Effects of peat on the shapes of alluvial channels: examples from the Cumberland Marshes, Saskatchewan, Canada

An avulsion of the lower Saskatchewan River in the 1870s inundated a large segment of peat-covered floodplain that subsequently has become aggraded with a broad (500 km²) belt of alluvium deposited by the redirected flow. Routing of water and sediment discharge through the avulsion-affected area has been accomplished mainly by networks of sandy bedded anastomosed channels that have formed, evolved, and abandoned as the alluvial belt prograded down the floodplain slope. These processes continue today, though at a much-reduced rate. New channels, formed by crevassing and basinward extension of distributaries, are initially small and shallow, with bottom elevations situated within the avulsive alluvium but above the pre-avulsion peat (floodplain) surface. Subsequent enlargement and downcutting of many of these channels eventually uncovers the underlying peat layer whose resistance to erosion exerts significant influence on cross-sectional shape and further channel development. Peat-floored channels tend to have rectangular cross-sections, high ratios of average to maximum depth (D/D_max), and a large range of width-to-depth ratios. If the channel continues to enlarge, the peat layer eventually becomes breached, commonly leading to temporarily irregular cross-sections caused by localized scouring at the breach sites. Eventually, the peat layer is completely eroded from the channel floor by undercutting and slumping, after which channel shape becomes governed mainly by other perimeter characteristics. Channels unaffected by peat, either before the peat layer is encountered during early channel development or after it is entirely removed, tend to have low width/depth ratios and a large range of D/D_max values.     

Anabranching in mixed bedrock-alluvial rivers: the example of the Orange River above Augrabies Falls, Northern Cape Province, South Africa

Anabranching is characteristic of a number of rivers in diverse environmental settings worldwide, but has only infrequently been described from bedrock-influenced rivers. A prime example of a mixed bedrock-alluvial anabranching river is provided by a 150-km long reach of the Orange River above Augrabies Falls, Northern Cape Province, South Africa. Here, the perennial Orange flows through arid terrain consisting mainly of Precambrian granites and gneisses, and the river has preferentially eroded bedrock joints, fractures and foliations to form multiple channels which divide around numerous, large (up to 15 km long and 2 km wide), stable islands formed of alluvium and/or bedrock. Significant local variations in channel-bed gradient occur along the river, which strongly control anabranching style through an influence on local sediment budgets. In relatively long (>10 km), lower gradient reaches (<0.0013) within the anabranching reach, sediment supply exceeds local transport capacity, bedrock usually only crops out in channel beds, and channels divide around alluvial islands which are formed by accretion in the lee of bedrock outcrop or at the junction with ephemeral tributaries. Riparian vegetation probably plays a key role in the survival and growth of these islands by increasing flow roughness, inducing deposition, and stabilising the sediments. Less commonly, channels may form by eroding into once-continuous island or floodplain surfaces. In shorter (<10 km), higher gradient reaches (>0.0013) within the anabranching reach, local transport capacity exceeds sediment supply, bedrock crops out extensively, and channels flow over an irregular bedrock pavement or divide around rocky islands. Channel incision into bedrock probably occurs mainly by abrasion, with the general absence of boulder bedforms suggesting that hydraulic plucking is relatively unimportant in this setting. Mixed bedrock-alluvial anabranching also occurs in a number of other rivers worldwide, and appears to be a stable and often long-lived river pattern adjusted to a number of factors commonly acting in combination: (1) jointed/fractured granitoid rock outcrop; (2) erosion-resistant banks and islands; (3) locally variable channel-bed gradients; (4) variable flow regimes.     

Age and significance of core complex formation in a very curved orogen: Evidence from fission track studies in the South Carpathians (Romania)

Twenty-four new zircon and apatite fission track ages from the Getic and Danubian nappes in the South Carpathians are discussed in the light of a compilation of published fission track data. A total of 101 fission track ages indicates that the Getic nappes are generally characterized by Cretaceous zircon and apatite fission track ages, indicating cooling to near-surface temperatures of these units immediately following Late Cretaceous orogeny.The age distribution of the Danubian nappes, presently outcropping in the Danubian window below the Getic nappes, depends on the position with respect to the Cerna-Jiu fault. Eocene and Oligocene zircon and apatite central ages from the part of the Danubian core complex situated southeast of this fault monitor mid-Tertiary tectonic exhumation in the footwall of the Getic detachment, while zircon fission track data from northwest of this fault indicate that slow cooling started during the Latest Cretaceous. The change from extension (Getic detachment) to strike-slip dominated tectonics along the curved Cerna-Jiu fault allowed for further exhumation on the concave side of this strike-slip fault, while exhumation ceased on the convex side. The available fission track data consistently indicate that the change to fast cooling associated with tectonic denudation by core complex formation did not occur before Late Eocene times, i.e. long after the cessation of Late Cretaceous thrusting.Core complex formation in the Danubian window is related to a larger-scale scenario that is characterized by the NNW-directed translation, followed by a 90° clockwise rotation of the Tisza-Dacia “block” due to roll-back of the Carpathian embayment. This led to a complex pattern of strain partitioning within the Tisza-Dacia “block” adjacent to the western tip of the rigid Moesian platform. Our results suggest that the invasion of these southernmost parts of Tisza-Dacia started before the Late Eocene, i.e. significantly before the onset of Miocene-age rollback and associated extension in the Pannonian basin.     

Structural properties of (Mn1-x Fe x )Nb2O6 columbites from X-ray diffraction and IR spectroscopy

A suite of (Mn_1-x Fe _x )Nb₂O₆ (x=0, 0.05, 0.25, 0.50, 0.75, 1) columbite samples has been prepared by solid-state reaction from oxides. X-ray diffraction and spectroscopic investigations have been carried out in order to gain different perspectives on how the solid solution adapts at different length scales to cation mixing. X-ray powder diffraction and powder absorption IR spectroscopy data are presented. The powder diffraction data show that there is no significant excess volume of mixing on the Fe–Mn columbite join. All the unit-cell parameters decrease linearly as a function of increasing Fe content. Substitution of Fe²⁺ for the larger Mn²⁺ cation causes a decrease in the volume of the A polyhedron, which also becomes more regular with respect to both bond-length and edge-length distortion parameters. No significant variation of the B site has been observed. Wavenumber shifts of the IR peaks nearly all vary linearly with composition, consistent with linear variations of the lattice parameters. Line broadening has been quantified by autocorrelation analysis of the IR spectra. This is interpreted as suggesting that there is some element of local strain or positional disorder at the length scale of second or third nearest neighbours around sites occupied by Fe.     

Impact of human activity on the estuary of the Qiantang River and the reclamation of tidal flats and river regulation

The swing of the main channel of the Qiantang River is controlled by the high-water and low-water changes in the river, as well as the impact of large-scale reclamation of tidal flats. Its evolution in modern times is the result of the combined functions of natural and man-made factors. This paper analyzes the cause of the formation of the South Channel and Xisan Tidal Furrow and proposes the regulation principle of “To regulate the river and reclaim tidal flats by taking the advantage of local topography”. It is suggested to cut off the South Channel and Xisan Tidal Furrow completely to restrict the swing of the main channel and to increase the reclamation area of the tidal flat at the same time.     

Rb2Ca[B4O5(OH)4]2·8H2O溶解及相转化过程的研究

利用IR光谱和Raman光谱等实验手段,对25℃时Rb2Ca[B4O5(OH)4]2·8H2O的溶解及相转化过程进行了初步探索,结果表明,Rb2Ca[B4O5(OH)4]2·8H2O溶于水后,硼在溶液中主要以B(OH)3和[B(OH)4]-的形式存在,残留固相由开始的无定形水合三硼酸钙,最终部分转变为Ca2[B3O3(OH)5]2·8H2O晶体。     

Flow processes and sedimentation in unidirectionally migrating deep‐water channels: From a three‐dimensional seismic perspective

Three‐dimensional seismic data were used to infer how bottom currents control unidirectional channel migration. Bottom currents flowing towards the steep bank would deflect the upper part of sediment gravity flows at an orientation of 1° to 11° to the steep bank, yielding a helical flow circulation consisting of a faster near‐surface flow towards the steep bank and a slower basal return flow towards the gentle bank. This helical flow model is evidenced by the occurrence of bigger, muddier (suggested by low‐amplitude seismic reflections) lateral accretion deposits and gentle channel wall with downlap terminations on the gentle bank and by smaller, sandier (indicated by high‐amplitude seismic reflectors) channel fills and steep channel walls with truncation terminations on the steep bank. This helical flow circulation promotes asymmetrical depositional patterns with dipping accretion sets restricted to the gentle bank, which restricts the development of sinuosity and yields unidirectional channel migration. These results aid in obtaining a complete picture of flow processes and sedimentation in submarine channels.     

塔里木盆地西部阿克莫木气藏地层压力特征

阿克莫木气田目前已有多口井完钻,各井在钻揭白垩系砂岩储层前,对地层压力纵向上的变化规律认识不清,在什么层位及深度下7″套管意见仍不统一。本文根据目前研究现状和生产面临问题,对白垩系各组地层分布规律、压力特征进行了详细研究,认为白垩系克孜勒苏群、库克拜组分布稳定,压力窗口相近,白垩系东巴组与上覆古近系阿尔塔什组压力窗口相近。建议今后该区钻探7″套管应下至库克拜组顶部-东巴组底部,减少地层漏失和油气勘探风险。     

Remote sensing and information value (IV) model for regional mapping of fluvial channels and topographic wetness in the Saudi Arabia

This study aims to map regions of near surface fluvial channels, mega-basins and topographic wetness in Saudi Arabia using remote sensing data and an information value (IV) model, which is a modified approach of weight of evidence. We used the new version of the Shuttle Radar Topographic Mission (SRTM) to delineate the fluvial channels, mega-basin, and slope. These hydrological parameters were used to index the topographic wetness of each mega-basin in the region based on IV in a Geographic Information System. We validated our method using the Space Imaging Radar-C and Landsat 8 images and compared the textural features (fluvial channels) evident from SRTM digital elevation model and to determine whether these patterns were different. Our results revealed that the region is drained by nine tributaries and that the Err Rub Al Khali and Sahba mega-basins have the highest value of the IV and topographic wetness values; the Arran and coastal mega-basins have the lowest value of the IV and topographic wetness values. An integrated approach is timely and economically effective and can be applied throughout the arid and semi-arid regions to help hydrologists and urban developers.     

Interactive discovery of sequential patterns in time series of wind data

Wind speed and direction vary over space and time due to the interactions between different pressures and temperature gradients within the atmospheric layers. Near the earth’s surface, these interactions are modulated by topography and artificial structures. Hence, characterizing wind behaviour over large areas and long periods is a complex but essential task for various energy-related applications. In this study, we present a novel approach to discover wind patterns by integrating sequential pattern mining and interactive visualization techniques. The approach relies on the use of the Linear time Closed pattern Miner sequence algorithm in conjunction with a time sliding window that allows the discovery of all sequential patterns present in the data. These patterns are then visualized using integrated 2D and 3D coordinated multiple views and visually explored to gain insight into the characteristics of the wind from a spatial, temporal and attribute (type of wind pattern) point of view. This proposed approach is used to analyse 10 years of hourly wind speed and direction data for 29 weather stations in the Netherlands. The results show that there are 15 main sequential patterns in the data. The spatial task shows that weather stations located in the same region do not necessarily experience similar wind pattern. For within the selected time interval, similar wind patterns can be observed in different stations and in the same station at different times of occurrence. The attribute task discovered that the repetitive occurrences of chosen pattern indicate as regular wind behaviour at different weather stations that persisted continuously over time. The results of these tasks show that the proposed interactive discovery facilitates the understanding of wind dynamics in space and time.