八庙—青山金红石矿床化学成分与成矿关系

本矿床是我国金红石矿床重要的成因及工业类型，为具有特定化学成分的岩石在特定变质条件下形成的。本文通过对大量数据的处理，查明了化学成分与成矿的关系：高Ａｌ２Ｏ３、ＭｇＯ、Ｆｅ２Ｏ３＋ＦｅＯ、Ｋ２Ｏ、Ｐ２Ｏ５、Ｈ２Ｏ＋、ＭｎＯ，低ＳｉＯ２、ＣａＯ、Ｎａ２Ｏ、ＣＯ２、Ｓ等，利于钛富集；高ＴｉＯ２、ＭｇＯ、Ｐ２Ｏ５、Ｓ，低ＳｉＯ２、ＣａＯ、Ｋ２Ｏ、Ａｌ２Ｏ３、Ｆｅ２Ｏ３／ＦｅＯ，利于金红石形成；高Ｓｃ、Ｚｒ、Ｎｉ、Ｚｎ及Ｌａ／Ｙｂ，低Ｙ、Ｎｂ、Ｔｈ、Ｃｄ、Ｂａ、Ｂｅ、ΣＲＥＥ，利于金红石纯度提高。对研究矿床成因及寻找新的同类矿床等有重要意义     

右江复合盆地的沉积特征及其构造演化

位于华南褶皱带南缘的右江盆地,其发展可分为两个不同的阶段。它的轮廓和结构,与NW向及NE向同沉积断裂关系密切。盆地内的沉积物,分别由特征不同的非补偿性和补偿性沉积相组成两个双层结构。盆地内火山活动发育,也明显的分为两个阶段。海西期,古特提斯洋的发展使哀牢山洋盆开裂,导致了右江地区在拉张应力条件下出现若干NW向裂陷带,这时的盆地具有大陆边缘裂谷特点。东吴运动后开始的印支期,区域应力条件发生变化。滨大平洋构造的发生,使盆地轮廓和结构发生明显变化,与此同时开始的哀牢山洋盆向NE方向的俯冲消减作用,使盆地在新的挤压条件下再次发生张裂和拗陷。进入了弧后盆地发展阶段。印支期末,盆地封闭。     

金矿床的热液流体特征研究

通过对中国东部金成矿区域地质特征的分析,根据氢氧同位素及流体包裹体数据特征,表明中国东部金矿床成矿流体主要来自大气降水,其次为变质作用过程释放的水和岩浆分异水;成矿金属组分主要来自太古宙变质岩系。     

桂西古侵蚀沉积间断面型金矿床(续载)

古侵蚀沉积间断面型金矿是桂西的主要金矿床类型。文章着重分析该类型金矿成矿地质条件 ,论述矿床成因及成矿机理 ,认为此类型金矿易采易冶 ,经济效益显著 ,建议加大开发力度。     

沉积物粒度分析在厦门市第四纪环境研究和地层划分对比中的应用

采用MS2000型激光粒度分析仪进行测试，利用计算机粒度分析软件对数据进行整理和计算，绘制出样品的频率曲线、概率累积曲线以及粒度众数位值曲线等图件并进行沉积环境分析。厦门地区第四纪环境演化经历了中更新世同安组(含泥中粗砂、含泥细中砂、砂为主)海积一冲积一更新统上部龙海组(含泥粗中砂、含泥细中砂、含泥粗砂、粗砂、细中砂、含细砾中粗砂、中细砂等)冲积一洪冲积一更新世上部东山组(砂、砂砾、含泥中粗砂、粗砂、泥质中细砂、细砂、中粗砂等)冲洪积及部分海积(粉砂、细粉砂、含碳质泥、粘土、淤泥质粘土、粉砂质粘土等)一全新世长乐组(粉砂，淤泥质粘土、粉砂质粘土、碳质粘土、含砂淤泥质粘土，粉砂质亚粘土、粉细砂亚粘土等)海湾沉积。在解释环境变化的同时，说明粒度变化曲线在一定程度上可以作为地层划分的依据之一，并以此对研究区地层进行了详细划分。     

Alluvial architecture of the Holocene Rhine–Meuse delta (the Netherlands)

Ancient fluvial successions often act as hydrocarbon reservoirs. Sub‐surface data on the alluvial architecture of fluvial successions are often incomplete and modelling is performed to reconstruct the stratigraphy. However, all alluvial architecture models suffer from the scarcity of field data to test and calibrate them. The purposes of this study were to quantify the alluvial architecture of the Holocene Rhine–Meuse delta (the Netherlands) and to determine spatio‐temporal trends in the architecture. Five north–south orientated cross‐sections, perpendicular to the general flow direction, were compiled for the fluvial‐dominated part of the delta. These sections were used to calculate the width/thickness ratios of fluvial sandbodies (SBW/SBT) and the proportions of channel‐belt deposits (CDP), clastic overbank deposits (ODP) and organic material (OP) in the succession. Furthermore, the connectedness ratio (CR) between channel belts was calculated for each cross‐section. Distinct spatial and temporal trends in the alluvial architecture were found. SBW/SBT ratios decrease by a factor of ca 4 in a downstream direction. CDP decreases from ca 0·7 (upstream) to ca 0·3 (downstream). OP increases from less than 0·05 in the upstream part of the delta to more than 0·25 in the downstream delta. ODP is approximately constant (0·4). CR is ca 0·25 upstream, which is approximately two times larger than in the downstream part of the delta. Furthermore, CDP in the downstream Rhine–Meuse delta increases after 3000 cal yr BP. These trends are attributed to variations in available accommodation space, floodplain geometry and channel‐belt size. For instance, channel belts tend to narrow in a downstream direction, which reduces SBW/SBT, CDP and CR. Tectonics cause local deviations in the general architectural trends. In addition, the positive correlation between avulsion frequency and the ratio of local to regional aggradation rate probably influenced alluvial architecture in the Rhine–Meuse delta. The Rhine–Meuse data set can be a great resource when developing more sophisticated models for alluvial architecture simulation, which eventually could lead to better characterizations of hydrocarbon reservoirs. To aid such usage of the Rhine–Meuse data set, constraints for relevant parameters are provided at the end of the paper.     

Carbonate aeolianites of western Saurashtra,India: experimental decipherment of the depositional mechanisms

Granular carbonate deposits of Late Pleistocene to Early Holocene age, commonly referred to as ‘miliolite limestone’, occur in a linear belt, parallel to the southern coast of Saurashtra, India. In the present study area these carbonate deposits are found in select valleys between ridges and mounds of pyroclastic material present in the Deccan trap plateau. Two different depositional histories have been proposed for these sediments. The presence of marine bioclasts led to the postulation of a marine origin for these deposits. The second school of thought propounded redeposition of the coastal sediments by aeolian processes. Although a few features could not be explained by the proposed aeolian model, critical comparison of these two views favoured the aeolian origin. The mode of occurrence, lithological and structural attributes, and microscopic evidence presented here, also support a possible aeolian origin for these deposits. Experimental observation indicates that these carbonate aeolianites represent backflow deposits, which accumulated because of the flow separation caused by the presence of topographic highs. The conspicuous concave‐up geometry of the deposit conformed to the shape of the separation bulb. In view of the inferred depositional mechanism, the disposition of the deposits and the signature of the palaeoflow direction suggest that the carbonate particles were derived from the north‐western coast of Saurashtra by strong south‐easterly winds. Massive granular carbonates with outsized basement clasts appear to be the product of avalanching of granular material from the higher contours because of oversteepening of the primary deposit.     

Mapping Proterozoic unconformity-related uranium deposits in the Rockhole area, Northern Territory, Australia using landsat ETM+

The Rockhole area, Northern Territory, Australia, hosts a number of Proterozoic unconformity-related uranium deposits. The geology of the area features within Paleoproterozoic rocks of the Pine Creek Orogen, near the unconformity with overlying platform cover sandstone of the Paleo- to Mesoproterozoic McArthur Basin. Landsat Enhanced Thematic Mapper plus (ETM+) data was used in the Rockhole area to assist in mapping geological structures and lithology, and to identify anomalous concentrations of ferrous minerals, the product of alteration, which can be indicators of buried uranium mineralization. Several image-processing procedures were applied to the ETM+ data to identify, isolate and enhance mineralogical information as simple and complex false color composites. ETM+ 754 shown as red green and blue respectively was the best simple image. Overall, complex images based on Principal Component Analysis proved to be the most useful products. Sandstone, shale and siltstone, the target lithologies, Koolpin Formation, the target stratigraphic unit, and bleaching pattern due to the removal of iron(II) compounds, the target alteration pattern, were confidently mapped to provide information required by the mineral emplacement model, which ultimately identified areas of likely uranium mineralization. Thus the contrasting behavior of the two principle oxidation states of uranium and iron can be utilized to map/delineate bleached alteration zones associated with economic concentrations of uranium using multispectral sensors like Landsat or better hyperspectral sensors.     

准噶尔盆地腹部Z2井三叠系地层及沉积特征

对准噶尔Z2井三叠系各组的岩性、电性特征进行了详细解释与描述,对各组的孢粉、大孢子组合特征展开了讨论,提出了该井三叠系地层划分为自碱滩组、克拉玛依组和百口泉组,且将其与邻区钻遇的三叠系进行了横向及纵向对比。在此基础上,通过对测、录井资料的精细解释,并借鉴前人的区域沉积相研究成果,探讨了该区三叠纪沉积环境。     

滇西北保山核桃坪铅锌矿床成矿流体来源的同位素地球化学证据

滇西北核桃坪铅锌矿是保山地块内沿澜沧江断裂带发育的一个大型铅锌多金属矿床,矿体严格受近SN向的断裂带及层间破碎带控制,赋存于上寒武统核桃坪组和沙河厂组大理岩化灰岩及矽卡岩中。文章在分析矿床地质特征的基础上,通过对V1矿体的氢、氧、碳、硫、硅和铅同位素地球化学的示踪研究,探讨了成矿溶液中水、碳、硅、硫和铅的来源以及成矿流体的演化问题。研究表明,V1矿体中矿石的石英δ18O水值变化范围为6·1‰~7·6‰,平均为6·7‰,其δDV-SMOW值变化范围为-100‰~-108‰,平均为-104‰,说明成矿流体主要来自深部岩浆分异水,并在后期成矿作用过程中有地层建造水和大气降水的加入;矿石中方解石的δ13CV-PDB和δ18O水值分别为-6·6‰~-5·9‰和5·0‰~5·2‰,反映成矿流体的碳、氧具有深部流体与围岩发生交代反应的特征。硅、硫和铅同位素具深部岩浆或地幔来源的特点,但遭受后期壳源物质的混染。据此提出该矿床是与深部岩浆热液或幔源流体贯入有关的构造热液脉型矿床,其成矿作用受控于深部过程的驱动和控制,可为指导地质找矿提供依据。