Multiple statistical approaches for the discrimination of mangrove species of Rhizophoraceae using transformed field and laboratory hyperspectral data

This study aims at discriminating eight mangrove species of Rhizophoraceae family of Indian east coast using field and laboratory spectra in spectral range (350–2500 nm). Parametric and non-parametric statistical analyses were applied on spectral data in four spectral modes: (i) reflectance (ii) continuum removed, (iii) additive inverse and (iv) continuum removed additive inverse. We introduced continuum removal of inverse spectra to utilize the advantage of continuum removal in reflectance region. Non-parametric test gave better separability than parametric test. Principal component analysis and stepwise discriminant analysis were applied for feature reduction and to identify optimal wavelengths for species discrimination. To quantify the separability, Jeffries–Matusita distance measure was derived. Green (550 nm), red edge (680–720 nm) and water absorption region (1470 and 1850 nm) were found to be optimal wavelengths for species discrimination. The continuum removal of additive inverse spectra gave better separability than the continuum removed spectra.     

Reaction time scales for sulphate reduction in sediments of acidic pit lakes and its relation to in-lake acidity neutralisation

Sulphate reduction is a key reaction to remove acidity from water bodies affected by acid mine drainage. In this study, ³⁵SSO₄²⁻ reduction rates determined in sediments from a variety of acidic lignite pit lakes have been compiled. The rates decreased with pH and are strongly dependent on carbon substrate. The rates were fitted to a Monod model adapted to the specific conditions of acidic pit lakes (APL) sediments: i) sulphate reduction rate is independent from sulphate concentration due to the high concentration typically observed in APL systems (10–30 mM), ii) the observed pH dependency of sulphate reduction was accounted for by an inhibition function F_inihibt which considers the occurrence of low cell numbers of sulphate reducing bacteria at pH values < 4.75. Simulated steady-state sulphate reduction rates are predicting measured rates at carbon substrate concentrations of <10 μM. Estimated steady-state reaction time scales range between 2.4 h at pH 7 and 41 h at pH 3 at a carbon half-saturation constant of K_C−S = 100 μM and are increasing with increasing K_C−S values. Time scales at low pH are too long to allow for significant generation of alkalinity during the time of residence of groundwater passing through the top and hence most reactive zone of APL sediments which has important implications for the remediation of acidic pit lakes.     

总梯度模方法在低纬度地区航磁资料解释中的应用

对于低纬度地区的航空磁测的ΔT资料,如果化极处理时对磁化方向判断存在误差,用目前的化极方法进行资料处理,要比在高纬度地区化极发生更大的畸变,不适于对资料进行解释。通过一些模型计算及一些实际资料对比,在低纬度地区用航磁总场梯度模划分磁性体地面投影边界是简单实用的一种方法。     

Comparative Study of the Carbon Emission Situation and Goals between China and India

As the two large developing and populous countries, China and India face the dual challenges of economic development and climate change. Both of them are active in carbon emissions reduction, while India also bears the pressure of being “benchmarked” against China. With taking China and India as the sample of a comparative analysis, and the statistical value of a long sequence as the basic analysis data, based on the detailed analysis and comparison of carbon emissions history, the carbon emissions situation of the two countries from various dimensions including economic development, energy reserves and consumption, etc. were comparatively analyzed. The carbon intensity and energy structure after achieving the objectives were measured and compared by focusing on the carbon emissions reduction targets in China and India. The comparative results show that: China’s total carbon emissions are greater than India’s, but the growth rate of emissions, per capita emissions are significantly lower than India’s, while the carbon intensity decreases significantly faster than that of India. China has taken more efforts to make commitments to carbon reduction than India. With India’s energy structure adjustment, the situation will be gradually better than that in China.     

分形分维理论在地质灾害发育及空间分布规律中的应用——以长安区滑坡、崩塌地质灾害为例

长安区区内地层岩性、地质构造多样,加之人类经济工程活动、降雨、地震等诱发影响,秦岭北坡及黄土台塬边缘滑坡崩塌地质灾害发育,是陕西省地质灾害较严重的县(区)之一。本文以长安区为研究区域,在对长安区自然地理及区域地质环境条件等资料充分收集的基础上,结合长安区滑坡崩塌灾害点的实际调查资料,详细分析了长安区的滑坡崩塌灾害发育特征及空间分布规律,并采用网络覆盖法,对长安区滑坡崩塌地质灾害的空间分布进行了分形分维计算。求得地质灾害的空间分布分维值为0.876 6,反应出长安区滑坡崩塌地质灾害空间分布特性的复杂性。研究结果表明,分形分维理论能合理评价地质灾害空间分布特征,对类似地区的地质灾害空间分布特征分析具有借鉴意义。     

深海嗜热异化铁还原菌Caloranaerobacter ferrireducens DY22619T对不同铁氧化物的铁还原特性

异化铁还原微生物在铁元素的地球化学循环中具有重要意义。深海热液活动是大洋铁元素的重要来源,目前深海热液环境中铁代谢相关微生物研究很少。本文对一株分离自深海热液区的嗜热异化铁还原菌新种Caloranaerobacter ferrireducens DY22619T的铁还原特性进行分析,比较了该菌对无定形羟基氧化铁、无定形铁氧化物和针铁矿3种不同铁氧化物的铁还原速率;并利用透射电镜对矿化产物进行矿物形貌、组成元素和晶型的分析。研究发现该菌生长在指数期至稳定期时,铁还原速率最快,其中对无定形羟基氧化铁和无定形铁氧化物的还原速率较高,达2.82 μmol/h和2.15 μmol/h;透射电镜结果表明,该菌可将3种不同胞外铁氧化物均还原矿化形成颗粒状磁铁矿,由针铁矿矿化形成的磁铁矿少但粒径最大,而由无定形铁氧化物形成的磁铁矿晶面不同于另外两种铁氧化物。结果表明,该菌有很强的铁还原和矿化能力,能厌氧呼吸还原三价铁氧化物,但是铁氧化物的性质对该菌胞外铁还原能力和矿化形成的磁铁矿的性质有重要影响。本研究为认识深海热液环境中异化铁还原菌在铁元素的地球化学循环和生物成矿过程提供了参考。     

Nano-scale pore structure and fractal dimension of organic-rich Wufeng-Longmaxi shale from Jiaoshiba area,Sichuan Basin: Investigations using FE-SEM,gas adsorption and helium pycnometry

Much attention have been recently paid to the upper Ordovician Wufeng shale (O₃w) and lower Silurian Longmaxi shale (S₁l) in the Jiaoshiba area of Sichuan Basin, which is now the largest producing shale gas field in China. Field emission scanning electron microscopy (FE-SEM), low pressure gas (N₂ and CO₂) adsorption, helium pycnometry, X-ray diffraction and geochemical analyses were performed to investigate the pore structure and fractal dimension of the pores in O₃w-S₁l shale formation in the Jiaoshiba area. FE-SEM images show that organic matter (OM) pores are dominant in the organic-rich samples and these pores are often irregular, bubble-like, elliptical and faveolate in shape, while in organic-poor samples, limited and isolated interparticle (interP), intraparticle (intraP) and OM pores are observed. Reversed S-shaped isotherms obtained from nitrogen adsorption are type Ⅱ, and hysteresis loops indicate that the shape of micropore in the samples is slit-or plate-like. BET surface areas and total pore volume vary from 12.2 to 27.1 m²/g and from 1.8 × 10⁻² to 2.9 × 10⁻² cm³/g, with an average of 19.5 m²/g and 2.3 × 10⁻² cm³/g, respectively. Adsorption volume from both N₂ and CO₂ adsorption increases with respect to TOC contents. Porosities obtained from helium porosimetry are comparable with these from gas (CO₂ and N₂) adsorption in O₃w-S₁l shale. However, porosity determined by quantitative FE-SEM analysis is much smaller, which is mainly related to limited resolution and the small areas of investigation.Based on the Frenkel-Halsey-Hill (FHH) model of low-pressure N₂ adsorption, fractal dimensions of the pores varied from 2.737 to 2.823. Relationships between pore structure parameters and TOC content, mineral composition and fractal dimension reveal that the fractal dimension is mainly associated with micropores. Samples with higher TOC content, higher quartz content and lower clay content tend to contain more heterogeneous micropores, resulting in higher fractal dimensions and more complicated pore structure in shales. Therefore, fractal dimension is an effective parameter to reflect the complexity of pore structure and the degree of micropore development in O₃w-S₁l shale.     

Numerical modeling study of mineralization induced by methane cold seep at the sea bottom

In order to investigate the response of authigenic minerals to gas hydrate geo-systems, the biogeochemical processes and its induced mineralization were predicted by employing the comprehensive reactive transport modeling approach. Based on the available data extracted from the northern continental slope area of the South China Sea, a 1-D vertical column model was developed. Three cases with different upward methane flux rates and three cases with different mineral compositions, i.e., a total of six cases were designed to investigate the effects of variations in the depth of sulfate methane transition zone (SMTZ) and in the mineral composition on the formation of authigenic minerals. The simulation results indicate that the SMTZ depth influenced by both the upward methane flux rate and the initial composition played an important role in the formation of authigenic minerals. The AOM reaction is intensive at the interface, and the precipitation amount of calcite is large, which is mainly controlled by AOM. When the methane leakage rate is 20 times higher than the base case, aragonite starts to precipitate. During the simulation, oligoclase, k-feldspar, smectite-Na, smectite-Ca, chlorite dissolved. Our study specific to this area as a starting point may provide a quantitative approach for investigating carbonate and pyrite formation in hydrate-bearing sediments accounting for methane oxidation and sulfate reduction. The method presented here and the model built in this study can be used for other sites with similar conditions. In addition, this study may serve as an indication for the potential natural gas hydrate reservoir in depth, and is also significant for marine carbon and sulfur cycle.     

基于边坡稳定性计算方法比较分析

将强度折减法应用于边坡稳定性分析中,折减土体强度,代入有限元程序进行计算,直至计算不收敛,此时的折减系数即为安全系数。结合工程实例,将强度折减法应用于边坡稳定性的分析,利用瑞典圆弧法,结合岩土工程设计类软件天汉以及有限元分析软件ABAQUS分析边坡稳定性,并对安全系数进行对比,3种计算方法得出的安全系数差别不大,安全系数精度都能满足工程要求。