基于改进层次分析法的雷电防护能力模糊综合评价

为科学评价雷电防护措施的防护能力,分析国内外多种评价方法的优劣,结合雷电防护措施的特点提出基于改进层次分析法的模糊综合评价。依据雷电防护相关技术标准和规范,综合考虑雷电环境、承载体特征、自然因素的影响,建立雷电防护能力评价指标体系。利用改进层次分析法计算各级指标的权重,采用模糊综合评价法确定雷电防护能力评价等级。运用此方法对采取多种雷电防护措施的油气集输站进行雷电防护能力评价,评价等级与实际情况和有关文献案例相符,表明该方法适用于雷电防护能力的评价。     

Direct Trace Element Determination in Oil and Gas Produced Waters with Inductively Coupled Plasma‐Optical Emission Spectrometry: Advantages of High‐Salinity Tolerance

Waters co‐produced during petroleum extraction are the largest waste streams from oil and gas development. Reuse or disposal of these waters is difficult due to their high salinities and the sheer volumes generated. Produced waters (PWs) may also contain valuable mineral commodities. While an understanding of produced water trace element composition is required for evaluating the associated resource and waste potential of these materials, measuring trace elements in brines is challenging due to the dilution requirements of typical methods. Alternatively, inductively coupled plasma‐optical emission spectrometry (ICP‐OES) has shown promise as being capable of direct measurements of trace elements within PWs with minimal dilution. Here, we evaluate direct ICP‐OES trace element quantification in PWs for seventeen trace elements (As, Al, Ba, Be, Cd, Cr, Co, Cu, Hg, Mo, Ni, Pb, Rb, Sb, U, V and Zn) within fifteen PWs from five U.S. continuous reservoirs. The total analytical uncertainties associated with the trace element levels determined using ICP‐OES were estimated to be better than ± 30% (2s) except for Rb, which could not be determined due to ionisation interferences. The ICP‐OES results are compared with trace element levels determined using inductively coupled plasma‐mass spectrometry from the same samples. Our results demonstrate the potential for direct analysis of high‐salinity waters using ICP‐OES with minimal dilution and provide trace element concentrations in waters from several important U.S. petroleum‐generating reservoirs where available data are sparse.     

机载POS的航空影像自动校正的方法与实现

针对每次航空摄影有大批量的影像需要进行几何校正处理,分析了正射纠正算法的全过程,提出利用索引矩阵来进行图像整体运算,利用航空相机的内方位元素和POS系统所提供的外方位元素,用IDL编程开发了航空影像的全自动批处理正射校正的软件,并对其处理结果与ERDAS9.1的LPS所做出来的正射影像图进行比较。     

Flexibility-based linear dynamic analysis of complex structures with curved-3D members

A flexibility-based formulation of a new mass matrix for the dynamic analysis of spatial frames consisting of curved elements with variable cross-sections is presented. The main characteristic of such formulations is the exact equilibrium of forces at any interior point, with no additional hypotheses about the distribution of displacements, strains or stresses. Accordingly, the derived element mass matrix takes into account the exact stiffness and mass distribution throughout each element. In validation tests, results obtained with this method are compared with those obtained by other numerical or analytical formulations, showing the accuracy of the proposed method. The comparison of experimental results for a multispan arch bridge subjected to a dynamic load with those achieved by means of the proposed method are finally included to illustrate its efficiency in the treatment of complex structures. © 1998 John Wiley & Sons, Ltd.     

土壤中铁元素对铬元素p-XRF测定准确度的影响与校正

便携式X射线荧光光谱仪（p-XRF）能够快速检测土壤中的铬元素,但由于土壤成分复杂、基体效应不明,导致其检测准确度较低。铁元素作为土壤基体中的主量元素,在不同类型土壤中含量变化范围大,是影响铬元素p-XRF测定准确度的主要元素之一,深入研究铁元素对铬元素荧光强度的影响有助于提高p-XRF测定土壤中铬元素的准确度。本文以人工配置的铬-铁土壤样品研究铬元素荧光强度与铬元素含量和铁元素含量的变化关系,采用经验公式校正铁元素对铬元素p-XRF分析准确度的影响。结果表明：土壤样品中的铁元素含量固定不变时,铬元素的含量与其相应的特征X射线荧光强度呈线性变化,相关系数均在0.9990以上,且铬元素荧光强度的增长速率随着土壤中铁元素含量的增加而增大;另外通过对同一铬含量、不同铁含量土壤样品的研究,验证了铁元素对铬元素的荧光增强效应,并发现该增强效应还与铁、铬元素的相互作用有关。结合铬、铁元素基体效应研究结果,本文建立了铁元素对铬元素p-XRF测定的校正方程式,相比于普通的线性回归,该方法的相关系数从0.9011提高到了0.9986,硅藻土样品的p-XRF分析平均相对误差从21.94%下降至2.52%,实际土壤样品的p-XRF分析平均相对误差从51.02%下降至5.21%。     

一种线状对象空间自相关测度算法

从线状对象的定性属性数据特点出发,提出了一种表达线状对象定性属性数据空间自相关的算法,构建了适合定性属性数据相似度表达的属性矩阵,提出了全局自相关系数、局部自相关系数的测度表达,并验证了算法的有效性。     

罗德里格矩阵在坐标系转换中的应用

在大旋转角度的坐标系转换中,线性转换模型的旋转参数线性化复杂,计算量大,误差大。根据反对称矩阵和罗德里格矩阵的性质,推导了基于罗德里格矩阵的坐标系转换模型。该模型用反对称矩阵中的3个独立参数代替旋转矩阵中9个相关参数,避免了旋转参数的线性化。模型简单、计算简便,通过实验计算,精度较高。     

基于小波高精度点匹配的基本矩阵估计

利用2视图进行景物的3维重构中,基本矩阵的估计是一个非常重要的问题。目前无论是线性算法还是非线性算法,在估计基本矩阵时都不太理想。这里采用图像的Harries角点作为端点,经过基于小波变换的子线段匹配方法获得高精度的匹配点对;在此基础上,进一步采用Hartley提出的改进八点算法获得了高精度的基本矩阵。通过真实图像的对比实验证明,该方法能有效地提高景物3维重构中基本矩阵估计精度。     

孕镶金刚石复合材料用纳米级胎体粉末的脉冲电流烧结试验

为降低孕镶金刚石复合材料的烧结温度,采用脉冲电流烧结法,对纳米Cu粉末、纳米WC-12％Co粉末及常规的63^#配方胎体进行了烧结实验。结果表明,纳米Cu粉在700℃可实现致密化,纳米WC-12％Co粉末、63^#配方胎体可分别在1100℃、850℃实现致密化,均大大低于常规烧结方法的烧结温度,还起到保护金刚石、降低能耗、增加石墨模具寿命的作用。     

多层建筑抗震分析用的两个计算机程序

提供两个高效而实用的FORTRAN程序（例行子程序形式）,用于对称三对角矩阵的两个计算问题（其一是线性代数方程组的求解,其二是广义特征值问题的计算）。在工程应用中,它们可用于多层建筑的振动特性分析、反应谱法地震变形计算、Pushover静力推覆分析和时程法地震反应分析等问题中。