南亚高压在中南半岛上空建立过程及其与亚洲南部夏季风建立的关系

利用NCEP(National Centers for Environmental Prediction)/NCAR(National Center for Atmospheric Research)再分析资料, 首先讨论了南亚高压在中南半岛上空建立日期的定义标准及其建立过程。结果表明, 南亚高压在中南半岛上空建立的日期平均为4月29日;合成的南亚高压建立前后的大气环流和非绝热加热的演变揭示出南亚高压建立始于菲律宾东南洋面上的反气旋环流分裂后, 西中心在中南半岛上空建立加强形成南亚高压, 该建立过程与中南半岛非绝热加热作用密切相关。在此基础上结合NOAA(National Oceanic and Atmospheric Administration)的对外长波辐射(OLR)资料分析了南亚高压在中南半岛上空的建立与亚洲夏季风建立的关系。结果表明, 中南半岛夏季风建立和南亚高压在半岛上空建立几乎同时发生;南亚高压在中南半岛建立几天后, 东孟加拉湾夏季风开始建立;南亚高压建立大约20天后, 南海和菲律宾夏季风开始建立;大约一个月后, 西孟加拉湾、印度半岛和东阿拉伯海的夏季风建立。南亚高压在中南半岛上空的建立可视为亚洲夏季风建立的开始, 其对亚洲夏季风爆发有很好的指示意义。     

山东半岛冷流强降雪和非冷流强降雪的对比分析

利用1981—2000年常规气象观测和NCEP/NCAR再分析资料,采用合成分析和动力诊断分析方法,对冷流强降雪与非冷流强降雪的空间分布、大气环流、水汽输送、稳定度和垂直运动进行对比分析。结果表明：冷流强降雪是发生在槽后西北气流里的中小尺度不稳定降雪,非冷流强降雪是发生在槽前西南气流中大尺度稳定性降雪。冷流强降雪具有明显的地方性特点,是强冷空气对下垫面物理状态强迫响应的结果。提出强冷空气与渤海暖水面相互作用产生的大气边界层不稳定是产生冷流降雪的本质,在这种边界层不稳定层结中发生的降雪是冷流降雪的概念。     

辽东湾JZ27-33区块伸展型右行走滑双重构造系统

辽东湾JZ27-33区块发育3条大型NNE向走滑断裂,分别为辽中3号断裂(或者辽中1号断裂)、辽中2号断裂和辽东2号断裂,在平面上,3条走滑断裂呈"雁行式"展布,其间密集发育具有走滑性质的正断层,这些正断层在平面上成NE或者NEE走向,与主走滑断裂斜交,其锐角的指向为本盘地层在平面上的位移方向;在横剖面上,负花状构造是研究区内的大型走滑断裂在横剖面上的重要特征,综合分析认为,研究区的断裂特征在平面上表现为"双重构造"特征,在横剖面上表现为(负)花状构造,构成了典型的"伸展型右旋走滑双重构造"系统,并且认为,形成这种构造样式的控制因素主要有:郯庐断裂带的右旋走滑作用、平面展布特征、多期构造活动以及能干性特征明显的沉积地层。     

南极半岛周边海域表层沉积物粒度分布特征及其环境指示意义

基于南极半岛周边海域表层沉积物调查以及收集的资料,并通过分析表层沉积物粒度数据研究沉积物类型和分布特征,探讨沉积物的变化规律。南极半岛周边海域的沉积物类型比较丰富,主要分为四大类:砾质、砂质、粉砂质以及泥质沉积物;根据不同的水深和地貌单元可分为陆架(或岛架)碎屑沉积物、陆坡(或岛坡)沉积物和深海沉积物。研究区沉积物属于冰海沉积物,并可划分为残副冰碛物和混合副冰碛物。沉积物的搬运介质以冰川、冰筏为主,海流对沉积物的影响较为明显,沉积物类型随地形变化而呈有规律的分布。     

Comparison of tide model outputs for the northern region of the Antarctic Peninsula using satellite altimeters and tide gauge data

This study compares the common harmonic constants of the O₁, K₁, P₁, Q₁, M₂, S₂, N₂, and K₂ tidal constituents from eight global and four regional tide models with harmonic constants from satellite altimeter and tide gauge data for the northern region of the Antarctic Peninsula (58°S–66°S, 53°W–66°W). To obtain a more representative comparison, the study area was divided into three zones with different physical characteristics but similar maximum tidal amplitude variations: Zone I (north of 62°S), Zone II (south of 62°S and west of the Antarctic Peninsula), and Zone III (between 62°S and 64.3°S, and east of 58.5°W). Root sum square (RSS) values are less than or equal to 3.0, 4.2, and 8.4 cm for zones I, II, and III, respectively. No single model shows superior performance in all zones. Because there are insufficient satellite altimetry observations in the vicinity of Matienzo Base (64.9761°S, 60.0683°W), this station was analyzed separately and presents the greatest values of both root mean square misfit and RSS. The maximum, minimum, and average amplitude values of the constituents that follow in importance after the eight common tidal constituents, and which have amplitudes greater than 1 cm, are also analyzed.     

Sedimentary evolution of the Holocene subaqueous clinoform off the southern Shandong Peninsula in the Western South Yellow Sea

Based on the stratigraphic sequence formed since the last glaciation and revealed by 3000 km long high-resolution shallow seismic profiles and the core QDZ03 acquired recently off the southern Shandong Peninsula, we addressed the sedimentary characteristics of a Holocene subaqueous clinoform in this paper. Integrated analyses were made on the core QDZ03, including sedimentary facies, sediment grain sizes, clay minerals, geochemistry, micro paleontology, and AMS 14 C dating. The result indicates that there exists a Holocene subaqueous clinoform, whose bottom boundary generally lies at 15–40 m below the present sea level with its depth contours roughly parallel to the coast and getting deeper seawards. The maximum thickness of the clinoform is up to 22.5 m on the coast side, and the thickness contours generally spread in a banded way along the coastline and becomes thinner towards the sea. At the mouths of some bays along the coast, the clinoform stretches in the shape of a fan and its thickness is evidently larger than that of the surrounding sediments. This clinoform came into being in the early Holocene(about 11.2 cal kyr BP) and can be divided into the lower and upper depositional units(DU 2 and DU 1, respectively). The unit DU 2, being usually less than 3 m in thickness and formed under a low sedimentation rate, is located between the bottom boundary and the Holocene maximum flooding surface(MFS), and represents the sediment of a post-glacial transgressive systems tract; whereas the unit DU 1, the main body of the clinoform, sits on the MFS, belonging to the sediment of a highstand systems tract from middle Holocene(about 7–6 cal kyr BP) to the present. The provenance of the clinoform differs from that of the typical sediments of the Yellow River and can be considered as the results of the joint contribution from both the Yellow River and the proximal coastal sediments of the Shandong Peninsula, as evidenced by the sediment geochemistry of the core. As is controlled mainly by coactions of multiple factors such as the Holocene sea-level changes, sediment supplies and coastal dynamic conditions, the development of the clinoform is genetically related with the synchronous clinoform or subaqueous deltas around the northeastern Shandong Peninsula and in the northern South Yellow Sea in the spatial distribution and sediment provenance, as previously reported, with all of them being formed from the initial stage of the Holocene up to the present.     

胶东半岛烟台地区杏山北钼矿床地质特征及其找矿预测

杏山北钼矿床为胶东半岛一典型矽卡岩型钼矿床,位于著名牟平乳山金成矿带和蓬莱栖霞金成矿带之间,区域上位于胶东辽东钼成矿带,具有较好的成矿地质条件。通过对比胶东地区其他典型钼矿床地质特征,认为胶东半岛钼矿床存在两期成矿时代;矽卡岩型矿床主要受近EW向断裂构造控制,斑岩型矿床主要受近EW向与NE向断裂复合构造控制。通过物探异常预测,认为杏山北钼矿床深部是寻找矽卡岩型和斑岩型铜钼矿床的有利部位。     

胶东邢家山钼钨矿床地质特征及成因研究

邢家山大型钼钨矿床位于胶东栖霞-蓬莱-福山金及多金属成矿区东部,矿床主要赋存于晚侏罗世二长花岗岩外接触带的变质地层中,倒转向斜分布区是钼钨成矿有利部位。幸福山岩体为成矿母岩,粉子山群的碳酸盐岩既易交代成矿亦形成了屏蔽层,NW向张扭性断裂导矿,层间裂隙、节理和矿物间隙沉淀成矿。钼钨矿化作用与矽卡岩化、钾化、硅化密切相关,矿床工业类型属矽卡岩型-斑岩型,成因类型属于岩浆期后热液矿床,矿石建造属钨钼建造,该成果对在胶东地区寻找同类型钼矿床具有重要意义。     

THE CHARACTERISTIC AND CAUSE OF SEA WATER INTRUSION AND POLLUTION IN SOUTH LIAODONG PENINSULA

Based on various patterns of groundwater and their abundance characters in south Liaodong Peninsula, the distribution, stage, pattern and characters of sea water intrusion in the serious sea water intrusion areas are analysed. The reasons to cause sea water intrusion are uneven precipitation, limited recharge of surface water, artificial overpumping, lithology and geological structure. It can provide scientific basis for reasonable utilization of limited water resource in line with the local conditions.