P-waveform analysis for local subduction geometry south of Puget Sound,Washington

The local subduction geometry at a site south of Puget Sound in western Washington is investigated using teleseismicP-waveforms recorded on a three-component event triggered seismograph. The data are processed using source equalization deconvolution in order to isolate locally convertedP-to-S arrivals and stacked to improve the signal-to-noise ratio. Stable arrivals in the radial component indicate an oceanic Moho within the subducted slab at a depth of about 53 km beneath the station. Observed amplitude variations with azimuth in the radial data, as well as qualitative aspects of the tangential data, are used to establish a slab dip of 16° to the southeast. Our results are compatible with previous results from a site 60 km to the west, and further confirm a substantial warp in the regional geometry of the subducted Juan de Fuca plate.     

Simultaneous iterative time-domain sparse deconvolution to teleseismic receiver functions

In this paper, we present a new approach to estimate high-resolution teleseismic receiver functions using a simultaneous iterative time-domain sparse deconvolution. This technique improves the deconvolution by using reweighting strategies based on a Cauchy criterion. The resulting sparse receiver functions enhance the primary converted phases and its multiples. To test its functionality and reliability, we applied this approach to synthetic experiments and to seismic data recorded at station ABU, in Japan. Our results show Ps conversions at approximately 4.0 s after the primary P onset, which are consistent with other seismological studies in this area. We demonstrate that the sparse deconvolution is a simple, efficient technique in computing receiver functions with significantly greater resolution than conventional approaches.     

Crustal structure using receiver function in the east part of A＇nyemaqen suture belt

Twenty broadband seismographs were deployed along Hongyuan, Sichuan to Wuwei, Gansu. 81 teleseismic events were recorded in one year. We computed receiver functions from teleseismic waveform data and obtained S wave velocity structure beneath each station along the profile by using receiver function inversion method. The results revealed that the crustal structure is very complex and crustal average S wave velocity is to be on the low side. Low velocity structure generally exists in the depth range of 10～40 km in the crust between Aba arc fault and northern edge fault of Qinling earth＇s axis and it is a tectonic feature of complex geological process such as ancient A＇nyemaqen Tethys ocean from closing and side colliding to subducted plate exhumed or thrust rock slice lifted. The Moho is about 50 km depth along the profile and is slightly deeper in the south than in the north.     

一种附约束的单频单历元GPS双差相位解算方法

在各类变形观测中，存在着2次观测的变形值不大及各种变形方向和大小可以比较精确预测等特点，可以把这些特征作为约束条件，对GPS单历元相位观测方程进行求解。基于以上几点，提出了一种含约束条件的单频单历元GPS相位求解算法和简单实用的模糊度搜索方法，本方法据观测值直接估计模糊度参数，并根据求出的模糊度估值进行搜索，还分析了最优解的获得和检验方法，最后用2个实例说明了该法的有效性和实用性。     

利用强震记录分析场地的地震反应

利用唐山近场强震记录对如何分析场地反应进行研究，分析比较了多种方法:线性反演法、传统的谱比法以及接收函数法．通过比较研究，发现各种方法都能给出土层场地的卓越周期，但每种方法给出的场地反应不完全相同．其中，传统的谱比法与线性反演法的结果较为接近，而接收函数法的结果则同其它两种方法的结果相差较大．在线性反演法中，给出了Ｓ波的品质因子QS，QS 在0.5～32Ｈz范围内与频率有关:QS（f）＝67 f 1.1．      

电磁波层析成像在绵阳污水处理工程场地勘探中的应用

电磁波层析成像(CT)是一种新的地球物理勘探方法，不仅勘探精度高，而且还具有快速、省钱的优点，本文叙述了电磁波层析成像技术的基本原理、工作方法及污水处理工程场地的勘探实例。最终以二维图像的形式直观、清晰地重现地下介质的构造形态，为工程场地地基安全稳定性评价提供重要依据。     

多波束测深系统的高精度差分GPS数据实时优化

多波束海底地形探测是目前世界上最为先进的海底地形探测方法.高精度的差分GPS定位是实现多波束系统高精度测深的最基本前提.在海上探测作业过程中,由于客观原因,差分GPS数据存在偶然误差,影响多波束测深精度.本文提出对差分GPS数据进行航速、航向平滑处理、误差定位点位置推算的实时优化方法和数学模型,并给出实际实现的例子.     

Preliminary study of crust-upper mantle structure of the Tibetan Plateau by using broadband teleseismic body waveforms

As part of a joint Sino-U.S. research project to study the deep structure of the Tibetan Plateau, 11 broadband digital seismic recorders were deployed on the Plateau for one year of passive seismic recording. In this report we use teleseimic P waveforms to study the seismic velocity structure of crust and upper mantle under three stations by receiver function inversion. The receiver function is obtained by first rotating two horizontal components of seismic records into radial and tangential components and then deconvolving the vertical component from them. The receiver function depends only on the structure near the station because the source and path effects have been removed by the deconvolution. To suppress noise, receiver functions calculated from events clustered in a small range of back-azimuths and epicentral distances are stacked. Using a matrix formalism describing the propagation of elastic waves in laterally homogeneous stratified medium, a synthetic receiver function and differential receiver functions for the parameters in each layer can be calculated to establish a linearized inversion for one-dimensional velocity structure. Preliminary results of three stations, Wen-quan, Golmud and Xigatze (Coded as WNDO, TUNL and XIGA), located in central, northern and southern Plateau are given in this paper. The receiver functions of all three stations show clear P-S converted phases. The time delays of these converted phases relative to direct P arrivals are: WNDO 7.9s (for NE direction) and 8.3s (for SE direction), TUNL 8.2s, XIGA 9.0s. Such long time delays indicate the great thickness of crust under the Plateau. The differences between receiver function of these three station shows the tectonic difference between southern and north-central Plateau. The waveforms of the receiver functions for WNDO and TUNL are very simple, while the receiver function of XIGA has an additional midcrustal converted phase. The S wave velocity structures at these three stations are estimated from inversions of the receiver function. The crustal shear wave velocities at WNDO and TUNL are vertically homogeneous, with value between 3.5–3.6 km/s down to Moho. This value in the lower crust is lower than the normal value for the lower crust of continents, which is consistent with the observed strong Sn attenuation in this region. The velocity structure at XIGA shows a velocity discontinuity at depth of 20 km and high velocity value of 4.0 km/s in the midcrust between 20–30 km depth. Similar results are obtained from a DSS profile in southern Tibet. The velocity under XIGA decreases below a depth of 30 km, reaching the lowest value of 3.2 km/s between 50–55 km. depth. This may imply that the Indian crust underthrusts the low part of Tibetan crust in the southern Plateau, forming a “double crust”. The crustal thickness at each of these sites is: WNDO, 68 km; TUNL, 70 km; XI-GA, 80 km. The Chinese version of this paper appeared in the Chinese edition ofActa Seismologica Sinica,14, Supp., 581–592, 1992.     

西昆仑接收函数反演与构造解析

中法合作布设的青藏高原西昆仑叶城-噶尔(狮泉河)天然地震探测剖面穿越了西昆仑构造的主要构造单元, 通过对36个台站128个远震P波事件的接收函数分析,取得了各台站的接收函数随方位角和震中距变化的趋势, 分析了变化趋势与地壳构造的关系。通过台站平均接收函数的反演拟合,取得了120km深度范围以上的横波速度分布,综合地质构造解释,发现康西瓦断裂地表倾斜渐变为直立并略向南拖曳的现象,塔里木前陆盆地沉积与逆冲构造有比较明显的显示,同时推测了盆地下的滑脱构造。班公湖-怒江断裂也有向北俯冲的显示,得出了印藏碰撞远距离效应在西昆仑受阻,应力通过地表次级断裂释放,同时形成盆地沉积的前陆构造模式。     

多波束在海底复杂地形条件下大比例尺测量方法探讨

文章主要对使用大比例尺进行海底地形测量方法进行了简要的描述,测量过程中的方法技术、数据处理方法、测量效果说明多波束在复杂地形条件下可以取得良好的效果。