Oil and gas resource assessment: The linkage between geological analysis and discovery process model results

Two widely-used techniques to estimate the volume of remaining oil and gas resources are discovery process modeling and geologic assessment. Both were used in a recent national assessment of oil and gas resources of the United States. Parallel estimates were obtained for 27 provinces. Geological-based estimates can typically see into areas not available to discovery process models (that is areas with little or no exploration history) and thus, on average, yield higher estimates. However, a linear relation does exist between the mean estimates obtained from these two methods. In addition, other variables were found in a multiple regression model that explained much of the difference. Thus, it is possible to perform discovery process modeling and adjust the estimates to yield results that might be expected from geological-based assessments.     

地下水非稳定流的LTFAM算法

渗流域内应用拉普拉斯变换(LT)建立相应的有限分析(FAM)方程,顾及渗流域内地下水流的初始条件和边界条件,可在LT空间构成一个封闭的以水头像函数为变量的线性方程组。将此方程组所得的解,通过Stehfest数值反演公式,可归化为时间域的解(水头)。由于时间t被隐含在数值方程内,从而克服了传统数值法按时段(△t)逐步迭代的缺陷,提高了计算效率,也为用嵌入法建立地下水流管理模型提供了一条捷径。     

Interpolation by regularized spline with tension: I. Theory and implementation

Bivariate and trivariate functions for interpolation from scattered data are derived. They are constructed by explicit minimization of a general smoothness functional, and they include a tension parameter that controls the character of the interpolation function (e.g., for bivariate case the surface can be tuned from a membrane to a thin steel plate), Tension can be applied also in a chosen direction, for modeling of phenomena with a simple type of anisotropy. The functions have regular derivatives of all orders everywhere. This makes them suitable for analysis of surface geometry and for direct application in models where derivatives are necessary. For processing of large datasets (thousands of data points), which are now common in geosciences, a segmentation algorithm with a flexible size of overlapping neighborhood is presented. Simple examples demonstrating flexibility and accuracy of the functions are presented.On leave from the Department of Physical Geography and Cartography, Comenius University, Mlynská dolina, Bratislava, Czechoslovakia.On leave from the Institute of Physics, Dúbravská cesta 9, Bratislava, Czechoslovakia.     

内蒙古中西部宝音图群石榴角闪岩的地球化学、变质作用及年代学特征

宝音图群分布于内蒙古中西部狼山、图古日格和达茂旗一带，主要由云母片岩、石英片岩、石英岩、角闪岩和大理岩组成。在狼山格尔敖包沟和图古日格西南地区发育十分典型的石榴角闪岩，均以似层状或透镜状产自云母片岩中，但两地具有不同的矿物组合，前者主要以石榴石+角闪石+斜长石+含钛矿物（金红石和钛铁矿）为特征，后者主要以石榴石+角闪石+绿帘石+含钛矿物（金红石和钛铁矿）为特征。地球化学研究显示两个地区的石榴角闪岩原岩具有相似的化学组成，均为亚碱性玄武岩的拉斑系列。宝音图群的石榴角闪岩具有右倾的稀土配分模式，REE总量为83.31×10^-6~125.9×10^-6，（La/Yb）_N比值为2.17~6.48，δEu=0.87~0.98。Ta、Nb、Ti没有明显的负异常，其配分型式类似E-MORB特点。微量元素构造判别图解表明这些石榴角闪岩的原岩产于板内拉张环境中。本文通过模拟格尔敖包沟样品LS01和图古日格西南地区样品LS35的P-T视剖面图研究其变质作用及矿物演化过程，结果显示这两个样品均经历了早期进变质，峰期以及峰后近等温减压的顺时针型P-T轨迹。样品LS01的峰期温压条件为~11kbar/~735℃，模拟得到的峰期矿物组合可能为石榴石+角闪石+斜长石+黑云母+透辉石+金红石+熔体，P-M（H₂O）视剖面图显示，由于峰后演化过程中存在饱和流体渗透，导致峰期透辉石无法保留。样品LS35的峰期温度压力条件为~8kbar/675℃，其峰期组合为石榴石+角闪石+绿帘石+金红石。两个地区的石榴角闪岩的温度压力条件明显不同，推测宝音图群中呈透镜体或似层状产出的变质基性岩，存在着递增型的变质作用。锆石LA-ICP-MS U-Pb年代学的研究结果显示石榴角闪岩样品LS01的变质锆石年龄为394±8Ma。由此推测这些石榴角闪岩的原岩可能形成于华北北缘在新元古代发育的裂陷盆地，在泥盆纪中期，宝音图群作为华北克拉通的一部分，被卷入到与古亚洲洋闭合有关的造山过程，发育中压型递增变质作用。     

Characterizing heterogeneous permeable media with spatial statistics and tracer data using sequential simulated annealing

Characterizing heterogeneous permeable media using flow and transport data typically requires solution of an inverse problem. Such inverse problems are intensive computationally and may involve iterative procedures requiring many forward simulations of the flow and transport problem. Previous attempts have been limited mostly to flow data such as pressure transient (interference) tests using multiple observation wells. This paper discusses an approach to generating stochastic permeability fields conditioned to geologic data in the form of a vertical variogram derived from cores and logs as well as fluid flow and transport data, such as tracer concentration history, by sequential application of simulated annealing (SA). Thus, the method incorporates elements of geostatistics within the framework of inverse modeling. For tracer-transport calculations, we have used a semianalytic transit-time algorithm which is fast, accurate, and free of numerical dispersion. For steady velocity fields, we introduce a transit-time function which demonstrates the relative importance of data from different sources. The approach is illustrated by application to a set of spatial permeability measurements and tracer data from an experiment in the Antolini Sandstone, an eolian outcrop from northern Arizona. The results clearly reveal the importance of tracer data in reproducing the correlated features (channels) of the permeability field and the scale effects of heterogeneity.     

Estimation for partially observed Markov processes

Many stochastic process models for environmental data sets assume a process of relatively simple structure which is in some sense partially observed. That is, there is an underlying process (X_n, n 0) or (X_t, t 0) for which the parameters are of interest and physically meaningful, and an observable process (Y_n, n 0) or (Y_t, t 0) which depends on the X process but not otherwise on those parameters. Examples are wide ranging: the Y process may be the X process with missing observations; the Y process may be the X process observed with a noise component; the X process might constitute a random environment for the Y process, as with hidden Markov models; the Y process might be a lower dimensional function or reduction of the X process. In principle, maximum likelihood estimation for the X process parameters can be carried out by some form of the EM algorithm applied to the Y process data. In the paper we review some current methods for exact and approximate maximum likelihood estimation. We illustrate some of the issues by considering how to estimate the parameters of a stochastic Nash cascade model for runoff. In the case of k reservoirs, the outputs of these reservoirs form a k dimensional vector Markov process, of which only the kth coordinate process is observed, usually at a discrete sample of time points.     

Large eddy simulation of hydrocyclone—prediction of air-core diameter and shape

Hydrocyclones are widely used in the mining and chemical industries. An attempt has been made in this study, to develop a CFD (computational fluid dynamics) model, which is capable of predicting the flow patterns inside the hydrocyclone, including accurate prediction of flow split as well as the size of the air-core. The flow velocities and air-core diameters are predicted by DRSM (differential Reynolds stress model) and LES (large eddy simulations) models were compared to experimental results. The predicted water splits and air-core diameter with LES and RSM turbulence models along with VOF (volume of fluid) model for the air phase, through the outlets for various inlet pressures were also analyzed. The LES turbulence model led to an improved turbulence field prediction and thereby to more accurate prediction of pressure and velocity fields. This improvement was distinctive for the axial profile of pressure, indicating that air-core development is principally a transport effect rather than a pressure effect.     

Fracture analysis in the south-western Corinth rift (Greece) and implications on fault hydraulic behavior

This paper reviews the data concerning the fracture network and the hydraulic characteristics of faults in an active zone of the Gulf of Corinth. Pressure gap measured through fault planes shows that in this area the active normal faults (Aigion, Helike) act, at least temporarily and locally, as transversal seal. The analysis of the carbonate cements in the fractures on both the hangingwall and the footwall of the faults also suggests that they have acted as local seals during the whole fault zone evolution. However, the pressure and the characteristics of the water samples measured in the wells indicate that meteoric water circulates from the highest part of the relief to the coast, which means it goes through the fault zones. Field quantitative analysis and core studies from the AIG-10 well have been performed to define both regional and fault-related fracture networks. Then laboratory thin section observations have been done to recognize the different fault rocks characterizing the fault zone components. These two kinds of approach give information on the permeability characteristics of the fault zone. To synthesize the data, a schematic conceptual 3D fluid flow modeling has been performed taking into account fault zone permeability architecture, sedimentation, fluid flow, fault vertical offset and meteoric water influx, as well as compaction water flow. This modeling allows us to fit all the data with a model where the fault segments act as a seal whereas the relays between these segments allow for the regional flow from the Peloponnese topographic highs to the coast.     

Effect of some additives on synthesis of zeolite from coal fly ash

Hydrothermal conversion of fly ash into zeolites was conducted and the effects of the addition of sodium halide and waste solutions produced after zeolitization of fly ash, as well as the adjustment of the Si/Al ratio prior to synthesis process on the formation and cation exchange capacity (CEC) of zeolite product were evaluated. Both the addition of NaCl and NaF ameliorated the crystallinity and CEC of synthesized zeolite, but NaF had a better improvement effect. Na⁺ was considered to enhance the crystallization of zeolite, while F⁻ favored the dissolution of fly ash. The type of zeolite formed depended on the Si/Al ratio of the starting material prior to the nucleation and crystallization of zeolite. The adjustment of the Si/Al ratio of fly ash by addition of Na₂SiO₄ and Al(OH)₃ changed the type and CEC of zeolite. Waste solutions contained large amount of Si and little Al due to the formation of a zeolite named NaP1 in zeolite terminology with the Joint Committee of Powder Diffraction Standard (JCPDS) code of 39-0219. The alkalinity decreased largely. As a result, the CEC value of zeolite products synthesized with waste solution as alkali source decreased. The supplementation of new alkali to adjust the alkalinity of waste solution could enhance the CEC of synthesized product. It was concluded that: (1) addition of sodium halide and adjustment of the Si/Al ratio prior to synthesis can improve the quality of zeolite; (2) waste solutions produced following the zeolitization of fly ash can be reused as an alkali source in the activation of fly ash; zero-emission of waste solution in the synthesis of zeolite from fly ash is possible.     

A novel strategy using biodegradable EDDS for the chemically enhanced phytoextraction of soils contaminated with heavy metals

For the sake of cost and potential environmental risk, it is necessary to minimize the amount of chelates used in chemically-enhanced phytoextraction. In the present study, a biodegradable chelating agent, EDDS was added in a hot solution at 90℃ to the soil in which garland chrysanthemum （Chrysanthemum coronarium L.） and beans （Phaseolus vulgaris L., white bean） were growing. The application of hot chelate solutions was much more efficient than the application of normal chelate solutions （25℃） in improving the uptake of heavy metals by plants. When 1 mmol kg1 of EDDS as a hot solution was applied to soil, the concentrations ofCu, Zn and Cd and the total phytoextraction by the shoots of the two plant species exceeded or approximated those in the shoots of plants treated with 5 mmol kg^-1 of normal EDTA solution. The concentrations of metals in the shoots of beans were significantly correlated with the relative electrolyte leakage rate of root cells, indicating that the root damage resulting from the hot solution might play an important role in the process of chelate-enhanced metal uptake. The soil leaching study demonstrated that decreasing the dosage of chelate resulted in decreased concentrations of soluble metals in soils. On the 28th day following the application of chelate, the concentrations of soluble metals in the EDDS treated soil were not significantly different from the concentrations in the control soil to which chelates had not been applied.