Discussion: A review on the behaviour of helical piles as a potential offshore foundation system

Abstract

Helical piles have emerged as an attractive foundation system for offshore applications with renewed interest from the offshore community. Significant research gap currently exists in transferring this technology offshore and this paper discusses how existing and emerging knowledge can be successfully used to bridge some of the gaps. We focus on the Coupled Eulerian Lagrangian (CEL) large deformation finite element (LDFE) modelling technique that is commercially available and can be used to model the three-dimensional installation process with consideration of strain rate and softening effects in soft offshore clays. A helical pile of L?=?7.5?m long is modelled with one or two large-diameter helices (D?=?2?m) attached to a central shaft of d?=?0.5?m in diameter.The net effect of strain rate and softening is to increase the installation torque. The measured torque is within the range of 200–400?kN.m for the offshore clay and the pile geometry studied. Additional helices increase the uplift force but to a lesser degree than that of the measured torque. Remoulding induced strength reduction is found to be within the range of 25–33% of the intact clay strength. Issues of extracting and reusing offshore helical pile foundations are discussed.     

城市与工程测量EDM导线技术标准的分析

基于导线测量误差理论与电磁测距(EDM)导线的特性,分析讨论了城市与工程测量EDM导线的各项技术参数,提出了各级EDM导线技术标准的建议,通过计算验证所给出的这些技术指标是合理可靠的。     

Jason-1: Assessment of the System Performances

On 7 December 2001, Jason-1 was successfully launched by a Boeing Delta II rocket from the Vandenberg Air Force Base, California. The Jason-1 satellite will maintain the high accuracy altimeter service provided since 1992 by TOPEX/Poseidon (T/P), ensuring the continuity in observing and monitoring the Ocean Dynamics (intraseasonal to interannual changes, mean sea level, tides, etc.). Despite one-fourth the mass and power, the Jason-1 system has been designed to have basically the same performance as T/P, measuring sea surface topography at a centimetric level. This new CNES/NASA mission also provides near real-time data for sea state and ocean forecast. The first two months of the Jason-1 mission have been dedicated to the assessment of the overall system. The goals of this assessment phase were:

1. To assess the behavior of the spacecraft at the platform and payload levels (Jason-1 being the first program to call on the PROTEUS versatile multimission platform for Low and Medium Earth Orbit Missions developed in partnership between Alcatel Space and CNES);

2. To verify that platform performance requirements are met with respect to Jason-1 requirements;

3. To verify that payload instruments performance requirements evaluated at instrument level are met;

4. To assess the performance of the Jason-1 Ground System.

This article will display the main outputs of the assessment of the system. It will demonstrate that all the elements of the onboard and ground systems are within the specifications. Provision of data to the Jason-1 Science Working Team started at the end of March 2002. This is the goal of a six-month phase after closure of the initial assessment phase to derive the error budget of the system in terms of altimetry user products.     

Multifractal filtering method for extraction of ocean from remotely sensed imagery

Traditional methods of extracting the ocean wave eddy information from remotely sensed imagery mainly use the edge detection technology such as Canny and Hough operators. However, due to the complexities of ocean eddies and image itself, it is sometimes difficult to successfully detect ocean eddies using these methods. A mnltifractal filtering technology is proposed for extraction of ocean eddies and demonstrated using NASA MODIS, SeaWiFS and NOAA satellite data set in the typical area, such as ocean west boundary current. Results showed that the new method has a superior performance over the traditional methods.     

海岸工程中海浪数值模拟和环境参数选取的进展

主要介绍了我国近的来在海岸工程设计，建设中有关海浪数值模拟及环境参数选取方面的研究进展。     

21世纪的大洋钻探——IODP

人类在地球科学方面已取得了相当大的成就,但就研究范围而言,却仅仅触及了地球的表层。IODP是一项国际性的大洋钻探计划,预期将于2003年10月正式开始实施。IODP将运用新的科学方法、科技设备,使人类对大洋底乃至整个地球系统得出更深、更广的认识。简单介绍了IODP的由来、组织机构、钻井技术、前期科学目标及中国的深海研究现状,提出中国参与IODP的必要性和可行性。通过了解21世纪的IODP在研究课题及研究技术方面的最新动态,不仅有助于我国根据国际动态调整深海研究的方向,制定符合我国需求的研究计划,而且有助于我国把握参与21世纪IODP的时机和策略,迎接“海洋世纪”的挑战,从而逐步实现“从地学大国走向地学强国”的目标。     

辽东湾葵花岛构造区浅层气分布特征、成因探讨及工程影响

揭示了葵花岛构造区浅层气规模小、埋藏浅、分布散、压力低、储层松散等分布特点,根据沉积环境和地质特征,推测浅层气为生物甲烷气,但并不完全排除是热生甲烷次生气藏的可能性,探讨了浅层气潜在的工程危害并提出相应防治措施,为今后海洋工程建设提供科学依据。     

MERIS遥感数据特性及应用

中等分辨率成像频谱仪(M ER IS)是搭载于由欧洲空间局(ESA)发射的迄今为止最大的综合性环境卫星ENV ISAT-1上的主要传感器,由法国和荷兰共同研制,是目前水色传感器中最有优势的传感器之一。文中主要介绍了M ER IS遥感数据的特点,与M OD IS、SeaW IFS传感器相比,M ER IS在波段设置与辐射灵敏度等方面都有较大的优势,更适合于海洋水色的应用。针对M ER IS的波段设置,重点介绍了M ER IS数据在海洋水色的应用范围与应用原理,并简要介绍其在大气与陆地上的应用。     

SAS测量水体表观光学参数的方法

SeaWiFS航空模拟器（SAS）是专门为在水面之上测量水体表观光学参数的现场设备。文章在介绍SAS现场测量以及数据处理基本方法的基础上，分析了2002年黄海试验SAS的应用效果，并与剖面法测量数据进行了比对。     

厦门港疏浚弃土吹填造陆物理模型试验研究

通过厦门港潮汐水流整体物理模型试验，掌握了厦门港十万吨级深水航道二期工程疏浚弃土吹填造陆各方案实施前后港池航道水流流态，为规划设计单位和决策部门利用疏浚弃土吹填造陆提供可靠的科学依据，试验结果表明，海沧吹填工程可作为一期吹填方案，鸡屿西吹填造陆工程可作为海沧吹填工程的后续工程，仅从水流角度考虑，象鼻嘴吹填造陆方案1是可行的。