湖泊水下数字高程模型建模方法及应用模型

介绍了当前湖泊水下地形测量的一般方法和作业过程。针对逐点插入构建不规则三角网算法，本文提出了效率改正算法和格网索引号快速计算算法。基于不规则三角网，给出了湖泊水下数字高程模型的一般应用模型——任意点高程计算、填挖方计算模型及等深线计算模型。     

数字路线地质调查与数字填图方法

数字地质填图是基于数字填图系统(RGMAP)进行地质调查的一种新方法.从野外数字路线地质调查的角度,结合150000崇阳县幅数字填图实战经验,探讨了观察路线布置的原则和方法、PRB数字填图技术和PRB过程的基本概念,数字填图的一般工作方法和编录要求等.在此基础上对数字填图方法的长处和局限性进行了讨论.     

Mapgis在地质学中的应用

简要讨论了Mapgis的主要功能，重点阐述了Mapgis的地质制图技术、空间分析技术以及二次开发能力在地质学领域中的应用，并举例论述之。Mapgis的地质制图技术将纷繁复杂的传统地质制图过程简化，而且美观精确；空间分析技术可以将矢量数据和栅格数据综合制作出各种图形和图象文件，方便分析；地质工作者也可以运用Mapgis的二次开发能力来开发面向特定领域的系统。     

处理DEM中闭合洼地和平坦区域的一种新方法

数字高程模型(DEM)中的闭合洼地和平坦区域影响着流域排水网络的自动提取.目前已提出很多方法来处理这两种地形,但均针对已经形成的DEM单元网格进行处理,结果往往生成伪河道及平行河道.在回顾分析了这些方法存在的问题后,提出了一种新的处理方法,该法认为DEM中的闭合洼地和平坦区域是由于低质量的资料输入、生成DEM时的内插误差等引起的.通过增加输入地形高程信息,避免了DEM中平坦区域和闭合洼地的生成,从而使由DEM生成的河网与实际河网能够精确拟合.实例分析表明,该方法效果明显.     

库尔勒数字地震台台基噪声分析

选取库尔勒地震台FBS—3数字地震仪不同时段的无震记录资料，运用傅里叶变换对其台基噪声进行频谱分析，并计算台基的平均噪声水平及仪器的实际动态范围。库尔勒地震台数字地震仪台基噪声主要来自随机干扰，噪声频段相对稳定，噪声幅度随时段有所变化。观测系统实际动态范围符合数字地震仪架设的要求。     

数字化气氡观测干扰因素的分析研究

在进行地下流体数字化气氡观测及将观测资料应用于震情分析的过程中 ,发现某些干扰因素对数字化气氡观测和水氡的影响不同。在目前所用观测仪器和方法的条件下 ,气温对气氡值的影响系数为 - 0 4 % /℃ ;气压对气氡测值的影响系数为 0 1% /hPa ;不同类型的气水分离装置对气氡观测的影响很显著 ;同一含水层的井 (泉 )出水量的短期变化可引起观测水井流量的变化 ,但对气氡测值影响不显著 ;气氡测值对逸出气流量的变化反映不明显 ;逸出气含有杂质及气路泄漏等均会引起测值的下降。结合仪器的工作原理 ,对干扰产生的机制以及排除的方法进行了讨论     

Testing a model for predicting the timing and location of shallow landslide initiation in soil‐mantled landscapes

The growing availability of digital topographic data and the increased reliability of precipitation forecasts invite modelling efforts to predict the timing and location of shallow landslides in hilly and mountainous areas in order to reduce risk to an ever‐expanding human population. Here, we exploit a rare data set to develop and test such a model. In a 1·7 km² catchment a near‐annual aerial photographic coverage records just three single storm events over a 45 year period that produced multiple landslides. Such data enable us to test model performance by running the entire rainfall time series and determine whether just those three storms are correctly detected. To do this, we link a dynamic and spatially distributed shallow subsurface runoff model (similar to TOPMODEL) to an in?nite slope model to predict the spatial distribution of shallow landsliding. The spatial distribution of soil depth, a strong control on local landsliding, is predicted from a process‐based model. Because of its common availability, daily rainfall data were used to drive the model. Topographic data were derived from digitized 1 : 24 000 US Geological Survey contour maps. Analysis of the landslides shows that 97 occurred in 1955, 37 in 1982 and ?ve in 1998, although the heaviest rainfall was in 1982. Furthermore, intensity–duration analysis of available daily and hourly rainfall from the closest raingauges does not discriminate those three storms from others that did not generate failures. We explore the question of whether a mechanistic modelling approach is better able to identify landslide‐producing storms. Landslide and soil production parameters were ?xed from studies elsewhere. Four hydrologic parameters characterizing the saturated hydraulic conductivity of the soil and underlying bedrock and its decline with depth were ?rst calibrated on the 1955 landslide record. Success was characterized as the most number of actual landslides predicted with the least amount of total area predicted to be unstable. Because landslide area was consistently overpredicted, a threshold catchment area of predicted slope instability was used to de?ne whether a rainstorm was a signi?cant landslide producer. Many combinations of the four hydrological parameters performed equally well for the 1955 event, but only one combination successfully identi?ed the 1982 storm as the only landslide‐producing storm during the period 1980–86. Application of this parameter combination to the entire 45 year record successfully identi?ed the three events, but also predicted that two other landslide‐producing events should have occurred. This performance is signi?cantly better than the empirical intensity–duration threshold approach, but requires considerable calibration effort. Overprediction of instability, both for storms that produced landslides and for non‐producing storms, appears to arise from at least four causes: (1) coarse rainfall data time scale and inability to document short rainfall bursts and predict pressure wave response; (2) absence of local rainfall data; (3) legacy effect of previous landslides; and (4) inaccurate topographic and soil property data. Greater resolution of spatial and rainfall data, as well as topographic data, coupled with systematic documentation of landslides to create time series to test models, should lead to signi?cant improvements in shallow landslides forecasting. Copyright © 2003 John Wiley & Sons, Ltd.     

The design of post‐mining landscapes using geomorphic principles

Nature can provide analogues for post‐mining landscapes in terms of landscape stability and also in terms of the rehabilitated structure ‘blending in’ with the surrounding undisturbed landscape. In soil‐mantled landscapes, hillslopes typically have a characteristic pro?le that has a convex upper hillslope pro?le with a concave pro?le lower down the slope. In this paper hillslope characteristic form is derived using the area–slope relationship from pre‐mining topography at two sites in Western Australia. Using this relationship, concave hillslope pro?les are constructed and compared to linear hillslopes in terms of sediment loss using the SIBERIA erosion model. It is found that concave hillslopes can reduce sediment loss by up to ?ve times that of linear slopes. Concave slopes can therefore provide an alternative method for the construction of post‐mining landscapes. An understanding of landscape geomorphological properties and the use of erosion models can greatly assist in the design of post‐mining landscapes. Copyright © 2003 John Wiley & Sons, Ltd.     

数字城市规划系统关键技术分析

分析了数字城市规划系统的业务需求，介绍了其基础数据更新、工作流、无纸化办公、历史空间信息管理等主要关键技术，并对其进行了讨论。     

采用Creator生成三维地形

介绍了Creator地形转换的四种算法，讨论了在Creator中生成地形的过程，并以福建省闽清地区水口店为研究区域，建立直观性的、真实性的三维地形。