铝对铬成矿地球化学的依存性和对抗性

基于岩浆铬矿床与超镁铁质岩石的关系，从元素亲合性和共生规律的角度揭示了铝对铬成矿制约的主导作用，分析了铝和铬亲石、亲氧的二重性及其晶体化学的依存关系。论证了超镁铁Ｓｉ－Ｏ体系中铝丰度过高或过低均不利于铬的成矿。揭示了制约元素分散富集的因素都是在一定条件下互为依存和转化的，是在动态中的矛盾的对立和统一。     

硅酸盐样品微波加热碱熔分解方法

本文研究了硅酸盐样品在常压下，用微波炉进行碱熔分解的熔样时间，试剂用量和滴加水量等情况对分解的影响，确定了最佳实验条件，将此法用于地球化学标准参考样品ＳｉＯ２的测定，取得了满意的结果。     

云南墨江金厂金矿床含铬层状硅酸盐矿物成分标型特征

含铬绢云母类矿物在云南墨江金厂金矿床中广泛出现于黄铁铬绢英岩、黄铁硅质岩、黄铁铬云母岩和石英脉中。含铬绿泥石类矿物主要出现在石英脉、硅质岩、黄铁铬绢英岩中。蒙脱石出现于蚀变围岩中，而高岭石出现于富金石英脉中。本文通过对72个上述矿物电子探针数据的分析，确定了与其成因产状对应的含铬绢云母、含铬伊利石、含铬绿泥石、含铬蒙脱石、高岭石矿物的系列成分标型。研究表明，具最高铬含量的上述矿物样品均位于近金厂岩体穿脉的最北端。在铬铝云母SiO2-Cr2O3关系图上可以看出，不同成矿背景的铬铝绢云母，其Cr、Si离子数有分区特点，而本矿床的铬铝云母成分标型反映其富硅富铬的特点，与金厂超基性岩体的变质热液有关。     

铝硅酸盐熔体微结构单元的探讨

本文是一篇综述，讨论在熔融铝硅酸盐和铝酸盐中Al的两性行为。这是7台金学和岩石学中一个至今尚无可靠结论的问题。作者认为：每个四配位的Ala都含一个配位键，例如Al—O(^Ca Si)或Al—O(^Ca Al)。相应的非桥氧Onb并没有消失，而是变成了三价氧离子。碱性Alb能否出现取决于该体系的酸碱平衡。构筑硅酸盐的键合结构模型时，作者建议用5种Si-O四面体(Qn)作为微结构单元。即，用它们的相对量和微观化学位描述其宏观物性(如组元活度)。为了沟通铝硅酸盐的微观结构与宏观物性，仍可用5种Qn作为微结构单元。其中所含Ala的影响用各种Qn微观化学位的相应变化来反映。对于铝酸盐，建议用Ala-O四面体(Tn)作为微结构单元。     

Precise/ Small Sample Size Determinations of Lithium Isotopic Compositions of Geological Reference Materials and Modern Seawater by MC-ICP-MS

The Li isotope ratios of four international rock reference materials, USGS BHVO-2, GSJ JB-2, JG-2, JA-1 and modern seawater (Mediterranean, Pacific and North Atlantic) were determined using multi-collector inductively coupled plasma-mass spectrometry (MC-ICP-MS). These reference materials of natural samples were chosen to span a considerable range in Li isotope ratios and cover several different matrices in order to provide a useful benchmark for future studies. Our new analytical technique achieves significantly higher precision and reproducibility (< ± O.3%o 2s) than previous methods, with the additional advantage of requiring very low sample masses of ca . 2 ng of Li.     

Conditions of pocket formation in the Oktyabrskaya tourmaline-rich gem pegmatite (the Malkhan field, Central Transbaikalia, Russia)

Coexisting melt (MI), fluid-melt (FMI) and fluid (FI) inclusions in quartz from the Oktaybrskaya pegmatite, central Transbaikalia, have been studied and the thermodynamic modeling of PVTX-properties of aqueous orthoboric-acid fluids has been carried out to define the conditions of pocket formation. At room temperature, FMI in early pocket quartz and in quartz from the coarse-grained quartz–oligoclase host pegmatite contain crystalline aggregates and an orthoboric-acid fluid. The portion of FMI in inclusion assemblages decreases and the volume of fluid in inclusions increases from the early to the late growth zones in the pocket quartz. No FMI have been found in the late growth zones. Significant variations of solid/fluid ratios in the neighboring FMI result from heterogeneous entrapment of coexisting melts and fluids by a host mineral. Raman spectroscopy, SEM EDS and EMPA indicate that the crystalline aggregates in FMI are dominated by mica minerals of the boron-rich muscovite–nanpingite CsAl₂[AlSi₃O₁₀](OH,F)₂ series as well as lepidolite. Topaz, quartz, potassium feldspar and several unidentified minerals occur in much lower amounts. Fluid isolations in FMI and FI have similar total salinity (4–8 wt.% NaCl eq.) and H₃BO₃ contents (12–16 wt.%). The melt inclusions in host-pegmatite quartz homogenize at 570–600 °C. The silicate crystalline aggregates in large inclusions in pocket quartz completely melt at 615 °C. However, even after those inclusions were significantly overheated at 650±10 °C and 2.5 kbar during 24 h they remained non-homogeneous and displayed two types: (i) glass+unmelted crystals and (ii) fluid+glass. The FMI glasses contain 1.94–2.73 wt.% F, 2.51 wt.% B₂O₃, 3.64–5.20 wt.% Cs₂O, 0.54 wt.% Li₂O, 0.57 wt.% Ta₂O₅, 0.10 wt.% Nb₂O₅, 0.12 wt.% BeO. The H₂O content of the glass could exceed 12 wt.%. Such compositions suggest that the residual melts of the latest magmatic stage were strongly enriched in H₂O, B, F, Cs and contained elevated concentrations of Li, Be, Ta, and Nb. FMI microthermometry showed that those melts could have crystallized at 615–550 °C.

Crystallization of quartz–feldspar pegmatite matrix leads to the formation of H₂O-, B- and F-enriched residual melts and associated fluids (prototypes of pockets). Fluids of different compositions and residual melts of different liquidus–solidus P–T-conditions would form pockets with various internal fluid pressures. During crystallization, those melts release more aqueous fluids resulting in a further increase of the fluid pressure in pockets. A significant overpressure and a possible pressure gradient between the neighboring pockets would induce fracturing of pockets and “fluid explosions”. The fracturing commonly results in the crushing of pocket walls, formation of new fractures connecting adjacent pockets, heterogenization and mixing of pocket fluids. Such newly formed fluids would interact with a primary pegmatite matrix along the fractures and cause autometasomatic alteration, recrystallization, leaching and formation of “primary–secondary” pockets.     

The structural role of Ti in aluminosilicate liquids in the glass transition range: insights from heat capacity and shear viscosity measurements

The shear viscosities and 1 bar heat capacities of glasses and melts along the 67mol% silica isopleth in the system SiO₂-Al₂O₃-Na₂O-TiO₂ have been determined in the temperature ranges 780-1140 K and 305-1090 K respectively. Anomalous behaviour of both these properties is observed for compositions rich in TiO₂ and/or Al₂O₃, an observation attributed to liquid-liquid phase separation followed by anatase crystallization. For samples which do not show anomalous behaviour, it is found that the partial molar heat capacity of the TiO₂ component previously determined in Al-free compositions reproduces our heat capacities to within 1.3%. Viscosity data show that addition of TiO₂ tends to increase viscosity and melt fragility at constant temperature. Furthermore, heat capacity and viscosity data may be combined within the framework of the Adam-Gibbs theory to extract values of the configurational entropy of the liquids and qualitative estimates of the variation of the average energy barrier to viscous flow. Configurational entropy at 900K is inferred to decrease upon addition of TiO₂, in contrast to previous results from Al-free systems. The compositional limit separating normal from anomalous behaviour, as well as the data for homogenous melts have been used to constrain the structural role of Ti in these samples. Our data are consistent with a majority of Ti in five-fold coordination associated with a titanyl bond, in agreement with previous spectroscopic studies. Furthermore, we find no evidence for a Ti-Al interaction in our samples, and we are led to the conclusion that Al and Ti are incompletely mixed, a hypothesis consistent with the observed reduction of configurational entropy upon addition of TiO₂, suggesting an important role of medium range order in controlling the variations in thermodynamic properties.     

富铌玄武岩：板片熔体交代的地幔楔橄榄岩部分熔融产物

富铌玄武岩是一类具有特殊地球化学特征的岛弧玄武岩。与正常岛弧玄武岩相比，它具有硅饱和并富钠的特征；同时具有相对高的Nb（一般>7×10-6）、TiO2（1%～2%）和P含量，以及低的LILE/HFSE和HREE/HFSE比值，并富集高场强元素；它的原始地幔标准化微量元素图显示了弱的Nb、Ta负异常（有时出现弱的正异常），原始地幔标准化La/Nb比值小于2（但很少小于0.7），它是由受埃达克质熔体交代过的地幔橄榄岩部分熔融形成的。由于富铌玄武岩与埃达克岩是大洋板片俯冲作用的直接产物，因此，通过对该岩石组合及与俯冲作用有关的流体和熔体的研究，不仅可以查明洋壳俯冲作用过程中的岩浆活动特征，还可以阐明洋壳俯冲及壳幔相互作用，具十分重要的地质意义。     

Geochemistry of Late Cretaceous （ 60 - 67 Ma） igneous activities in the Hebrides Terrace seamount （guyot） area, Scotland

Tholeiitic basalts in various stages of alteration were dredged from Late Cretaceous volcanic rocks (60 -67 Ma) in the Hebrides Terrace seamount area in the Atlantic Ocean. These rocks are extrusive olivine basalts, including high- and low-Al basalts. High-Al basalts are depleted in MgO, CaO, Cr,Sc, V, St, Zr and enriched in TiO2, Na2O, Nb, Rb as compared with low-A1 basalts. Petrography and bulk-rock composition (major, trace and rare-earth elements) data defined clear tholeiitic suites displaying possible liquid lines of descent related to different degrees of crystal fractionation and partial melting.Isotopic dating of dredged samples gave the guyot an age of 60 - 67 Ma, in support of the assumption that it was formed during the Late Cretaceous.