海岸线长度与分维在不同比例尺地图上的变化研究

结合国内外海岸线分形研究进展 ,以江苏省海岸线为例 ,系统地探讨了不同比例尺地图上海岸线长度与分维的变化及其规律。指出海岸线长度与地图比例尺之间存在有 lg L =algk b的基本关系 ;其次 ,对于同一条海岸线来说 ,使用量规法和网格法计算所得分维结果是不同的 ,使用量规法的计算结果大于使用网格法的计算结果 ;再者 ,在不同比例尺地图上 ,同一海岸线的分维是不同的 ,随着地图比例尺的逐渐变小 ,海岸线分维相应地逐渐变小 ,且在不同比例尺间使用量规法计算所得海岸线分维结果的差值大于使用网格法计算所得海岸线分维结果的差值     

GIS平台下分形维数计算的设计开发和应用

GIS作为一种新兴的技术在空间数据处理和解析方面具有强大的扩展功能,已经在测绘领域得到了广泛的应用。本文针对分形维数计算的问题,在GIS平台下基于空间数据模型提出了该问题的解决方案,并利用通用COM技术设计和开发了分形维数计算系统。该系统成功地应用于工程实践,对今后GIS在相关专业领域更深层次的应用具有一定的借鉴意义。     

安阳矿区双全井田岩性结构与煤体变形的关系

煤体变形程度控制着煤与瓦斯突出和煤层气的可开发性,煤体结构空间展布预测是人们长期关注的焦点。以岩体力学和分形几何学基本理论为指导,以安阳矿区双全井田为例,通过计算岩体强度因子和分形维数,系统探讨了岩性结构对煤体变形的影响。研究表明,岩体强度因子和分形维数与断层和测井曲线判识的煤体结构之间存在密切关系:低强度因子和分形维数区,煤体易发生韧性变形,软煤发育;高强度因子和分形维数区,煤体(和岩体)以脆性变形为主,以断层发育为特征。这一结论为井田构造发育特征和软煤空间展布所证实。岩体力学和分形几何学的引入,为煤体结构空间展布区域预测提供了一种新途径。     

泥石流堆积物的粒度分布及其分形结构

泥石流堆积物主要由砾石、砂砾、粉粒和粘粒组成,组成泥石流堆积物的颗粒级配变幅很大,从直径大于数十米的巨砾到肉眼难以看见的几微米的胶体微粒均有分布,大小颗粒粒径之比可达106—107。泥石流堆积物颗粒具有明显的自相似性和无标度区间。本文以小江流域多处泥石流堆积物为研究对象,采用图解法全面分析了泥石流堆积物的粒度组成特征,根据分形理论计算了泥石流堆积物颗粒的分维值,对泥石流堆积物的分形特征进行探讨,并与泥石流堆积物粒度特征相联系,发现分维很好的反映了泥石流堆积物颗粒组成及其粒度分布特征。将泥石流堆积物颗粒分维与泥石流的粘性、形成年代等性质相联系,以找出它们彼此之间的关系。     

Investigation of the effect of aggregate shape and surface roughness on the slake durability index using the fractal dimension approach

Argillaceous rocks cover about one thirds of the earth's surface. The major engineering problems encountered with weak- to medium-strength argillaceous rocks could be slaking, erosion, slope stability, settlement, and reduction in strength. One of the key properties for classifying and determining the behavior of such rocks is the slake durability. The concept of slake durability index (SDI) has been the subject of numerous researches in which a number of factors affecting the numerical value of SDI were investigated. In this regard, this paper approaches the matter by evaluating the effects of overall shape and surface roughness of the testing material on the outcome of slake durability indices.

For the purpose, different types of rocks (marl, clayey limestone, tuff, sandstone, weathered granite) were broken into chunks and were intentionally shaped as angular, subangular, and rounded and tested for slake durability. Before testing the aggregate pieces of each rock type, their surface roughness was determined by using the fractal dimension. Despite the variation of final values of SDI test results (values of I_d), the rounded aggregate groups plot relatively in a narrow range, but a greater scatter was obtained for the angular and subangular aggregate groups. The best results can be obtained when using the well rounded samples having the lowest fractal values. An attempt was made to analytically link the surface roughness with the I_d parameter and an empirical relationship was proposed. A chart for various fractal values of surface roughness to use as a guide for slake durability tests is also proposed. The method proposed herein becomes efficient when well rounded aggregates are not available. In such condition, the approximate fractal value for the surface roughness profile of the testing aggregates could be obtained from the proposed chart and be plugged into the empirical relation to obtain the corrected I_d value. The results presented herein represent the particular rock types used in this study and care should be taken when applying these methods to different type of rocks.     

西北地区泥石流沟形态因素的非线性分析——以兰州市为例

以兰州市区96条主要的泥石流沟为例,利用分形理论的统计自相似性对泥石流沟数的累计分布随沟谷形态要素沟道比降、汇水面积和沟道长度的变化进行了分析;并与不同流域形态要素的分维进行了比较,探讨了分维不同的原因。兰州市区泥石流沟三个形态要素均具有统计意义上的自相似性,其中以汇水面积显示出分维最小(0.46),沟道长度次之(0.71),沟道比降最大(1.09)。分维的大小描述了作为系统的沟谷及其泥石流的形成的空间结构,即分形结构,同时也反映了不同形态要素对系统所起作用的差异,分维越小,所起作用越显著。其结果对西北干旱半干旱地区石流灾害的进一步研究与防治提供了新的思路。     

应用航磁数据分维计算推断火成岩的分布

计算巴彦浩特盆地航磁异常的分维数, 对计算出的分维数绘制等值线图, 并根据分形特征对该地区的火成岩进行划分, 得到了以往直接对航磁异常图进行推断解释所不能得到的良好地质效果。最后讨论如何选取最佳窗口和最佳网格来计算分维数, 并对此提出了2个经验。     

河流形态的分维及与洪水关系的探讨——以长江中下游为例

河流水系形态特征可以通过河流的分形特征来反映,分形维数则是河流分形特征的量化表示,其与河流洪水之间存在着一定的关系。以长江中下游为例,利用网格覆盖法计算出长江中下游河流分维,分析了长江中下游河流的分形特性,并在此基础上结合长江中下游洪水分析不同水系特征下洪水的特点。研究结果表明,一般来说河道分维越大、河网分维越小,洪水发生可能性则越高。     

Interpretation of single-well tracer tests using fractional-flow dimensions. Part 1: Theory and mathematical models

Generalized equations using fractional-flow dimensions were derived to estimate the Darcy and seepage velocities obtained from the point-dilution and the single-well injection-withdrawal field tests conducted in fractured-rock aquifers. Seepage velocities can only be estimated from single-well tests if the hydraulic conductivity and the hydraulic gradient are known a priori. However, if a radial-convergent test is also performed between two boreholes, the kinematic porosity can be estimated and be used to estimate the seepage velocity from the single-well test results. To apply the generalized equations, the flow dimension and the extent of the flow region must be known. Therefore, the generalized radial flow (GRF) model of Barker (1988; a generalized radial flow model for hydraulic tests in fractured rock. Water Resour Res 24(10):1796–1804) is used to estimate the flow dimension because of its wide range of applications. A pumping test performed on the boreholes will yield an estimate of the fractional-flow dimension by applying the GRF model. Electronic Publication