–0.7 billion tons(Gt), 5.0–6.0 million tons(Mt), 1.1–8.9 Mt, 1.0–2.0 Mt, 1.2–2.0 Mt and 4.8–5.6 Mt, respectively. It is predicted that there is no problem with the supply side of bulk mineral products such as iron ores, but local or structural shortage may occur because of geopolitics, monopoly control, resources nationalism and trade friction. Affected by China’s compressed industrialized development model, the demand of iron ores(crude steel), potassium salt, refined lead, refined copper, bauxite(primary aluminum) and zinc will gradually reach their peak in advance. The demand peak of iron ores(crude steel) will reach around 2015, 2016 for potassium salt, 2020 for refined lead, 2021 for bauxite(primary aluminum), 2022 for refined copper and 2023 for zinc. China’s demand for iron ores(crude steel), bauxite(primary aluminum) and zinc in the future 20 years will decline among the world’s demand, while that for refined copper, refined lead and potassium salt will slightly increase. The demand for bulk mineral products still remains high. In 2015–2035, China’s accumulative demand for iron ores(crude steel) will be 20.313 Gt(13.429 Gt), 0.304 Gt for refined copper, 2.466 Gt(0.616 Gt) of bauxite(primary aluminum), 0.102 Gt of refined lead, 0.138 Gt of zinc and 0.157 Gt of potassium salt, and they account for the world’s YOY(YOY) accumulative demand of 35.17%, 51.09%, 48.47%, 46.62%, 43.95% and 21.84%, respectively. This proportion is 49.40%, 102.52%, 87.44%, 105.65%, 93.62% and 106.49% of that in 2014, respectively. From the supply side of China’s bulk mineral resources, it is forecasted that the accumulative supply of primary(mine) mineral products in 2015–2035 is 4.046 Gt of iron ores, 0.591 Gt of copper,1.129 Gt of bauxite, 63.661 Mt of(mine) lead, 0.109 Gt of(mine) zinc and 0.128 Gt of potassium salt, which accounts for 8.82%, 13.92%, 26.67%, 47.09%, 33.04% and 15.56% of the world’s predicted YOY production, respectively. With the rapid increase in the smelting capacity of iron and steel and alumina, the rate of capacity utilization for crude steel, refined copper, alumina, primary aluminum and refined lead in 2014 was 72.13%, 83.63%, 74.45%, 70.76% and 72.22%, respectively. During 2000–2014, the rate of capacity utilization for China’s crude steel and refined copper showed a generally fluctuating decrease, which leads to an insufficient supply of primary mineral products. It is forecasted that the supply insufficiency of iron ores in 2015–2035 is 17.44 Gt, 0.245 Gt of copper in copper concentrates, 1.337 Gt of bauxite, 38.44 Mt of lead in lead concentrates and 29.19 Mt of zinc in zinc concentrates. China has gradually raised the utilization of recycled metals, which has mitigated the insufficient supply of primary metal products to some extent. It is forecasted that in 2015–2035 the accumulative utilization amount of steel scrap(iron ores) is 3.27 Gt(5.08 Gt), 70.312 Mt of recycled copper, 0.2 Gt of recycled aluminum, 48 Mt of recycled lead and 7.7 Mt of recycled zinc. The analysis on the supply and demand situation of China’s bulk mineral resources in 2015–2035 suggests that the supply-demand contradiction for these six types of mineral products will decrease, indicative of a generally declining external dependency. If the use of recycled metal amount is counted in, the external dependency of China’s iron, copper, bauxite, lead, zinc and potassium salt will be 79%, 65%, 26%, 8%, 16% and 18% in 2014, respectively. It is predicted that this external dependency will decrease to 62%, 64%, 20%,-0.93%, 16% and 14% in 2020, respectively, showing an overall decreasing trend. We propose the following suggestions correspondingly.(1) The demand peak of China’s crude steel and potassium salt will reach during 2015–2023 in succession. Mining transformation should be planned and deployed in advance to deal with the arrival of this demand peak.(2) The supply-demand contradiction of China’s bulk mineral resources will mitigate in the future 20 years, and the external dependency will decrease accordingly. It is suggested to adjust the mineral resources management policies according to different minerals and regions, and regulate the exploration and development activities.(3) China should further establish and improve the forced mechanism of resolving the smelting overcapacity of steel, refined copper, primary aluminum, lead and zinc to really achieve the goal of "reducing excess production capacity".(4) In accordance with the national strategic deployment of "One Belt One Road", China should encourage the excess capacity of steel, copper, alumina and primary aluminum enterprises to transfer to those countries or areas with abundant resources, high energy matching degree and relatively excellent infrastructure. Based on the national conditions, mining condition and geopolitics of the resources countries, we will gradually build steel, copper, aluminum and lead-zinc smelting bases, and potash processing and production bases, which will promote the excess capacity to transfer to the overseas orderly.(5) It is proposed to strengthen the planning and management of renewable resources recycling and to construct industrial base of renewable metal recycling.(6) China should promote the comprehensive development and utilization of paragenetic and associated mineral species to further improve the comprehensive utilization of bulk mineral resources.     

贵州织金下寒武统黑色页岩矿物岩石成分及资源利用特征

通过野外采样、化学分析、电子探针(EPMA)和X射线衍射(XRD)分析等手段,研究了贵州织金地区黑色页岩矿物成分、化学组分、微量元素、稀土元素特征。研究区矿样化学成分以SiO_2和Al_2O_3为主,且具有高K低Na的特征。电子探针和X射线衍射分析表明,研究区黑色页岩主要矿物组成有石英、粘土矿物、白云石及黄铁矿等。织金黑色页岩中Pb、Ni、U、V、Cr等金属元素存在不同程度的富集,稀土元素总量为153.2×10~(-6)~224.89×10~(-6),属轻稀土元素富集型。同时从多金属层、页岩气、页岩提钾及近底部含磷铀矿资源等方面讨论了织金黑色页岩资源化利用。织金黑色页岩多金属层含有Mo、V、Ni、Ag及U等多金属元素,具综合利用价值;其中有机碳含量达到页岩气开发大于2%的条件,可进一步开展研究;页岩中伊利石含量较多,可提取黑色页岩中的钾制备含钾复合肥;黑色页岩底部与磷矿层接触带产出磷铀矿,主要为胶状磷铀矿,接触带可作为铀矿找矿的标志层。     

黑龙江省嫩江县三矿沟铁铜矿床矿石特征及意义

三矿沟矿床位于黑龙江省嫩江县多宝山矿集区西北部,为小型矽卡岩型铁铜矿床。在野外地质调查与ICP_MS测试的基础上,通过显微观察、扫描电镜与电镜能谱分析,对三矿沟矿床的矿石特征进行了研究。在矿石中新识别出钨铁矿、白钨矿、锡石、自然铋、碲铋矿、辉铋矿、硫铜铋矿、硫铋铜矿、碲银矿、银金矿、金银矿、自然金,钴黄铁矿、辉砷钴矿、含锌硫砷铜矿等金属矿物。矿石有用金属元素为Cu、Fe、Zn、W、Co、In、Bi,建议对这些元素展开进一步的研究,并在开采时进行综合评价。详细的矿石镜下研究结果显示,矿床形成过程分为内生成矿期与表生期,其中内生成矿期分为干矽卡岩阶段、湿矽卡岩阶段、氧化物阶段(主要的铁矿化阶段)和低热液-硫化物阶段这4个阶段(主要的铜矿化阶段),表生期只包含表生阶段。其中铁矿化形成于高温阶段,铜矿化系中温热液交代形成。     

宁波市地下空间开发利用地质环境制约因素研究

地质环境条件是制约地下空间开发利用的最基本因素,只有正确认识地下空间开发对地质环境的影响,才能避免地下空间利用中产生的各种不利后果。基于对宁波市地质环境背景条件的认识,分别从水文地质条件、工程地质条件和环境地质问题等三个方面,研究了地下空间开发利用的影响因素。研究结果表明,水文地质条件的制约因素有孔隙潜水位埋深、含水层厚度、岩土层透水性能和基坑突涌可能性等;工程地质条件的制约因素有软土厚度、人工填土厚度、土质均匀性和地层组合等;主要环境地质问题为地面沉降和浅层天然气影响等。通过本次研究,为宁波市地下空间开发利用地质环境适宜性评价奠定了基础,为宁波市地下空间的合理开发利用提供了技术支撑。