SEM-EDX Characterisation of Tropospheric Aerosols in the Negev Desert (Israel)

Individual aerosol particles collected in the Negev desert in Israel during a summer and winter campaign in 1996–1997 were analysed by scanning electron microscopy with energy-dispersive X-ray analysis. Hierarchical cluster analysis was performed to interpret the data on the basis of particle diameter and composition. Eleven particle classes (groups) provided clues on sources and/or particle formation. The summer samples were enriched in sulphates and mineral dusts; the winter samples contained more sea salts, aged sea salts, and industrial particles. The fine size fraction below 1 m diameter was enriched in secondary particles and showed evidence of atmospheric processing. The secondary sulphate particles were mainly attributed to long-range transport. A regional conversion from calcite to calcium sulphate occurred during summer. Industrial particles originating from local pollution appeared during winter.     

山西义兴寨金矿床金矿物颗粒的产出及其成矿动力学意义

山西义兴寨金矿床的金主要呈包体金和裂隙金两种产出状态.文章根据成矿地球化学动力学理论,论证了金元素在含矿断裂发生脆性破裂和脆-韧性扩张活动中析出的化学反应类型,以及受反应动力学条件的制约,形成矿石中金不同产出状态的规律.指出热液矿床中普遍存在的包体金为热液成矿早期阶段断裂发生脆性破裂和成矿流体沸腾,导致快速反应结晶的产物;而裂隙金和晶隙金为成矿晚期金等矿质在流体中残余富集,同时成矿断裂再次发生脉动破裂,即成矿热力学演化与有利的构造动力学因素耦合作用的结果.得出金矿物颗粒的产出状态具有成矿动力学意义的结论.     

The ALOMAR Rayleigh/Mie/Raman lidar: objectives, configuration, and performance

We report on the development and current capabilities of the ALOMAR Rayleigh/Mie/Raman lidar. This instrument is one of the core instruments of the international ALOMAR facility, located near Andenes in Norway at 69°N and 16°E. The major task of the instrument is to perform advanced studies of the Arctic middle atmosphere over altitudes between about 15 to 90 km on a climatological basis. These studies address questions about the thermal structure of the Arctic middle atmosphere, the dynamical processes acting therein, and of aerosols in the form of stratospheric background aerosol, polar stratospheric clouds, noctilucent clouds, and injected aerosols of volcanic or anthropogenic origin. Furthermore, the lidar is meant to work together with other remote sensing instruments, both ground- and satellite-based, and with balloon- and rocket-borne instruments performing in situ observations. The instrument is basically a twin lidar, using two independent power lasers and two tiltable receiving telescopes. The power lasers are Nd:YAG lasers emitting at wavelengths 1064, 532, and 355 nm and producing 30 pulses per second each. The power lasers are highly stabilized in both their wavelengths and the directions of their laser beams. The laser beams are emitted into the atmosphere fully coaxial with the line-of-sight of the receiving telescopes. The latter use primary mirrors of 1.8 m diameter and are tiltable within 30° off zenith. Their fields-of-view have 180 rad angular diameter. Spectral separation, filtering, and detection of the received photons are made on an optical bench which carries, among a multitude of other optical components, three double Fabry-Perot interferometers (two for 532 and one for 355 nm) and one single Fabry-Perot interferometer (for 1064 nm). A number of separate detector channels also allow registration of photons which are produced by rotational-vibrational and rotational Raman scatter on N₂ and N₂+O₂ molecules, respectively. Currently, up to 36 detector channels simultaneously record the photons collected by the telescopes. The internal and external instrument operations are automated so that this very complex instrument can be operated by a single engineer. Currently the lidar is heavily used for measurements of temperature profiles, of cloud particle properties such as their altitude, particle densities and size distributions, and of stratospheric winds. Due to its very effective spectral and spatial filtering, the lidar has unique capabilities to work in full sunlight. Under these conditions it can measure temperatures up to 65 km altitude and determine particle size distributions of overhead noctilucent clouds. Due to its very high mechanical and optical stability, it can also employed efficiently under marginal weather conditions when data on the middle atmosphere can be collected only through small breaks in the tropospheric cloud layers.     

The role of sodium bicarbonate in the nucleation of noctilucent clouds

It is proposed that a component of meteoric smoke, sodium bicarbonate (NaHCO₃), provides particularly effective condensation nuclei for noctilucent clouds. This assertion is based on three conditions being met. The first is that NaHCO₃ is present at sufficient concentration (10⁴ cm^–3) in the upper mesosphere between 80 and 90 km. It is demonstrated that there is strong evidence for this based on recent laboratory measurements coupled with atmospheric modelling. The second condition is that the thermodynamics of NaHCO₃(H₂O)_n cluster formation allow spontaneous nucleation to occur under mesospheric conditions at temperatures below 140 K. The Gibbs free energy changes for forming clusters with n = 1 and 2 were computed from quantum calculations using hybrid density functional/Hartree-Fock (B3LYP) theory and a large basis set with added polarization and diffuse functions. The results were then extrapolated to higher n using an established dependence of the free energy on cluster size and the free energy for the sublimation of H₂O to bulk ice. A 1-dimensional model of sodium chemistry was then employed to show that spontaneous nucleation to form ice particles (n > 100) should occur between 84 and 89 km in the high-latitude summer mesosphere. The third condition is that other metallic components of meteoric smoke are less effective condensation nuclei, so that the total number of potential nuclei is small relative to the amount of available H₂O. Quantum calculations indicate that this is probably the case for major constituents such as Fe(OH)₂, FeO₃ and MgCO₃.     

Experimental determination of saltating glass particle dispersion in a turbulent boundary layer

A horizontal saltation layer of glass particles in air is investigated experimentally over a flat bed and also over a triangular ridge in a wind tunnel. Particle concentrations are measured by light scattering diffusion (LSD) and digital image processing, and velocities using particle image velocimetry (PIV). All the statistical moments of the particle concentration are determined such as mean concentration, root mean square concentration fluctuations, skewness and flatness coefficients. Over the flat bed, it is confirmed that the mean concentration decreases exponentially with height, the mean dispersion height being a significant length scale. It is shown that the concentration distribution follows quite well a lognormal distribution. Over the ridge, measurements were made at the top of the ridge and in the cavity region and are compared with measurements without the ridge. On the hill crest, particles are retarded, the saltation layer decreases in thickness and concentration is increased. Downwind of the ridge, particle flow behaves like a jet, in particular no particle return flow is observed. Copyright © 2006 John Wiley & Sons, Ltd.     

C18固相膜萃取-气相色谱法测定饮用水中12种有机氯农药

利用C18固相萃取膜提取水样，气相色谱法（电子捕获检测器）测定饮用水中12种有机氯农药。对洗脱液、水样pH值、萃取压力等条件进行了优化选择，并与液-液萃取做了比较。结果表明，与液-液萃取相比，固相膜萃取具有操作简单、富集倍数高、节省溶剂和耗时短等优点，是萃取水中有机氯农药的有效方法。12种有机氯农药的回收率为85．97％～127．7％，相对标准偏差（RSD，n=5）为4．74％～12．2％，方法检出限为0．014～0．047μg/L。     

EFFECT OF FLOW CONDITIONS ON 3D MOVEMENT CHARACTERISTICS OF PARTICLES

1 INTRODUCTION The mechanism of particle movement in the flow is one of basic problems of sediment transport research. The conventional measurement approaches usually disturb the structure of the flow, consequently inducing errors. With the development of…     

Temporal-spatial variations of euphotic depth of typical lake regions in Lake Taihu and its ecological environmental significance

Euphotic depth can be defined as the portion of wa- ter column that supports the net primary productivity. Its lower end is the critical depth, namely, the depth measured when the daily net primary productivity is zero[1]. In the ecosystems of oceans, lakes and rivers, phytoplankton live in the euphotic depth and euphotic depth is usually taken as the lower boundary, when studying the primary productivity and biomass of phytoplankton; therefore the corresponding depth is sometimes called the t…     

Correlation of atmospheric visibility with chemical composition of Kaohsiung aerosols

The objective of this study was to investigate the correlation of visibility with chemical composition of Kaohsiung aerosols. Daytime visibility was observed around noon at two observation sites in metropolitan Kaohsiung, Taiwan in the years of 1999 and 2000. Both seasonal and diurnal variation patterns of visibility were observed in the region. Ambient aerosols were sampled and analyzed for 11 constituents, including water-soluble ionic species (Cl⁻, NO₃⁻, SO₄⁻², NH₄⁺, K⁺, Na⁺, Ca⁺², and Mg⁺²) and carbonaceous contents (OC, EC, and TC), to characterize the chemical composition of Kaohsiung aerosols. Furthermore, a stepwise multiple linear regression model was developed to elucidate the influence of aerosol species on visibility impairments. The results showed that sulfate was the dominant species that affected both light scattering coefficient and visibility. On average, the percentage contributions of visibility degrading species to light scattering coefficient were 29% for sulfate, 28% for nitrate, 22% for total carbon, and 21% for PM_2.5-remainder. An empirical regression model of visibility based on sulfate, nitrate, and relative humidity was also developed. The model showed that sulfate in PM_2.5 was the most sensitive species to visibility variation, suggesting that the reduction of sulfate in PM_2.5 could effectively improve the visibility of metropolitan Kaohsiung. During the investigation period, an event of Asian dusts intruded metropolitan Kaohsiung and dramatically increased the aerosol loadings, especially in the coarse particles. However, local visual air quality did not degrade accordingly during the Asian dust event because both visibility and light scattering coefficient are affected mainly by the fine particles. The results are discussed in detail in the paper.     

Fog and rain water chemistry at Mt. Fuji: A case study during the September 2002 campaign

Measurements of fog and rain water chemistry at the summit of Mt. Fuji, the highest peak in Japan, as well as at Tarobo, the ESE slope of Mt. Fuji in September 2002. The pH of fog and rain water sampled at Mt. Fuji varied over a range of 4.0–6.8. Acidic fogs (pH < 5.0) were observed at the summit when the air mass came from the industrial regions on the Asian continent. The ratio of [SO₄²⁻]/[NO₃⁻] in the fog water was lower at Tarobo than at the summit. High concentrations of Na⁺ and Cl⁻ were determined in the rain water sampled at the summit, possibly because of the long-range transport of sea-salt particles raised by a typhoon through the middle troposphere. The vertical transport of sea-salt particles would influence the cloud microphysical properties in the middle troposphere. Significant loss of Mg²⁺ was seen in the rain water at the summit. The concentrations of peroxides in the fog and rain water were relatively large (10–105 μM). The potential capacity for SO₂ oxidation seems to be strong from summer to early autumn at Mt. Fuji. The fog water peroxide concentrations displayed diurnal variability. The peroxide concentrations in the nighttime were significantly higher than those in the daytime.