Design Earthquakes in the U.K.

Three sites in the UK are taken, representative of low, medium and high hazard levels (by UK standards). For each site, the hazard value at 10⁻⁴ annual probability is computed using a generic seismic source model, and a variety of ground motion parameters: peak ground acceleration (PGA), spectral acceleration at 10 Hz and 1 Hz, and intensity. Disaggregation is used to determine the nature of the earthquakes most likely to generate these hazard values. It is found (as might be expected) that the populations are quite different according to which ground motion parameter is used. When PGA is used, the result is a rather flat magnitude distribution with a tendency to low magnitude events (\le 4.5 ML) which are probably not really hazardous. Hazard-consistent scenario earthquakes computed using intensity are found to be in the range 5.8–5.9 ML, which is more in accord with the type of earthquake that one expects to be a worst-case event in the UK. This revised version was published online in July 2006 with corrections to the Cover Date.     

On the Incorporation of the Effect of Crustal Structure into Empirical Strong Ground Motion Estimation

This article has two purposes. Firstly, a validation exercise of the modal summation technique for the computation of synthetic strong-motion records is performed for two regions of Europe (Umbria-Marche and south Iceland), using a variety of region specific crustal structure models, by comparing the predicted ground motion amplitudes with observed motions. It is found that the rate of decay of ground motions is well predicted by the theoretical decay curves but that the absolute size of the ground motions is underpredicted by the synthetic time-histories. This is thought to be due to the presence of low-velocity surface layers that amplify the ground motions but are not included in the crustal structure models used to compute the synthetic time-histories. Secondly, a new distance metric based on the computed theoretical decay curves is introduced which should have the ability to model the complex decay of strong ground motions. The ability of this new distance metric to reduce the associated scatter in empirically derived equations for the estimation of strong ground motions is tested. It is found that it does not lead to a reduction in the scatter but this is thought to be due to the use of crustal structure models that are not accurate or detailed enough for the regions studied. This revised version was published online in July 2006 with corrections to the Cover Date.     

A coherency function model of ground motion at base rock corresponding to strike-slip fault

IntroductionEarthquakedamagesurveyandresearchresultshavedemonstratedthatspatialdistributiondifferenceofgroundmotionisoneoftheimportantreasonswhichcausedlongstructure(eglongspanbridge,undergroundpipe)destroy.Thathowtoprovideareasonableinputofgroundmotionfieldforaseismicdesignoflongstructureisaurgentprobleminearthquakeengineeringfield.Atpresent,themethodtostudyspatialvariationofgroundmotionsisadoptingstatisticanalysisbasedondensearrayrecordssuchasSMART-1array,etc,togetcoherencyfunctionofground…     

Investigation of upper crust anisotropy in Ghaen-Birjand region, east-central Iran

IntroductionWhenpropagatingthroughananisotropicmedium,ashearwavesplitsintotwo(quasi)shearwaveswithdifferentpropagationspeedsandpolarizedorthogonally.Owingtotherecentdevel-opmentofseismicobservationsystem,detectionofshearwavessplittingwithverysmalldelaytimesbetweenfasterandslowershearwavesbecameavailableandprovidedpowerfulapproachfordetectionofcrustalanisotropy.Crampin(1978)emphasizedtheroleofalignedmicrocracksasacauseofcrustalanisotropyandpointedoutthatforverticallyalignedmicrocracksthedirecti…     

Fundamental study on the response characteristics of drivers during an earthquake based on driving simulator experiments

After the 1995 Kobe earthquake, the expressway structures in Japan were retrofitted and they will not now be seriously damaged under a certain level of strong earthquake motion. However, the stability of a moving vehicle has not been investigated yet. It has been reported that drivers feel seismically induced vibrations, especially in the transverse direction of vehicles. Owing to this phenomenon, drivers have some difficulty in controlling the vehicles during strong shaking. For further safety promotion of the expressway networks, it is important to understand the drivers' reactions to seismic motion. The present authors have performed a series of seismic response analyses of a moving vehicle to investigate its response characteristics based on numerical simulation. However, the responses of the driver were not considered in the simulation process. In order to investigate the drivers' reactions during an earthquake, a series of virtual tests were conducted using a driving simulator. This driving simulator has six servomotor‐powered electric actuators that control its motions. Several types of tests were carried out for different examinees to investigate drivers' responses while controlling the simulator under seismic motion. The results of this study showed that a larger response time lag to strong shaking and over turning of the steering wheel may shift the vehicle into the next lane. According to this finding, trafficaccidents could possibly occur under strong ground shaking in the case of heavy traffic. Copyright © 2004 John Wiley & Sons, Ltd.     

Study on Ground Motion Attenuation Relation in Shanghai and Its Adjacent Region

Based on intensity data in Shanghai and its adjacent region, the intensity attenuation relation is determined. Selecting the western United States as a reference area where there are rich strong ground motion records and intensity data, and by determining ground motion attenuation relation in an area lacking in strong ground motion data, we obtain the ground motion attenuation relation in Shanghai and its adjacent region.     

傅立叶相位分析导风技术的适用范围和相位重叠分析

本文利用傅立叶相位分析法对示踪云进行频域波谱分析，通过谐波的相位变化计算波速，从而导出云迹风(Cloud Motion Wind—CMW)。本文研究表明，对于给定的导风云图序列，如果示踪云在给定时间间隔内的位移小于两个像距，适用傅立叶相位分析法计算云迹风；否则，在用傅立叶相位分析法计算波速时由于高次谐波出现相位重叠，从而使计算的波速小于实际风速，此时适用最大相关系数法。     

地气测量方法研究及应用

通过对不同介质地气的空白、样品的各种对比分析,基本上可以肯定:含有一定浓度的高纯的液体捕集介质在一定程度上对地气样品的捕集是有效的,并具有元素含量本底低、易操作、分析过程简单等优点;不同介质对地气中不同元素的捕获能力有差异,王水对Au、Ag、Cu、Zn等元素的捕获能力要强于硝酸,泡塑对金元素的吸附也有一定的优势。因此,在今后的实际工作中,可根据具体矿床类型,选择合适的介质或2种介质配合使用。     

An attenuation relationship based on Turkish strong motion data and iso-acceleration map of Turkey

This paper presents an attenuation relationship of peak ground acceleration (PGA) derived from Turkish strong motion data for rock, soil and soft soil sites and an iso-acceleration map of Turkey based on this relationship. For the purpose, among all the three-component accessible records, 221 records from 122 earthquakes that occurred in Turkey between 1976 and November 2003 were selected. The database was compiled for earthquakes with moment magnitudes (M_w) and PGA values ranging between 4.1 and 7.5, and 20 and 806 gal, and distances to epicenter considered in the database were between 5 and 100 km. From the regression analysis of the data, an attenuation equation of PGA considering rock, soil and soft soil conditions was developed. The PGA values predicted from the equation suggested in this study and those both from a few domestic equations and some imported equations were compared. In addition, an iso-acceleration map of Turkey was constructed using the suggested attenuation equation and considering both known active faults and epicenter locations of the earthquakes that have occurred in Turkey.