Hyper Redundancy for Accuracy Enhancement in Automated Close Range Photogrammetry

A generic network design in close range photogrammetry is one where optimal multi-ray intersection geometry is obtained with as few camera stations as practicable. Hyper redundancy is a concept whereby, once the generic network is in place, many additional images are recorded, with the beneficial impact upon object point precision being equivalent to the presence of multiple exposures at each camera position within the generic network. The effective number of images per station within a hyper redundant network might well be in the range of 10 to 20 or more. As is apparent when it is considered that a hyper redundant network may comprise hundreds of images, the concept is only applicable in practice to fully automatic vision metrology systems, where it proves to be a very effective means of enhancing measurement accuracy at the cost of minimal additional work in the image recording phase. This paper briefly reviews the network design and accuracy aspects of hyper redundancy and illustrates the technique by way of the photogrammetric measurement of surface deformation of a radio telescope of 26 m diameter. This project required an object point measurement accuracy of σ  = 0·065 mm, or 1/400 000 of the diameter of the reflector.     

Electrical aerosol spectrometer of Tartu University

The electrical aerosol spectrometer (EAS) of the parallel measuring principle at Tartu University is an efficient instrument for rapid measurement of the unstable size spectrum of aerosol particles. The measuring range from 10 nm to 10 μm is achieved by simultaneously using a pair of differential mobility analyzers with two different particle chargers. The particle spectrum is calculated and measurement errors are estimated in real time by using a least-squares method. Experimental calibration ensures reliability of measurement. The instrument is well suited for continuous monitoring of atmospheric aerosol.     

青藏公路路基变形分析

为研究青藏公路多年冻土人为上限在退化过程中对路基变形产生的影响过程和程度, 在唐古拉山以南选择了3处具有代表性的路面进行了为期2 a的路面变形观测. 资料表明, 在多年冻土人为上限退化过程中随着公路路基结构、冻土类型的不同, 路基变形从冻胀和融沉过程、冻胀量和融沉量、发生的时间都有很大的不同. 在高含冰量多年冻土区采用半挖半填结构产生的路基变形最为剧烈, 在含冰量相对少且采用较高路堤结构的地段路基变形过程相对平缓. 同时结合探地雷达的勘察结果对路基下的融化区、多年冻土区的内部结构进行了分析. 结果显示,多年冻土人为上限的下移、地下冰的融化会在多年冻土人为上限以上的地质体中导致较强烈的层间错动和扰动.     

Evaluation of the Reduction in Uncertainty Obtained by Conditioning a 3D Stochastic Channel to Multiwell Pressure Data

A stochastic channel embedded in a background facies is conditioned to data observed at wells. The background facies is a fixed rectangular box. The model parameters consist of geometric parameters that describe the shape, size, and location of the channel, and permeability and porosity in the channel and nonchannel facies. We extend methodology previously developed to condition a stochastic channel to well-test pressure data, and well observations of the channel thickness and the depth of the top of the channel. The main objective of this work is to characterize the reduction in uncertainty in channel model parameters and predicted reservoir performance that can be achieved by conditioning to well-test pressure data at one or more wells. Multiple conditional realizations of the geometric parameters and rock properties are generated to evaluate the uncertainty in model parameters. The ensemble of predictions of reservoir performance generated from the suite of realizations provides a Monte Carlo estimate of the uncertainty in future performance predictions. In addition, we provide some insight on how prior variances, data measurement errors, and sensitivity coefficients interact to determine the reduction in model parameters obtained by conditioning to pressure data and examine the value of active and observation well data in resolving model parameters.     

厚层覆盖区综合物化探方法找金试验研究——以广西兴安金石金矿为例

在兴安金石金矿外围 4号分散流异常区 ,通过地电化学提取金测量法 ,查明测区存在 5个走向规模小于 5 0 m的金异常区 ,W( Au) 最大值为 72 .4× 10 - 9,高出背景值十几倍 ,并藉综合土壤吸附汞测量 ,高精度磁测和激发极化法等多种物化探方法来确定这些异常区的地质、地球化学和地球物理特征 ,提出金矿成矿的有利部位在金的地电提取高异常区、高汞量异常区、高磁性异常区、低视电阻率异常区和中等视极化率异常区的“三高一低一中”的找矿模式。确定测区的北北东角 (右下角 )一带具备有利的金矿成矿条件     

Method of Data Reduction and Uncertainty Estimation for Platinum-Group Element Data Using Inductively Coupled Plasma-Mass Spectrometry

A data reduction method is described for determining platinum-group element (PGE) abundances by inductively coupled plasma-mass spectrometry (ICP-MS) using external calibration or the method of standard addition. Gravimetric measurement of volumes, the analysis of reference materials and the use of procedural blanks were all used to minimise systematic errors. Internal standards were used to correct for instrument drift. A linear least squares regression model was used to calculate concentrations from drift-corrected counts per second (cps). Furthermore, mathematical manipulations also contribute to the uncertainty estimates of a procedure. Typical uncertainty estimate calculations for ICP-MS data manipulations involve: (1) Carrying standard deviations from the raw cps through the data reduction or (2) calculating a standard deviation from multiple final concentration calculations. It is demonstrated that method 2 may underestimate the uncertainty estimate of the calculated data. Methods 1 and 2 do not typically include an uncertainty estimate component from a regression model. As such models contribute to the uncertainty estimates affecting the calculated data, an uncertainty estimate component from the regression must be included in any final error calculations. Confidence intervals are used to account for uncertainty estimates from the regression model. These confidence intervals are simpler to calculate than uncertainty estimates from method 1, for example. The data reduction and uncertainty estimation method described here addresses problems of reporting PGE data from an article in the literature and addresses both precision and accuracy. The method can be applied to any analytical technique where drift corrections or regression models are used.     

川滇菱形块体边界的现今地壳形变

依据川滇菱形块体边界带上所有跨断层测量资料，分析了各场地所处断裂的近期形变特征，结果表明；川滇菱形块体北段形变活动逐渐减弱，南段逐渐加强，各条断裂分别显示出不同的变形特征；菱形块体的现今水平形变以左旋走滑运动为主，垂直形变速度较低，且呈上盘抬升与下降交替出现的运动特征，部分场地的形变异常变化与其邻近的地震活动密切相关。     

1996年包头6.4级地震的地壳应变特征

根据GPS观测资料求出的水平地应变和由跨断层垂直形变计算出的速率强度累积率，研究了包头-大同地区1992～1995年、1995～1996年和1996～1999年的各时期的应变特征，并对包头6.4级(1996年5月3)地震前后的地应变进行对比，认为以压应变为主导的高值区可能是未来强震孕育的地区．面应变、主压应变、剪应变和趋势累积率同时较高的地区，强震危险性较大．一般低应变区和张应变为主导的地区，孕育强震的可能性小，属于比较稳定的地区．1992～1999年包头-大同地区的GPS水平应变的演变，反映了1996～1998年地震幕的孕育发展及结束的全过程．以压应变为主的高应变区和应变梯度带可作为未来强震危险区的判定标志之一．      

河流水质风险评价的灰色-随机风险率方法

提出了量化影响河流水质的随机不确定性与灰色不确定性的水质超标灰色－随机风险率概念，建立了水质超标灰色－随机风险率评价模型。在水质单项参数评价模型中，将河流污染物浓度变量的分布处理成灰色概率分布，将污染物浓度超过水质类别标准值的风险率处理成灰色概率，即水质超标灰色－随机风险率。在水质综合评价模型中，河流水环境系统被考虑为担任某一使用可能的可靠性系统，而任意一种水质参数超标意味着河流水体使用功能不能得到应有的保证，也即表明水体综合评价超标，最后借鉴系统可靠性分析的理论和方法计算水质综合超标率。该方法应用于黄河花园口断面重金属污染风险评价。     

GPS在地面沉降监测中的应用探讨

利用GPS进行地面沉降监测能够解决传统测量方法工作量大、周期长的问题。该文结合实例，论述了GPS在地面沉降监测中的应用，分析了GPS测量方法的优点和误差，提出了GPS测量地面沉降的适用条件。