塑性岩体与逆冲构造变形关系讨论——库车坳陷西部实例分析

在冲断构造分析过程中 ,常常把塑性岩体仅仅作为滑脱层看待 ,忽略了一些地区塑性变形与冲断构造变形的复合作用。根据露头、钻井、地震等资料 ,应用平衡剖面等技术对库车坳陷西部的构造变形进行了恢复分析 ,发现库车坳陷西部的下第三系盐、膏、泥等塑性体受重力和构造应力联合作用发生了复杂的变形。以往单纯用冲断构造模式分析其成因机制 ,没能科学地反映中生界与新生界之间的变形缩短量的差异 ,通过塑性体的底辟变形和滑脱变形依存关系的剖析 ,能够恢复库车坳陷西部构造演化过程 ,进而为油气勘探提供指导。     

运用层序不对称性分析海平面变化特征

目前研究海平面变化的方法尚不能精确确定海平面变化，对记录海平面变化的沉积体或层序物质组成及结构特点的研究尚显薄弱。在分析层序不对称性与海平面变化的关系基础，提出层序不对称系数S0，认为海平面的升降变化对浅水沉积区影响显著，其结果必然造成层序S0的增加；海平面的升降变化对沉水沉积区影响不大，层序S0较为恒定。对进行详细研究中扬子区S0分布特点，运用S0曲线计算了中扬子区海平面变化特点，并与其他方法进行对比，认为可以用S0判断水体相对深浅，分析海平面变化。     

鄂尔多斯盆地上古生界高分辨率层序地层分析

按基准面旋回原理，将鄂尔多斯盆地上古生界本溪组（C2b)、太原组（P1t）、山西组(P1s)和下石盒子组（P1xs)划分为3个超长期、8个长期、19个中期和62个短期旋回层序：较为详细地介绍了各级别层序的结构类型、叠加样式和沉积演化序列；建立以长期旋回层序为年代地层框架，中期旋回层序为等时地层对比单元的层序的地层格架；并讨论高分辨率层序地层与天然气藏的关系。     

Topography as a major factor in the development of arcuate thrust belts: insights from sandbox experiments

We have used sandbox experiments to investigate and to illustrate the effects of topography upon the development of arcuate thrust belts. In experiments where a sand pack shortened and thickened in front of an advancing rectilinear piston, the geometry of the developing thrust wedge was highly sensitive to variations in surface topography. In the absence of erosion and sedimentation, the surface slope tended to become uniform, as predicted by the theory of critical taper. Under these conditions, the wedge propagated by sequential accretion of new thrust slices. In contrast, where erosion or sedimentation caused the topographic profile to become irregular, thrusts developed out of sequence. For example, erosion throughout a hinterland caused underlying thrusts to remain active and inhibited the development of new thrusts in the foreland. Where initial topography was irregular in plan view, accreting thrusts tended to be arcuate. They were convex towards the foreland, around an initially high area; concave towards the foreland, around an initially low area. Initial plateaux tended to behave rigidly, while arcuate thrust slices accreted to them. Thrust motions were radial with respect to each plateau. Within transfer zones to each side, fault blocks rotated about vertical axes and thrust motions were oblique-slip. At late stages of deformation, the surface slope of the thrust wedge tended towards a uniform value. Initial mountains of conical shape (representing volcanoes) also escaped deformation, except at depth, where they detached. Arcuate thrust slices accreted to front and back. Where a developing thrust wedge was subject to local incision, accreting thrust slices dipped towards surrounding areas of high topography, forming Vs across valleys.Arcuate structural patterns are to be found around the three highest plateaux on Earth (Tibet, Pamirs and Altiplano) and around the Tromen volcanic ridge in the Neuquén Basin of northern Patagonia. We infer that these areas behaved in quasi-rigid fashion, protected as they were by their high topography.     

西藏层序地层研究进展

迄今为止，西藏区内所开展的层序地层分析主要涉及到中生代的二级或三级层序。基于露头剖面的沉积相、古生物、磁性地层以及地质事件的综合研究，探讨了三叠纪、侏罗纪和白垩纪的层序地层模式及其形成机制。现今所取得的进展主要表现在3个方面：①初步建立了区内中生代层序地层年代格架；②不同时代、不同类型盆地中的层序数量、结构与层序类型具有较大的差异；③层序地层与磁性地层的结合研究，取得了重要的成果。未来区内的层序地层研究应在3个方面展开；①高分辨率层序地层研究，树立株罗纪－第三纪海平面变化曲线；②探索层序地层填图新方法；③多岛弧造山模式和多机制的隆升模式等大陆动力学问题也是层序地层所遇到的新挑战。     

南秦岭横丹浊积岩系——晚古生代发育于扬子板块被动陆缘上的弧前盆地充填物

南秦岭横丹浊积岩系是一套巨厚的浊流沉积,以向南或南东倾的单斜构造产出。由下而上,该沉积层序包括深水盆地、深水浊积扇和斜坡水道3个相序。相应地,沉积物粒度变粗,厚度变大,火山质组分含量增加,凝灰层大量发育,表明横丹浊积岩系为活动型浊积岩;其古水流方向为NNW—NNE向,物源区为南侧的碧口火山岩系。另外,横丹浊积岩系内还见石英岩、重结晶大理岩成分的砾石,说明其物源还包括被动陆缘环境的沉积物。相序、组构、沉积特征和物源区综合分析表明,横丹浊积岩系为弧前盆地充填物。构筑这一弧前盆地的动力学机制是洋壳板块向南俯冲于扬子板块被动陆缘之下,时代可能晚于中晚泥盆世。     

江西瑞昌1995年ML4.9级地震前后九江地震台倾斜固体潮汐变化分析

通过月整点值数据文件和滑动值数据文件这两种数据处理形式。对九江台地倾斜资料进行调和分析计算。分析了M2潮汐因子与瑞昌ML4.9级地震的关系。认为存在震前短临异常或震后异常，并与趋势异常得到相互印证。     

Earthquake—generating Structure Revealed by 1999 Sichuan mianzhu Earthquake Sequence with Ms=5.0

Through the accurate determination of hypocenter location,the measurement of the main focal mechanism solutions and the analyses of time dependent processes for Sichuan Mianzhu earthquake sequence with Ms=5.0 occurred along the middle segment of Longmenshan fault zone on November 30,1999,the distribution of focal depth section,the stress relase and seismicity features are given to reveal the earthquake-geneating structure of the earthquake sequence.The obtained results show the activity features for this sequence as follows:(1) There is no obvious foreshock,the accumulated strain energy releases in nearly pulse way,fluctuation of the seismic activity level is not quite evident during the duration of the sequence,and the statistical relation between the large events and the small events is less compatible with the traditional G-R estimation;(2) The epicenters of the earthquake sequence are not distributed on the main Longmenshan piedmont faults emerging out ground,but near the hidden Longmenshan piedmont faults.The direction of epicenter distribution is not very coincident with the fault strikes.The microscopic epicenters are relatively far from the macroscopic epicenters,The focal depths range from 5km to 16km;(3) The fractures of focal fault plane with the NE strike appear out the strike-slip displacement with a few overthrust components under the major principal compressive stress of NNE direction.From these,we consider it should be paid more attentions to the underground hidden faults near the ground fault zone on a large scale for their generating earthquake risk.     

Models of passive margin inversion: implications for the Rhenohercynian fold-and-thrust belt, Belgium and Germany

Positive tectonic inversion is related to the transmission of compressional stresses along a décollement into the foreland of an orogenic zone. This stress and strain concentration in regions remote from the main orogenic front is commonly related to the presence of pre-existing rheological heterogeneities such as normal syn-depositional faults. During inversion, these pre-existing normal faults are reactivated as reverse faults. Tectonic inversion in the Rhenohercynian fold-and-thrust belt during the Variscan Orogeny shows that inversion is likely synchronous with the onset of collision in the hinterland. Here, we present the results of a simplified thermo-mechanical model (STM) which allows one to study strain partitioning between two orogenic zones. We show that, if the two orogenic zones have the same mechanical properties, the viscosity of the décollement, which links them, controls the initial strain partitioning. During subsequent finite shortening, erosional processes determine the partitioning of strain rate. The presence of a weak structure in the inverted zone and of a low-viscosity décollement leads to initial strain concentration in the inverted track rather than in the collision zone and a progressive decrease in strain partitioning between the two orogenic zones. The STM results are in good agreement with results of a 2D finite-element model. We conclude that, in the western part of the Rhenohercynian Massif, simultaneous uplift and deformation within the Mid-German Crystalline Rise (the main collision zone) and the Ardenne Anticlinorium (the inverted zone) lead to interpreting this orogenic event as a case of vice tectonic rather than the propagation of a ‘wave of folding’ towards the Variscan front, as suggested by previous authors.