台北盆地构造特征及形成机制探讨

台北盆地位于台湾造山带的北部,它的形成有其特殊的机制而不同于一般意义上由于造山带的垮塌直接导致的盆地。钻井、地震勘探等资料表明,控制盆地形成的山脚断层并不是一条完整的正断层,而是由 3个段落组成,每个段落控制 1个沉积中心,彼此之间没有沟通。山脚断层各段落的活动性并不相同,向NE方向随时间逐渐增强,目前最为活动的段落集中在中段和北段,南段已不活动。台北盆地并不是一个孤立发育的盆地,是与金山断层东南的大屯火山群同时陷落的,具有一致的地球物理场背景、沉降规模以及正断层活动,广义的台北盆地从沉降范围和机制上还应该包括金山断层以南的大屯火山群。盆地周围发育了一系列的火山 (群),由于盆地的发育是紧随这些火山主要活动之后的,盆地的形成与周围火成活动有着必然联系,一些地球物理资料和盆地内的构造发育及沉积迁移特征表明,台北盆地的发育是深部岩浆体的冷却收缩所致。台北盆地深部存在与大屯火山群深部相通的岩浆体,岩浆体的冷却由南向北迁移     

Pre-eruptive and syn-eruptive conditions in the Black Butte, California dacite: Insight into crystallization kinetics in a silicic magma system

A series of experiments and petrographic analyses have been run to determine the pre-eruption phase equilibria and ascent dynamics of dacitic lavas composing Black Butte, a dome complex on the flank of Mount Shasta, California. Major and trace element analyses indicate that the Black Butte magma shared a common parent with contemporaneously erupted magmas at the Shasta summit. The Black Butte lava phenocryst phase assemblage (20 v.%) consists of amphibole, plagioclase (core An_77.5), and Fe–Ti oxides in a fine-grained (< 0.5 mm) groundmass of plagioclase, pyroxene, Fe–Ti oxides, amphibole, and cristobalite. The phenocryst assemblage and crystal compositions are reproduced experimentally between 890 °C and 910 °C, ≥ 300 MPa, X_H2O = 1, and oxygen fugacity = NNO + 1. This study has quantified the extent of three crystallization processes occurring in the Black Butte dacite that can be used to discern ascent processes. Magma ascent rate was quantified using the widths of amphibole breakdown rims in natural samples, using an experimental calibration of rim development in a similar magma at relevant conditions. The majority of rims are 34 ± 10 μm thick, suggesting a time-integrated magma ascent rate of 0.004–0.006 m/s among all four dome lobes. This is comparable to values for effusive samples from the 1980 Mount St. Helens eruption and slightly faster than those estimated at Montserrat. A gap between the compositions of plagioclase phenocryst cores and microlites suggests that while phenocryst growth was continuous throughout ascent, microlite formation did not occur until significantly into ascent. The duration of crystallization is estimated using the magma reservoir depth and ascent rate, as determined from phase equilibria and amphibole rim widths, respectively. Textural analysis of the natural plagioclase crystals yields maximum growth rates of plagioclase phenocryst rims and groundmass microlites of 8.7 × 10^− 8 and 2.5 × 10^− 8 mm/s, respectively. These rates are comparable to values determined from time-sequenced samples of dacite erupted effusively from Mount St. Helens during 1980 and indicate that syneruptive crystallization processes were important during the Black Butte eruptive cycle.     

Equilibrium and disequilibrium degassing of a phonolitic melt (Vesuvius AD 79 “white pumice”) simulated by decompression experiments

Equilibrium and disequilibrium degassing of a volatile phase from a magma of K-phonolitic composition was investigated to assess its behavior upon ascent. Decompression experiments were conducted in Ar-pressurized externally heated pressure vessels at superliquidus temperature (1050 °C), in the pressure range 10–200 MPa using pure water as fluid phase. All experiments were equilibrated at 200 MPa and then decompressed to lower pressures with rates varying from 0.0028 to 4.8 MPa/s. Isobaric saturation experiments were performed at the same temperature and at 900–950 °C to determine the equilibrium water solubility in the pressure range 30–250 MPa. The glasses obtained from decompression experiments were analyzed for their dissolved water content, vesicularity and bubble size distribution. All decompressed samples presented a first event of bubble nucleation at the capsule–melt interface. Homogeneous bubble nucleation in the melt only occurred in fast-decompressed experiments (4.8 and 1.7 MPa/s), for ΔP ≅ 100 MPa. For these decompression rates high water over-saturations were maintained until a rapid exsolution was triggered at ΔP > 150 MPa. For slower rates (0.0028, 0.024, 0.17 MPa/s) the degassing of the melt took place by diffusive growth of the bubbles nucleating at the capsule–melt interface. This process sensibly reduced water over-saturation in the melt, preventing homogeneous nucleation to occur. For decompression rates of 0.024 and 0.17 MPa/s low water over-saturations were attained in the melt, gradually declining toward equilibrium concentrations at low pressures. A near-equilibrium degassing path was observed for a decompression rate of 0.0028 MPa/s. Experimental data combined with natural pumice textures suggest that both homogeneous and heterogeneous bubble nucleations occurred in the phonolitic magma during the AD 79 Vesuvius plinian event. Homogeneous bubble nucleation probably occurred at a depth of ∼ 3 km, in response to a fast decompression of the magma during the ascent.     

Magmatic structures in the Krkonoše–Jizera Plutonic Complex,Bohemian Massif: evidence for localized multiphase flow and small-scale thermal–mechanical instabilities in a granitic magma chamber

The present paper examines magmatic structures in the Jizera and Liberec granites of the Krkonoše–Jizera Plutonic Complex, Bohemian Massif. The magmatic structures are here interpreted to preserve direct field evidence for highly localized magma flow and other processes in crystal-rich mushes, and to capture the evolution of physical processes in an ancient granitic magma chamber. We propose that after chamber-wide mixing and hybridization, as suggested by recent petrological studies, laminar magma flow became highly localized to weaker channel-like domains within the higher-strength crystal framework. Mafic schlieren formed at flow rims, and their formation presumably involved gravitational settling and velocity gradient flow sorting coupled with interstitial melt escape. Local thermal or compositional convection may have resulted in the formation of vertical schlieren tubes and ladder dikes whereas subhorizontal tubes or channels formed during flow driven by lateral gradients in magma pressure. After the cessation or deceleration of channel flow, gravity-driven processes (settling of crystals and enclaves, gravitational differentiation, development of downward dripping instabilities), accompanied by compaction, filter pressing and melt segregation, dominated in the crystal mush within the flow channels. Subsequently, magmatic folds developed in schlieren layers and the magma chamber recorded complex, late magmatic strains at high magma crystallinities. Late-stage magma pulsing into localized submagmatic cracks represents the latest events of magmatic history of the chamber prior to its final crystallization. We emphasize that the most favorable environments for the formation and preservation of magmatic structures, such as those hosted in the Jizera and Liberec granites, are slowly cooling crystal-rich mushes. Therefore, where preserved in plutons, these structures may lend strong support for a “mush model” of magmatic systems.     

东昆仑约格鲁岩体暗色微粒包体特征及成因

对东昆仑约格鲁花岗岩体中暗色微粒包体的形态、大小、成分和分布等主要特征进行了较详细地研究。发现包体形态多样,以强烈的塑性流变为特征;包体大小悬殊,多数直径为几十厘米,最大者长轴达4m;包体成分以闪长质为主,结构总体上比寄主岩石的粒度细,岩体中不同部位的包体成分和结构都有所变化;包体分布不均匀,经常呈族状、条带状密集分布,具定向性。镜下研究发现,在包体中经常见到针状磷灰石、石英捕虏晶和斜长石的自形内核环带及增生边等现象,显示了岩浆混合成因的特点。     

海底玄武岩中的中酸性玻璃质熔体研究

笔者在冲绳海槽海底玄武岩基质中发现的中酸性玻璃质熔体 ,与以往在基性火山岩中发现的玻璃质熔体存在明显的差异 :( 1)在存在状态上 ,前者呈充填状态存在于细小的基质矿物之间 ,其体积明显受到岩浆冷却速率的制约 ;后者常出现富铁相和富硅相两种熔体共存现象 ,且一种熔体常呈球状分布于另一种熔体中。 ( 2 )在成分演化上 ,前者随着冷却速率的降低 ,成分向酸性方向演化 ;后者的成分与冷却速率间的关系不明显 ,一直表现为富铁相和富硅相两端员成分 ,缺失中间过渡成分。这两种类型的熔体 ,分别反映了幔源岩浆不同的演化过程 :冲绳海槽海底玄武岩中的中酸性玻璃质熔体 ,反映了幔源岩浆结晶分异演化过程 ,并记录了演化过程中各阶段产物的特征 ;而以往在基性火山岩中发现的富铁相和富硅相两种熔体的共存现象 ,反映了幔源岩浆的熔离过程 ,并记录了熔离产物的特征。     

Stepwise accumulation and ascent of magmas

One of the currently popular theories on magma ascent is that it mainly occurs by propagating hydrofractures (dykes) and that magma viscosity is the primary rate‐controlling factor. This theory is based on mathematical models for single hydrofractures under idealised conditions. We simulated magma ascent with air ascending through gelatine and observed that the air ascended in batches, following paths made by their predecessors. Multiple batches accumulate at obstacles along the path. Although magma viscosity may control ascent rate during movement, obstacles ultimately control the size and average ascent velocity of ascending batches. We propose that step‐wise movement of magma batches is the mechanism of primary accumulation and ascent from the partially molten source rock of a magma to its first emplacement site and therefore the main ascent mechanism for granitic magmas. ‘Classical’ dyking is the mechanism for secondary ascent from a magma chamber.     

Petrogenetic and Metallogenetic Background of the Dajing Cu–Sn–Ag–Pb–Zn Ore Deposit, Inner Mongolia, and Characteristics of the Mineralizing Fluid

Abstract: The Dajing Cu–Sn–Ag–Pb–Zn ore deposit, Inner Mongolia of China, is a fissure‐filling hydrothermal ore deposit that occurs within the Upper Permian Linxi group. No magmatic pluton and volcanic rocks outcrop on the surface of the deposit. Most of ore veins show clear‐cut boundary with country rocks. Wallrock alterations that include silicification, carbonation, chlori–tization, and sericitization are generally weak and occur in the close vicinity of ore veins. Mineralization is divided into three stages: (1) cassiterite–arsenopyrite–quartz stage, (2) sulfide stage, and (3) Pb–Zn–Ag–carbonate stage. These mineralization stages have distinct ranges of homogenization temperatures, 290–350C for Stage 1, 260–320C for Stage 2, and 150–250C for Stage 3. However, salinities for Stages 1, 2, and 3 overlap and range between 2.2 and 10.4 wt % NaCl equivalent. The dD values relative to V‐SMOW of inclusion water from quartz are lower than –88% and centered at –100 to –130%. The δ³⁴S values relative to CDT of sulfide ore minerals and δ¹³C values relative to PDB of carbonate gangue minerals, vary from –0.3 to +2.6%, and from –7.0 to –2.9%, respectively. Integrated isotopic data point to two major contributions to the mineralizing fluid that include a dominant meteoric‐derived water and the other from hypogene magma for sulfur and carbon species. Analyses of inclusion gas and liquid compositions are performed. The H₂O and CO₂ are the two most abundant gaseous components, whereas SO₄^2‐ and Cl^‐, and Na⁺, Ca²⁺, and K⁺ are the major anions and cations, respectively. A linear trend is shown on the gaseous H₂O versus CO₂ plot. Phase separation is excluded as cause for the trend on the basis of isotope data and fluid inclusion microthermometry. In addition, a weak wallrock alteration does not support fluid‐rock interaction as an efficient mechanism. Hence, the linear H₂O–CO₂ trend is interpreted in terms of absorption or dilution of CO₂–dominant magmatic vapor by meteoric‐derived water. Cooling effects resulting from dilution may have caused precipitation of ore minerals. Major and trace element compositions of regional granites show a high‐K calc–alkaline characteristics and an arc–affinity. Lead isotopic compositions of galena samples from the Dajing deposit exhibit elevated U/Pb and Th/Pb ratios. These characteristics indicate a common source of supra subduction zone mantle wedge for regional granites and metals from the Dajing deposit.     

Generation of Deccan Trap magmas

Deccan Trap magmas may have erupted through multiple centers, the most prominent of which may have been a shield volcano-like structure in the Western Ghats area. The lavas are predominantly tholeiitic; alkalic mafic lavas and carbonatites are rare. Radioisotope dating, magnetic chronology, and age constraints from paleontology indicate that although the eruption started some 68 Ma, the bulk of lavas erupted at around 65–66 Ma. Paleomagnetic constraints indicate an uncertainty of ± 500,000 years for peak volcanic activity at 65 m.y. in the type section of the Western Ghats. Maximum magma residence times were calculated in this study based on growth rates of “giant plagioclase” crystals in lavas that marked the end phase of volcanic activity of different magma chambers. These calculations suggest that the > 1.7 km thick Western Ghats section might have erupted within a much shorter time interval of ∼ 55,000 years, implying phenomenal eruption rates that are orders of magnitude larger than any present-day eruption rate from any tectonic environment. Other significant observations/conclusions are as follows: (1) Deccan lavas can be grouped into stratigraphic subdivisions based on their geochemistry; (2) While some formations are relatively uncontaminated others are strongly contaminated by the continental crust; (3) Deccan magmas were produced by 15–30% melting of a Fe-rich lherzolitic source at ∼ 3–2 GPa; (4) Parent magmas of the relatively uncontaminated Ambenali formation had a primitive composition with 16%MgO, 47%SiO₂; (5) Deccan magmas were generated much deeper and by significantly more melting than other continental flood basalt provinces; (6) The erupted Deccan tholeiitic lavas underwent fractionation and magma mixing at ∼ 0.2 GPa. The composition and origin of the crust and crust/mantle boundary beneath the Deccan are discussed with respect to the influence of Deccan magmatic episode.