柴达木盆地第三系咸水湖相生油岩古沉积环境地球化学特征

在系统分析柴达木盆地西部第三系咸水湖相生油岩样品的微量元素、有机物、粘土矿物组成的基础上,揭示了研究区生油岩的无机元素和有机质组成特征;并结合沉积环境的无机与有机地球化学指标,重建了生油岩沉积时的古沉积环境。生油岩的B、Cl-及伽玛蜡烷含量表明,沉积时的水介质条件是半咸水—咸水环境,并伴随湖盆沉积中心北迁过程各层位地层的盐度发生规律性时空]化;生油岩的Fe2 /Fe3 、S2-、Pr/Ph比值、藿烷碳数分布模式及黄铁矿含量反映其沉积时的沉积环境为强还原性;粘土矿物组合特征及含量揭示这些生油岩的沉积相带介于中心咸湖相和边缘咸湖相之间。     

The buckling of a corrugated carbon fibre cylinder under external hydrostatic pressure

A theoretical and an experimental investigation was carried out, where a carbon fibre corrugated circular cylinder was tested to destuction under external hydrostatic pressure. The theoretical investigation was via the finite element method, where the structure was modelled with several orthotropic axisymmetric thin-walled shell elements. The experimental observations were aided with strategically placed strain gauges. Comparison between theory and experiment showed that the experimentally observed buckling pressure was a little lower than the theoretical prediction. This may have been due to the fact that the model had slight initial geometrical imperfections in the circumferenential direction.     

鲁苏榴辉岩的地球化学

以微量元素、稀土元素、Ｓｒ和Ｎｄ同位素变异特征为依据，确定鲁苏榴辉岩为多成因、多来源和多阶段，指出主要是在印支期扬子陆块与华北陆块碰撞造山作用过程中，挤入的上地幔碎片以及不同原岩类型的壳内高压变质岩碎块。燕山晚期的区域构造热事件使得某些榴辉岩的同位素体系再平衡。     

Geochemistry and environment evolution of Core E in the Laizhou Bay since last stage of Middle Pleistocene

IwrincrIONOn the evolution of palcoenvironment, salt-water encroachmnt and the distributionof subsurface brine in the LaizhOu Bay area, many researches had been carried out, and muchknowledge abeut the gcolOgical features in this area since Late QUaternary was aCquired' ) (H8nand Wu, l992; Han and Meng, l994; Wen et al. l989). However there was IittIe studyon the sediment geOChemical characteristics since Quaternary. In this Paper, the element strati-graphic characteristics and evolut…     

非常规管节点疲劳寿命分析与计算

对非常规管节点的疲劳寿命进行了分析研究，用SESAM计算疲劳载荷，应用精细有限元分析计算热点应力，用规范的S—N曲线计算管节点的疲劳寿命。通过实例计算表明，这些处理对非常规管节点疲劳寿命分析与计算是很有效的。     

Geochemistry of trace elements and Sr-Nd isotopes of foraminifera shell from the Okinawa Trough

ＩＮＴＲＯＤＵＣＴＩＯＮＰｒｏｖｅｎａｎｃｅｏｆｍａｒｉｎｅｓｅｄｉｍｅｎｔｓｈａｓａｌｗａｙｓｂｅｅｎａｆｏｃｕｓｅｄｐｒｏｂｌｅｍｉｎｍａｒｉｎｅｓｅｄｉｍｅｎｔｇｅ ｏｌｏｇｙ.Ｒｅｃｏｇｎｉｔｉｏｎｏｆｅｎｄｍｅｍｂｅｒｓａｎｄｅｓｔｉｍａｔｉｏｎｏｆｔｈｅｉｒｒｅｌａｔｉｖｅｐｒｏｐｏｒｔｉｏｎｓｆｒｏｍｍｉｘｅｄｓｅｄｉｍｅｎｔｓｈａｖｅｂｅｅｎａｋｅｙｃｏｎｔｅｎｔｉｎｔｈｅｓｔｕｄｙｏｆｐｒｏｖｅｎａｎｃｅ .Ｆｏｒｔｈｉｓａｉｍ ,ｉｔｉｓｎｅｃｅｓｓａｒｙｔｏｓｅｌｅｃｔｅｎｄｍｅ…     

Structural modeling and testing of a concrete canoe

A finite element model is set up and experimental tests are performed to help understand the behavior of a concrete canoe and subsequently optimize its design. First, the performance criteria that must be satisfied to participate at the annual ASCE/Master Builders competition are described. Then, the finite element model and the different loading cases that were studied are presented. Results from these loading cases are discussed and used to optimize the material properties as well as the thickness of the hull and the dimensions of the gunwale and reinforcing ribs. Static and dynamic experimental tests were also conducted to validate the results of the finite element analyses. The results indicate that the main stresses and strains are caused by the static load cases. The additional stresses caused during races are small.     

迎风有限元法在三维潮流数值模拟中的应用

为研究和开发迎风有限元法在河口海岸三维波数值模拟中的应用，并为建立三维物质扩散模型，最终为解决实际工程问题打下基础，以非线性浅水波方程为基础，采用一咱平面迎风有奶元与垂向工有限差分相结合地数值计算方法建立三维潮流数学模型，基地实际的物理过程，在计算中将三维流动分成外重力波和内重力波，耦联求解潮位和流速的空间分布。应用本模式计算了天津新港附近渤海海域的三维潮流运动，以较高的分辩率揭示了潮流空间结构特     

卤虫无节幼体的营养强化对黑斑口虾蛄(Oratosquilla kempi)幼体发育的影响

用扁藻、酵母、“鱼油 酵母”强化和“不强化”4种方式处理的卤虫无节幼体投喂黑斑口虾蛄各期幼体,比较不同强化方法对黑斑口虾蛄幼体成活率、变态率、生长速度及总脂与脂肪酸组成的影响。结果表明,3种方式强化12h后的卤虫无节幼体与对照组相比,总脂含量都有不同程度的增加。卤虫无节幼体的脂肪酸组成与强化方式密切相关,其中“鱼油 酵母”强化的卤虫无节幼体20∶5n-3(EPA)和22∶6n-3(DHA)占总脂肪酸的比例最高,分别为5·74%和4·84%。投喂强化后富含EPA和DHA的卤虫无节幼体,可增加黑斑口虾蛄幼体体内脂肪酸尤其是EPA和DHA等不饱和脂肪酸的含量,从而提高其幼体的成活率、变态率与发育速度。