国际地磁参考场在我国地磁基础研究中的应用

国际地磁参考场资料在我国得到广泛应用。利用国际地磁参考场资料，我国学者研究了高斯分析、地球磁场模型及其源场可能位置、重磁关系、核幔耦合、地磁场能量、地球非偶极子磁场西向漂移等。在绘制中国地磁等值图中也利用了某些国际地磁参考场资料。     

Do the Austrian blackfly fauna (Diptera: Simuliidae) support the typological approach of the EU water framework directive?

The Austrian blackfly fauna were analysed with regard to spatial (ecoregions, bioregions), vertical (altitude classes) and longitudinal zonation characteristics [stream order, biocoenotic (= fish) regions] on the basis of 2600 investigation sites. Of a total of 45 species recorded, Simulium ornatum, S. variegatum, S. argyreatum and S. reptans are the most common and most frequently distributed species, occurring in 60% of the investigated sites. Although the Austrian blackfly fauna seem to be quite well documented (on average one investigation site per 32 km²) the jackknife analyses indicates that there are still some fauna deficits. Whereas the species diversity of the main ecoregions is quite similar, the number of species differs clearly between the bioregions. Within the typological context of the Water Framework Directive, the Austrian Simuliidae confirm the bioregions as the most useful spatial units for river typology. A further optimisation in predicting a target list of blackfly species of a site can be achieved by subdividing the bioregions into either catchment area and altitude classes or into longitudinal zonation types (biocoenotic regions).     

GIS专题数据综合的研究

随着GIS技术在各种应用领域的推广使用，各领域的专业数据与G1S的空间数据相结合，形成描述特定地理现象的各种专题数据。与GIS空间数据一样，专题数据的应用也由微观的、较为详细地描述小区域地理现象特征，转向宏观的、较为概略地描述较大范围地理现象特征，这是专题数据综合的主要任务。该文在讨论GIS专题数据类型及特征的基础上，着重分析了专题数据综合的基本类型，并提出了专题数据综合的概念模型，为GIS专题数据自动综合的实施提供理论依据和实施方案。     

海拉尔盆地贝尔凹陷的油气运聚分析

海拉尔盆地贝尔凹陷是一个以白垩系沉积为主的陆相断陷区。采用条件分析法,对贝尔凹陷的油气运聚条件及其成藏的基本模式进行了系统研究,认为,贝尔凹陷在剖面上有3套成藏组合,其中中部成藏组合最佳;在平面上可分为5个运聚系统,其中以位于凹陷西北部的3个系统为最佳。该凹陷不同构造部位的运聚条件相差较大,生烃洼陷深部位的油气运移以砂岩储集层和断裂为主要输导通道,构造高部位的油气运移以断裂为主,而两者之间的油气输导则以不整合面和断裂为主。在油气运聚和成藏模式分析的基础上,认为贝尔凹陷油气运聚的有利条件主要包括生油凹陷有充足的油源、生油区内有继承性发育的圈闭构造以及各运聚要素间存在良好的时空配置关系3个方面。     

变参考慢度Born近似傅氏偏移

针对常规Born近似傅氏偏移方法对于剧烈横向变速介质不能精确成像的状况而提出了变参考慢度Born近似傅氏偏移，理论上解决了任意速度变化地质模型的偏移成像问题。此外，为进一步提高复杂地层的成像精度和波场延拓算子的稳定性，对散射波场的计算公式作了改进。将改进的方法运用于盐丘模型的正演和偏移试验，并与常规Born近似偏移方法相比较，可明显看出变参考慢度Born近似傅氏偏移方法在效果上要优于后者，其处理速度横向变化的能力大大增强。     

基于GPS基准站网的GPS测量

采用基于GPS基准网的GPS测量可以提高GPS测量的可靠性和准确性 ,可以消除和减小GPS测量观测值中与时间和空间相关的大气误差和轨道误差的影响 ,使中、长距离快速静态定位和RTK动态定位成为现实 ,还具有可直接得到WGS84Z坐标等优点。本文介绍基于GPS基准站网的GPS测量 ,简要地论述GPS虚拟参考站法VRS和区域改正数法FKP的原理、方法和特点 ,以及目前实施中存在的一些问题     

Laser Ablation ICP-MS Analysis of Geological Materials Prepared as Lithium Borate Glasses

A simple, rapid and precise method is described for determining trace elements by laser ablation (LA)-ICP-MS analysis in bulk geological materials that have been prepared as lithium borate glasses following standard procedures for XRF analysis. This approach reliably achieves complete sample digestion and provides for complementary XRF and LA-ICP-MS analysis of a full suite of major and trace elements from a single sample preparation. Highly precise analysis is enabled by rastering an ArF excimer laser (λ= 193nm) across fused samples to deliver a constant sample yield to the mass spectrometer without inter-element fractionation effects during each analysis. Capabilities of the method are demonstrated by determination of twenty five trace elements (Sc, Ti, V, Ga, Rb, Sr, Y, Zr, Nb, Cs, Ba, REE, Hf, Ta, Pb, Th and U) in a diverse range of geological reference materials that includes peridotites, basalts, granites, metamorphic rocks and sediments. More than 90% of determinations are indistinguishable from published reference values at the 95% confidence level. Systematic bias greater than 5% is observed for only a handful of elements (Zr, Nb and U) and may be attributed in part to inaccurate calibration values used for the NIST SRM 612 glass in the case of Zr and Nb. Detection limits for several elements, most notably La, are compromised at ultra-trace levels by impurities in the lithium borate flux but can be corrected for by subtracting appropriate procedural blanks. Reliable Pb analysis has proved problematic due to variable degrees of contamination introduced during sample polishing prior to analysis and from Pt-crucibles previously used to fuse Pb-rich samples. Scope exists for extending the method to include internal standard element/isotope spiking, particularly where integrated XRF analysis is not available to characterise major and trace elements in the fused lithium borate glasses prior to LA-ICP-MS analysis.     

A Reappraisal of Rb, Y, Zr, Pb and Th Values in Geochemical Reference Material BHVO-1

The geochemical reference material BHVO-1 was analysed by a variety of techniques over a six year period. These techniques included inductively coupled plasma-mass spectrometry and atomic emission spectroscopy (ICP-MS and ICP-AES, respectively), laser ablation ICP-MS and spark source mass spectroscopy. Inconsistencies between the published consensus values reported by Gladney and Roelandts (1988, Geostandards Newsletter) and the results of our study are noted for Rb, Y, Zr, Pb and Th. The values reported here for Rb, Y, Zr and Pb are generally lower, while Th is higher than the consensus value. This is not an analytical artefact unique to the University of Notre Dame ICP-MS facility, as most of the BHVO-1 analyses reported over the last ten to twenty years are in agreement with our results. We propose new consensus values for each of these elements as follows: Rb = 9.3 ± 0.2 μg g-1 (compared to 11 ± 2 μg g-1), Y = 24.4 ± 1.3 μg g-1 (compared to 27.6 ± 1.7 μg g-1), Zr = 172 ± 10 μg g-1 (compared to 179 ± 21 μg g-1), Pb = 2.2 ± 0.2 μg g-1 (compared to 2.6 ± 0.9 μg g-1) and Th = 1.22 ± 0.02 μg g-1 (compared to 1.08 ± 0.15 μg g-1).     

Geoid determination using adapted reference field, seismic Moho depths and variable density contrast

 The traditional remove-restore technique for geoid computation suffers from two main drawbacks. The first is the assumption of an isostatic hypothesis to compute the compensation masses. The second is the double consideration of the effect of the topographic–isostatic masses within the data window through removing the reference field and the terrain reduction process. To overcome the first disadvantage, the seismic Moho depths, representing, more or less, the actual compensating masses, have been used with variable density anomalies computed by employing the topographic–isostatic mass balance principle. In order to avoid the double consideration of the effect of the topographic–isostatic masses within the data window, the effect of these masses for the used fixed data window, in terms of potential coefficients, has been subtracted from the reference field, yielding an adapted reference field. This adapted reference field has been used for the remove–restore technique. The necessary harmonic analysis of the topographic–isostatic potential using seismic Moho depths with variable density anomalies is given. A wide comparison among geoids computed by the adapted reference field with both the Airy–Heiskanen isostatic model and seismic Moho depths with variable density anomaly and a geoid computed by the traditional remove–restore technique is made. The results show that using seismic Moho depths with variable density anomaly along with the adapted reference field gives the best relative geoid accuracy compared to the GPS/levelling geoid. Received: 3 October 2001 / Accepted: 20 September 2002 Correspondence to: H.A. Abd-Elmotaal     

国家地理空间信息基准框架工程建设

提出了国家地理空间信息基准框架内改进与更新原有的大地坐标基准、高程基准和重力基准的建设道路及解决原则。