Optimum multiple tuned mass dampers for structures under the ground acceleration based on the uniform distribution of system parameters

The five MTMD models, with natural frequencies being uniformly distributed around their mean frequency, have been recently presented by the first author. They are shown to have the near‐zero optimum average damping ratio (more precisely, for a given mass ratio there is an upper limit on the total number, beyond which the near‐zero optimum average damping ratio occurs). In this paper, the eight new MTMD models (i.e. the UM‐MTMD1～UM‐MTMD3, US‐MTMD1～US‐MTMD3, UD‐MTMD1 and UD‐MTMD2), with the system parameters (mass, stiffness and damping coefficient) being, respectively, uniformly distributed around their average values, have been, for the first time here, proposed to seek for the MTMD models without the near‐zero optimum average damping ratio. The structure is represented by the mode‐generalized system corresponding to the specific vibration mode that needs to be controlled. Through minimization of the minimum values of the maximum dynamic magnification factors (DMF) of the structure with the eight MTMD models (i.e. through the implementation of Min.Min.Max.DMF), the optimum parameters and values of Min.Min.Max.DMF for these eight MTMD models are investigated to evaluate and compare their control performance. The optimum parameters include the optimum mass spacing, stiffness spacing, damping coefficient spacing, frequency spacing, average damping ratio and tuning frequency ratio. The six MTMD models without the near‐zero optimum average damping ratio (i.e. the UM‐MTMD1～UM‐MTMD3, US‐MTMD1, US‐MTMD2 and UD‐MTMD2) are found through extensive numerical analyses. Likewise, the optimum UM‐MTMD3 offers the higher effectiveness and robustness and requires the smaller damping with respect to the rest of the MTMD models in reducing the responses of structures subjected to earthquakes. Additionally, it is interesting to note, by comparing the optimum UM‐MTMD3 with the optimum MTMD‐1 recently investigated by the first author, that the effectiveness and robustness for the optimum UM‐MTMD3 is almost identical to that for the optimum MTMD‐1 (without inclusion of the optimum MTMD‐1 with the near‐zero optimum average damping ratio). Recognizing these performance benefits, it is preferable to employ the optimum UM‐MTMD3 or the optimum MTMD‐1 without the near‐zero optimum average damping ratio, when installing the MTMD for the suppression of undesirable oscillations of structures under earthquakes. Copyright © 2003 John Wiley & Sons, Ltd.     

压裂井经济分析的优化方法

水力压裂是油气井增产的一项重要技术措施。压裂效果的经济评价，实际上是一个压裂设计的优化过程。研究经济问题即为研究压裂优化问题。提出了压裂井的施工费用计算方法和贴现率、净收入、净现值的计算公式，并对压裂井进行了经济分析，给出了压裂设计优化的步骤。建立了八屋—后五家户气田压裂经济评价模型，并应用到实际施工现场。使油气单井产量比过去增加2～3倍。     

多因素复杂系统最佳因素权重确定的一种新思路——以深港西部通道工程深圳湾公路大桥为例

为了客观地反映各因素对目标问题的影响程度,本文首次提出了最佳因素权重概念。定义最佳因素权重为研究区域内系统质量处于极限状态时的各因素权重之组合。结合深港西部通道工程深圳湾公路大桥桥址比选方案,详细说明了本方法的研究思路及其确定方法。通过最佳因素权重方法,能客观地、定量地确定出多因素复杂系统中的最优场址。     

Adaptive Multiscale Permeability Estimation

With multiscale permeability estimation one does not select parameterization prior to the estimation. Instead, one performs a hierarchical search for the right parameterization while solving a sequence of estimation problems with an increasing parameterization dimension. In some previous works on the subject, the same refinement is applied all over the porous medium. This may lead to over-parameterization, and subsequently, to unrealistic permeability estimates and excessive computational work. With adaptive multiscale permeability estimation, the new parameterization at an arbitrary stage in the estimation sequence is such that new degrees of freedom are not necessarily introduced all over the porous medium. The aim is to introduce new degrees of freedom only where it is warranted by the data. In this paper, we introduce a novel adaptive multiscale estimation. The approach is used to estimate absolute permeability from two-phase pressure data in several numerical examples.     

多元判据综合评估中期天气客观相似预报模式

提出一个对多元判据综合评估的中期天气客观相似预报模式。模式应用同中期天气过程的时间—空间尺度相适应的经过时间滤波的大气环流背景为客观判据，比较全面地评估了预报时刻前后多层次、多要素的大气环流动态变化的相似，通过定义相似指数综合评估在多元判据下样本的相似程度，从相似时域的历史样本中找到较佳相似的中期过程，预测未来l～10天的中期天气过程。模式检验和预报试验表明该模式具有预报技巧。     

城市地价动态监测点设置的Voronoi方法

依据国家建设城市地价动态监测体系的要求，以济南市地价监测点的布设为数据基础，分析了利用一般方法布设地价监测点存在的问题，试验了利用Voronoi方法对其进行优化的算法思路，利用Voronoi方法对城市地价监测点布设的技术路线及其可行性进行了分析。     

黑龙江省中尺度数值预报业务系统

黑龙江省气象台于2001年8月引进了MM5模式，并结合业务和服务的实际需要对其有关参数进行了确定，建立了黑龙江省中尺度数值预报业务系统。已经在黑龙江省气象台实时运行，并应用到短期预报的业务工作中。系统运行稳定，预报结果有一定的参考价值。     

对波达波夫和Pride震电波方程组的对比分析

用Biot介质参数说明了波达波夫震电波方程组中弹性动力学 参数的含义，解释了第一类和第二类震电效应的意义，在忽略第一类震电效应条件下将该方 程组与Pride方程组进行比较，说明了二者在描述第二类震电效应方面的异同点. 同时指出 ：波达波夫方程组忽略了流体与固体的耦合质量；方程中的黏性耗散项丢掉了一个孔隙度因 子，依据该方程组计算出的弹性波和转换电场的幅度将偏大；边界条件之一存在错误，会影 响对波在界面上的反射透射规律的描述.     

成像光谱仪影像的几种处理方法

针对成像光谱仪影像的专题分析，介绍了沿用常规遥感影像分析方法时的原理和新的算法，提出了影像融合方法的应用，说明了这些方法在学术思想上的归属，并简要介绍了各种方法的实验效果。     

1996年阿图什6.9级地震参数与宏观震中

对通过计算机定位得到１９９６年３月１９日阿图什６．９级地震基本参数的可靠性进行了分析与论证，并对该次地震微观震中与宏观震中差异较大的原因进行了探讨。