汕头地区地壳平均波速比的联合测定

本文根据汕头传输台网测定的96次地震走时数据,用联合测定法计算了该区地壳波速比,得到地壳平均波速比为1.707±0.005。此值较华南区域平均波速比1.692略高。因研究时段区内无M≥5级地震,故1.707±0.005应视为该区地壳波速比正常背景值。     

浮游植物叶绿素a 含量测定方法的比较及优化

比较了丙酮萃取法和乙醇-超声波法测定水体中叶绿素a的方法,并对后者进行优化。结果显示,乙醇-超声波法的萃取效率显著地高于丙酮法的效率,两种方法的相关系数为0.9990,回归方程为Chla丙酮=1.0932Chla乙醇–11.677。优化后的乙醇-超声波法的最佳处理条件为:带样滤膜–20℃,冰冻24 h以上,加适量80℃热乙醇在80℃水浴中解冻,经超声振荡处理3 min后,室温黑暗条件下萃取6 h,再离心定容测定。     

一种确定大小地震比例的新方法及其在地震预报中的应用

本利用贝叶斯判别准则,提出了一种确定大小地震比例的新方法,并以１９８９年山西阳高地震和１９８３年山东荷泽地震为例,说明了此方法在震预报中应用的可能性,并说明对弱地震活动地区,本方法具有明显的可行性。     

Theoretical models and experimental determination methods for equations of state of silicate melts: A review

Silicate melts are very active in the interior of the Earth and other terrestrial planets, and are important carriers for the transport of material and energy. The determination of the equation of state(EOS) for silicate melts and the acquisition of a precise quantitative relationship between molar volume(or density) and temperature, pressure, and composition is essential for simulating the generation, migration, and eruption processes of magmas and the evolution of the magma ocean stage during the early formation of the Earth and other terrestrial planets, for calculating and modeling the phase equilibria involving silicate melts, and for revealing the variation of the microstructure of silicate melts with pressure. However, it is experimentally challenging to determine the volumetric properties of silicate melts and the accumulated density data at high pressure are still very limited due to a series of problems such as: the high liquidus temperature of silicate rocks; proneness for silicate melts to react with sample capsules to change the melt composition; and proneness for melts to flow and leak during the high pressure and high temperature experiments. In recent years, there is rapid progress in the high pressure and high temperature experimental techniques, in terms of not only the extension of temperature and pressure ranges but also the improvement on the accuracy of measurements, and the emergence of new methods for in-situ measurements. Here, we review the widely-used theoretical models of ambient-pressure and high-pressure EOS for silicate melts, and illustrate some problems that need to be solved urgently:(1) the room pressure EOS for iron-and titanium-bearing silicate melts needs to be improved;(2) the partial molar properties of the H2 O and CO2 components in silicate melts containing volatile components may vary markedly with the melt composition, which need to be addressed in high-pressure EOS;(3) how the formulation and applicable range of EOS correspond to changes in melt structure and compression mechanism requires further study. We highlight the basic principle and applicable range of various methods for determining the EOS for silicate melts, and compare the advantages and disadvantages of doublebob Archimedes method, fusion curve analysis, shock compression experiments, sink-float method, X-ray absorption, X-ray diffraction and ultrasonic interferometry. Future trends in this field are to develop experimental techniques for in situ measurements on melt density or sound velocity at high temperature and high pressure and to accumulate more experimental data,and on the other hand, to improve the theoretical models of the EOS for silicate melts by a combination of research on the microstructure and compression mechanisms of silicate melts.     

Determination of the Seismogenic Structure of the 1861 East of Pulandian M6.0 earthquake

The 1861 M6.0 earthquake occurring in the east of Pulandian is another strong earthquake with M≥6.0 besides the 1975 Haicheng M7.3 earthquake in the Liaodong peninsula. Through repeated investigations, the epicenter of the 1861 earthquake was located at Gupao, a village east of Pulandian. Based on the analyses of damage survey and precise location of modern instrumental earthquake data, the activity and seismic risk of the Jinzhou fault, Pulandian bay fault and the NW-trending Pulandian fault were analyzed. And by comparing the deep seismogenic environment between Pulandian and Haicheng, it is found that, as a neogenic active fault, the NW-trending fault, conjugated with the Jinzhou fault, has a higher seismic risk. The NW-trending fault is the seismogenic structure of the 1861 M6.0 earthquake. And the Jinzhou fault, as a major fault in the Liaodong Peninsula, has controlled the seismicity of the region. The Pulandian bay fault is relatively inactive, with weak seismicity, and unrelated to the earthquake.     

铜镉渣中总锌的容量法测定

用二次分离法将氨分离滤液中的干扰离子生成氢氧化物沉淀,消除有色金属离子的干扰,锌回收良好,电锌铜镉渣试样中测定总锌结果令人满意.     

瓷坩埚代替铂坩埚测定铝土矿石中的烧减量

采用优质瓷坩埚代替铂坩埚,按YS/T575.19—2007测定铝土矿中烧减量,经国家标准管理样的对比测试,结果准确,重现性较好(RSD,n=6在0.30%~0.70%)。     

利用VLBI数据确定"探测一号"卫星的轨道

双星计划的“探测一号”是中国首颗真正严格意义上的科学实验卫星,其运行轨道为中国迄今所发射的卫星中距地球最远,远地点地心距达7．8万公里．采用射电天文的VLBI技术可以对“探测一号”以及更远的深空目标,如探月飞行器实现跟踪．为了验证VLBI技术在我国探月计划中的作用,上海天文台组织了国内目前仅有的上海、乌鲁木齐和昆明3个台站对“探测一号”进行试跟踪,利用对“探测一号”约两天的VLBI观测数据,确定“探测一号”卫星的轨道,对VLBI的定轨能力做初步的探讨．按照测控部门提供的初轨 (其精度仅保证跟踪)推算的轨道与VLBI时延的拟合误差平均约2 km,时延率的拟合误差平均约15 cm／s．而利用VLBI数据定轨后的拟合程度相对于初轨有了很大的改善,结果表明,单独利用VLBI时延定轨,时延的拟合精度约5．5 m,作为外部检核的VLBI时延率的拟合精度在2 cm／s左右．单独利用VLBI时延率定轨,时延率的拟合精度约为1．3 cm／s,作为外部检核的VLBI时延的拟合精度约为29 m．而若将时延和时延率数据联合定轨,采用其内符精度加权,VLBI时延和时延率的残差分别为5．5 m和 2 cm／s．为了合理地评估VLBI定轨的真实精度,利用模拟数据进行误差协方差分析,结果表明VLBI定轨精度受动力学模型误差的影响较大,由于"探测一号”卫星的动力学模型难以精确确定,所以利用两天弧段的VLBI数据确定“探测一号”卫星轨道的位置误差为km量级,而速度误差可达cm／s量级．模拟计算还表明, VLBI和USB数据联合定轨可以大大提高定轨精度．     

瞬态面波在隧道工程滑坡处治中应用一例

结合工程实例,介绍隧道工程设计施工过程中利用瞬态面波勘探技术,可确定滑坡体的覆盖范围及基岩埋深,是高效、经济探查、处治方法。     

控制性深孔地震输入界面位置的确定方法和影响研究

探讨了在工程场地地震安全性评价的地震反应分析模型中,江苏省盐城地区部分工程场地内深度超过100m时剪切波速仍小于500m/s的控制性深孔,采用近似估算方法弥补所缺波速值和确定地震输入界面后,进行波速值和地震输入界面位置的不确定性对工程场地地震反应的影响研究,包括地表地震动峰值加速度和反应谱特征周期等,为其他地区控制性深孔的地震输入界面位置的确定方法和影响研究提供参考。