汶川大地震（MS 8.0）同震变形作用及其与地质灾害的关系

2008年5月12日发生于四川盆地西部龙门山断裂带的汶川大地震（MS 8.0）波及半个亚洲,震撼整个中国。本文通过地震后的实地调查,对发育在龙门山断裂带上的同震地表破裂带的分布、产状、继承性复活与变形特征,以及同震变形与地震地质灾害的关系等进行了初步总结,分析表明这次汶川大地震(MS 8.0)沿北川-映秀逆冲断裂和安县-灌县逆冲断裂同时发生地表破裂,前者产生以高角度逆冲兼右旋走滑为特征的地表破裂带长约275 km,后者产生以缓倾角逆冲作用为特征的地表破裂带长约80 km。汶川大地震的同震地表破裂带分布具有分段性特征,并与地表破坏程度的分带性有着一定的内在联系,详细研究表明,同震地表破裂带的产状直接影响地表破坏程度和地震地质灾害的强度,汶川大地震（MS 8.0）沿呈高角度陡倾的北川-映秀逆冲断裂发育的同震地表变形所产生的地表破坏程度和地震地质灾害的强度比沿缓倾角的安县-灌县逆冲断裂要强。从各种类型的地震断裂来看,具有垂直运动的逆冲型地震断裂所造成的地表破坏程度和地质灾害强度比具水平运动的走滑型地震断裂要强。因此,汶川大地震发生的破裂过程和同震地表变形与地震地质灾害的关系值得深入研究。     

The double solid reactant method: II. An application to the shallow groundwaters of the Porto Plain,Vulcano Island (Italy)

This paper presents an example of application of the double solid reactant method (DSRM) of Accornero and Marini (Environmental Geology, 2007a), an effective way for modeling the fate of several dissolved trace elements during water–rock interaction. The EQ3/6 software package was used for simulating the irreversible water–rock mass transfer accompanying the generation of the groundwaters of the Porto Plain shallow aquifer, starting from a degassed diluted crateric steam condensate. Reaction path modeling was performed in reaction progress mode and under closed-system conditions. The simulations assumed: (1) bulk dissolution (i.e., without any constraint on the kinetics of dissolution/precipitation reactions) of a single solid phase, a leucite-latitic glass, and (2) precipitation of amorphous silica, barite, alunite, jarosite, anhydrite, kaolinite, a solid mixture of smectites, fluorite, a solid mixture of hydroxides, illite-K, a solid mixture of saponites, a solid mixture of trigonal carbonates and a solid mixture of orthorhombic carbonates. Analytical concentrations of major chemical elements and several trace elements (Cr, Mn, Fe, Ni, Cu, Zn, As, Sr and Ba) in groundwaters were satisfactorily reproduced. In addition to these simulations, similar runs for a rhyolite, a latite and a trachyte permitted to calculate major oxide contents for the authigenic paragenesis which are comparable, to a first approximation, with the corresponding data measured for local altered rocks belonging to the silicic, advanced argillic and intermediate argillic alteration facies. The important role played by both the solid mixture of trigonal carbonates as sequestrator of Mn, Zn, Cu and Ni and the solid mixture of orthorhombic carbonates as scavenger of Sr and Ba is emphasized.

Seismic Hazard Analysis — Quo vadis?

The paper is dedicated to the review of methods of seismic hazard analysis currently in use, analyzing the strengths and weaknesses of different approaches. The review is performed from the perspective of a user of the results of seismic hazard analysis for different applications such as the design of critical and general (non-critical) civil infrastructures, technical and financial risk analysis. A set of criteria is developed for and applied to an objective assessment of the capabilities of different analysis methods. It is demonstrated that traditional probabilistic seismic hazard analysis (PSHA) methods have significant deficiencies, thus limiting their practical applications. These deficiencies have their roots in the use of inadequate probabilistic models and insufficient understanding of modern concepts of risk analysis, as have been revealed in some recent large scale studies. These deficiencies result in the lack of ability of a correct treatment of dependencies between physical parameters and finally, in an incorrect treatment of uncertainties. As a consequence, results of PSHA studies have been found to be unrealistic in comparison with empirical information from the real world. The attempt to compensate these problems by a systematic use of expert elicitation has, so far, not resulted in any improvement of the situation. It is also shown that scenario-earthquakes developed by disaggregation from the results of a traditional PSHA may not be conservative with respect to energy conservation and should not be used for the design of critical infrastructures without validation. Because the assessment of technical as well as of financial risks associated with potential damages of earthquakes need a risk analysis, current method is based on a probabilistic approach with its unsolved deficiencies.

Traditional deterministic or scenario-based seismic hazard analysis methods provide a reliable and in general robust design basis for applications such as the design of critical infrastructures, especially with systematic sensitivity analyses based on validated phenomenological models. Deterministic seismic hazard analysis incorporates uncertainties in the safety factors. These factors are derived from experience as well as from expert judgment. Deterministic methods associated with high safety factors may lead to too conservative results, especially if applied for generally short-lived civil structures. Scenarios used in deterministic seismic hazard analysis have a clear physical basis. They are related to seismic sources discovered by geological, geomorphologic, geodetic and seismological investigations or derived from historical references. Scenario-based methods can be expanded for risk analysis applications with an extended data analysis providing the frequency of seismic events. Such an extension provides a better informed risk model that is suitable for risk-informed decision making.     

Assessing soil erosion in Mediterranean karst landscapes of Lebanon using remote sensing and GIS

Maps showing the potential for soil erosion at 1:100,000 scale are produced in a study area within Lebanon that can be used for evaluating erosion of Mediterranean karstic terrain with two different sets of impact factors built into an erosion model. The first set of factors is: soil erodibility, morphology, land cover/use and rainfall erosivity. The second is obtained by the first adding a fifth factor, rock infiltration. High infiltration can reflect high recharge, therefore decreasing the potential of surface runoff and hence the quantity of transported materials. Infiltration is derived as a function of lithology, lineament density, karstification and drainage density, all of which can be easily extracted from satellite imagery. The influence of these factors is assessed by a weight/rate approach sharing similarities between quantitative and qualitative methods and depending on pair-wise comparison matrix.The main outcome was the production of factorial maps and erosion susceptibility maps (scale 1:100,000). Spatial and attribute comparison of erosion maps indicates that the model that includes a measure of rock infiltration better represents erosion potential. Field investigation of rills and gullies shows 87.5% precision of the model with rock infiltration. This is 17.5% greater than the precision of the model without rock infiltration. These results indicate the necessity and importance of integrating information on infiltration of rock outcrops to assess soil erosion in Mediterranean karst landscapes.     

Exurbia from the bottom-up: Confronting empirical challenges to characterizing a complex system

We describe empirical results from a multi-disciplinary project that support modeling complex processes of land-use and land-cover change in exurban parts of Southeastern Michigan. Based on two different conceptual models, one describing the evolution of urban form as a consequence of residential preferences and the other describing land-cover changes in an exurban township as a consequence of residential preferences, local policies, and a diversity of development types, we describe a variety of empirical data collected to support the mechanisms that we encoded in computational agent-based models. We used multiple methods, including social surveys, remote sensing, and statistical analysis of spatial data, to collect data that could be used to validate the structure of our models, calibrate their specific parameters, and evaluate their output. The data were used to investigate this system in the context of several themes from complexity science, including have (a) macro-level patterns; (b) autonomous decision making entities (i.e., agents); (c) heterogeneity among those entities; (d) social and spatial interactions that operate across multiple scales and (e) nonlinear feedback mechanisms. The results point to the importance of collecting data on agents and their interactions when producing agent-based models, the general validity of our conceptual models, and some changes that we needed to make to these models following data analysis. The calibrated models have been and are being used to evaluate landscape dynamics and the effects of various policy interventions on urban land-cover patterns.     

运用3DEEMs及荧光偏振方法研究pH、离子强度及浓度效应对腐殖酸荧光光谱特性的影响

利用三维荧光激发.发射光谱(3DEEMs)及荧光偏振法研究了3例腐殖酸和1例湖泊溶解有机物(DOM)在不同腐殖酸浓度、离子强度和pH条件下的荧光光谱特性.实验结果表明,随着浓度增大,各腐殖酸样的荧光强度增大,其中垃圾渗滤液腐殖酸和Pahokee泥炭腐殖酸的荧光峰出现红移.随着浓度进一步增大,腐殖酸的荧光偏振值增大,由此推断在此浓度范围内腐殖酸由于分子间的排斥作用使其构型出现伸展.离子强度增大导致腐殖酸及阿哈湖DOM的荧光强度降低.随着氯化钾(KCI)浓度增大,Fluka腐殖酸的荧光峰A蓝移,荧光峰B的荧光偏振值出现减小,推测是由于静电中和作用使其荧光基团发生卷曲造成的.离子强度对其余腐殖酸样和阿哈湖DOM的其他荧光特性没有明显的影响.总的来说,pH值的变化对腐殖酸和湖泊DOM的荧光特征的影响是很明显的.随着pH值增大,腐殖酸和湖泊DOM的荧光强度增强.而pH值减小时,Fluka腐殖酸和Pahokee泥炭腐殖酸的荧光峰(A峰)蓝移,当pH值降到5时,Fhka腐殖酸的荧光峰突然红移到最大,随后又继续蓝移;垃圾渗滤液腐殖酸和阿哈湖DOM的荧光峰位无明显的漂移.所有样品的荧光偏振值都减小(但阿哈湖DOM的A峰变化不大),但在pHi≤5时又增大,这种现象表明随着pH值降低,腐殖酸和湖泊DOM中有机大分子发生卷曲,但在pH≤5时由于羧基的质子化又以平面伸展构型出现在溶液中.     

金川镍铜矿床数学模型对深部矿化变化趋势的指示

按矿化特征将金川X矿区主矿体分为致密块状特富矿、海绵状富矿和浸染状贫矿.应用MicroMine软件对3类矿化体分别建立了数学模型,并应用距离平方反比法对模型单元块进行了镍、铜品位估值.通过分析和对比矿床数学模型900m至1300m不同水平剖面上的Ni、Cu品位及Ni/Cu比值的变化,得出在X矿区的中部西侧是一个Ni和Cu的矿化中心,并且向深部Cu的矿化强度高于Ni.     

Detection of free vertical convection and double-diffusion in groundwater monitoring wells with geophysical borehole measurements

Two algorithms for in-situ detection and identification of vertical free convective and double-diffusive flows in groundwater monitoring wells or boreholes are proposed. With one algorithm the causes (driving forces) and with the other one the effects (convection or double-diffusion) of vertical transport processes can be detected based on geophysical borehole measurements in the water column. Five density-driven flow processes are identified: thermal, solutal, and thermosolutal convection leading to an equalization, as well as saltfingers and diffusive layering leading to an intensification of a vertical density gradient. The occurrence of density-driven transport processes could be proven in many groundwater monitoring wells and boreholes; especially shallow sections of boreholes or groundwater monitoring wells are affected dramatically by such vertical flows. Deep sections are also impaired as the critical threshold for the onset of a density-driven flow is considerably low. In monitoring wells or boreholes, several sections with different types of density-driven vertical flows may exist at the same time. Results from experimental investigations in a medium-scale testing facility with high aspect ratio (height/radius = 19) and from numerical modeling of a water column agree well with paramters of in-situ detected convection cells.     

TBM在不良地质洞条件下的施工技术

TBM掘进机以其快速、高效、安全、优质等优点越来越广泛地被应用于隧洞开挖施工中,尤其更适用于深埋超长隧洞,然而在不良地质洞段中TBM掘进缓慢,甚至有卡刀可能,反而不如钻爆法灵活,这就需要根据围岩性状采取特殊技术处理措施,辅以监控量测手段对支护方案进行验证、调整支护措施、修正设计参数等。结合辽宁大伙房输水隧洞工程,总结了在不良地质洞条件下的超前地质预报方法、不良地质段处理措施以及围岩变形监测方法。     

滑坡体三维地质建模与可视化分析

针对滑坡地质研究的自身特点,提出了面向滑坡地质体三维建模的NURBS-BRep混合数据结构和地质结构单元实体构造技术.通过对滑坡基础地质数据的预处理、滑坡数字地形和滑动面的三维建模、地质结构面的系统构造、地质结构体的生成和显示,形成了一套完整的滑坡三维地质模型的构建方法.将该方法应用于某水库滑坡,建立了相应的三维滑坡地质模型,并基于此模型进行了三维剖切分析、数字钻孔、等值线生成、滑块自动剖分、滑坡失稳可视化动态模拟和滑坡体方量精确计算等一系列实用的可视化分析,为滑坡稳定性的准确计算和客观评价提供了有力的支持.