A virtual globe-based time-critical adaptive visualization method for 3D city models

3D city models, which are important items of content on the virtual globe, are characterized by complicated structures and large amounts of data. These factors make the visualization of 3D city models highly dependent upon the performance of computer hardware. Thus, achieving the efficient rendering of 3D city models using different hardware performance levels represents one of the key problems currently facing researchers. This paper proposes a time-critical adaptive visualization method that first estimates the possible rendering time for each model according to the data structure of the model in addition to the CPU/GPU performance of the computer. It then dynamically adjusts the rendering level for each model based on the results of an estimation of the rendering time to ensure that the final scene can be completed within a given time. To verify the effectiveness and flexibility of this method, it is applied using different computers. The results show that the adaptive visualization method presented in this paper not only can adapt to computers with different levels of performances but also demonstrates an obvious improvement in the time estimation precision, visual effects, and optimization speed relative to existing adaptive visualization methods.     

高温硬岩空气潜孔锤钻头设计

干热岩试验性开发井钻井施工,在高温硬岩的地层条件下,如何实现高效钻进仍存在很多技术难点。空气潜孔锤钻进技术是解决硬岩地层钻进的有效方法之一,潜孔锤钻头是空气潜孔锤钻进的关键器具。根据青海共和干热岩GH-01井空气潜孔锤钻进技术应用情况,分析探讨了空气潜孔锤钻头断齿、掉齿、磨损严重、使用寿命短等问题,从钻头结构设计、钻头材料选取、钻头冷压固齿工艺等几个方面对空气潜孔锤钻头进行了优化。固齿优化过程中采用有限元分析方法,对钻头冷压固齿过盈量进行仿真分析计算,根据分析计算结果确定最优固齿过盈量。通过对潜孔锤钻头结构、材料、加工等优化,为适用于高温硬岩的空气潜孔锤钻头研制提供了借鉴。为提高空气潜孔锤钻进综合效率,为干热岩钻探开发提供了技术支持和技术储备。     

探地雷达宽角反射图形拟合方法

探地雷达共中心点(CMP)法仅用于局部速度测试,为使用宽角反射法进行剖面探测,可固定一个雷达天线而将另一个天线沿测线移动,从而获取整个地质界面的反射信号。本文提出宽角反射剖面探测方法,基于平直岩层界面导出其反射信号的关系式,并开发出解释软件,可精确计算岩层几何参数和层速度,从而进行地质分层。     

基于高光谱技术的黑土地微量金属元素探测方法及地学意义

在土壤中重金属含量较低的情况下,重金属的高光谱特征响应非常微弱,不易构建精确的高光谱直接反演模型。为了解决上述问题,依据土壤化学变量间的理化性质,将重金属富集特征转移到与之相关的化学主量元素上,使重金属微弱的信息得以间接定量反演。文中以海伦市黑土土壤为研究对象,通过主成分分析、聚类分析确定了主量元素氧化铁（Fe₂O₃）与微量重金属As、Zn、Cd之间存在明显吸附赋存关系。选用偏最小二乘法构建了研究区氧化铁含量的最佳反演模型（决定系数为0.704,均方根误差为0.148,F检验为12.732）,并利用氧化铁与As、Zn、Cd之间的赋存关系,通过神经网络构建了氧化铁预测值与重金属真实值间的非线性拟合模型,得出As含量的拟合程度最高,Zn的拟合程度较好,Cd的拟合效果较理想,总体相关性分别为0.796、0.732、0.530。研究结果表明,基于氧化铁含量的间接预测模型能对微量重金属As、Zn、Cd进行较好的定量预测,为微量重金属含量的定量分析提供了新的方法参考,为高光谱遥感技术预测土壤重金属含量提供了依据,增强了土壤微量重金属反演可行性,对细化自然资源质量监测、深化开展地学系统综合分析与评价有重要意义。      

Explicit integration of a porosity‐dependent hydro‐mechanical model for unsaturated soils

An adaptive substepping explicit integration scheme is developed for a porosity‐dependent hydro‐mechanical model for unsaturated soils. The model is referred to as the modified σ –Θ model in this paper, which features the employment of the subloading surface plasticity and the stress–saturation approach. On numerical aspects, convex/nonconvex subloading surfaces in the σ –Θ space may result in incorrect loading–unloading decisions during the integration. A new loading–unloading decision method is developed here to solve the problem and then embedded into the explicit integration scheme for the modified σ –Θ model. In addition, to enhance the accuracy of the explicit integration, local errors from both hydraulic and mechanical components are included in the error control for each substep. A drift correction method is also developed to ensure the state point lies on the subloading surface in the σ –Θ space within a set error level. The performance of the loading–unloading decision method for the modified σ –Θ model is discussed through comparing it with the conventional loading–unloading decision method. The importance of involving the hydraulic component in the error control is also demonstrated. The accuracy and efficiency of the proposed adaptive substepping explicit integration scheme for the modified p–Θ model are also studied via several numerical examples. Copyright © 2016 John Wiley & Sons, Ltd.     

地质统计学变差函数人机对话拟合

变差函数的研究在地质统计学中具有十分重要作用，本文运用界面图形图像处理强的Ｃ￣（＋＋）语言实现了界面友好汉化人机对话变差函数的拟合，主要包括管理菜单的生成，实验变差值的求解，变差图的图形显示，标准函数模型的计算及变差函数人机对话求解等部分。最后对比一下回归分析与人机对话拟合结果。     

南极地区小象幅航测内业成图

本文阐述了用１２０型非量测相机对南极中山站地区所摄制的１４００００小象幅航片制作１５０００地形图、正射像片图及１１００００地形图的原理、方法和精度。在外定向中适当增加控制点及考虑到加入适当的权的情况下，其外定向最大对点误差平面为２．２ｍ，高程为１．２ｍ。所制作的正射像片图和相应的地形图套合中误差为０．１４ｍｍ。其结果完全可满足南极科研、考察的要求     

砂土的抗剪强度与干密度的曲线拟合

利用曲线拟合的最小二乘法原理，确定砂土在某垂直压力下的抗剪强度与干密度的关系，并绘制曲线图，可避免人工处理数据的随意性，减小了误差。     

A comparison of single‐run pushover analysis techniques for seismic assessment of bridges

Traditional pushover analysis is performed subjecting the structure to monotonically increasing lateral forces with invariant distribution until a target displacement is reached; both the force distribution and target displacement are hence based on the assumption that the response is controlled by a fundamental mode, that remains unchanged throughout. However, such invariant force distributions cannot account for the redistribution of inertia forces caused by structural yielding and the associated changes in the vibration properties, including the increase of higher‐mode participation. In order to overcome such drawbacks, but still keep the simplicity of using single‐run pushover analysis, as opposed to multiple‐analyses schemes, adaptive pushover techniques have recently been proposed. In order to investigate the effectiveness of such new pushover schemes in assessing bridges subjected to seismic action, so far object of only limited scrutiny, an analytical parametric study, conducted on a suite of continuous multi‐span bridges, is carried out. The study seems to show that, with respect to conventional pushover methods, these novel single‐run approaches can lead to the attainment of improved predictions. Copyright © 2007 John Wiley & Sons, Ltd.     

基于启发式图搜索的遥感影像道路半自动提取

启发式图搜索法用于线状目标识别的原理是：用图结构表示边缘点和边缘段，根据启发函数计算顶点权值，在图的路径上建立相应的代价函数，通过在图中搜索对应的最小代价的通道以找到最优路径。图搜索法是一种全局最优方法，它在受噪声影响较大时效果仍然较好。文中使用了启发式图搜索法（A*算法）实现了道路的半自动跟踪。它的基本思路是：首先利用自适应平滑滤波算子进行道路信息增强，然后对传统的道路数学模型进行了进一步的扩展，突出了对道路几何特性和辐射特性的描述，并依此构建图搜索的代价函数，实现了基于启发式图搜索法A*算法的道路半自动跟踪。经实验证明，该方法进行遥感影像的道路半自动提取效果较好。