The stable isotope signature of kilometre-scale fracturedominated metamorphic fluid pathways, Mary Kathleen, Australia

Abstract Large calcite veins and pods in the Proterozoic Corella Formation of the Mount Isa Inlier provide evidence for kilometre-scale fluid transport during amphibolite facies metamorphism. These 10- to 100-m-scale podiform veins and their surrounding alteration zones have similar oxygen and carbon isotopic ratios throughout the 200 × 10-km Mary Kathleen Fold Belt, despite the isotopic heterogeneity of the surrounding wallrocks. The fluids that formed the pods and veins were not in isotopic equilibrium with the immediately adjacent rocks. The pods have δ¹³C_calcite values of –2 to –7% and δ¹⁸O_calcite values of 10.5 to 12.5%. Away from the pods, metadolerite wallrocks have δ¹⁸O_whole-rock values of 3.5 to 7%. and unaltered banded calc-silicate and marble wallrocks have δ¹³C_calcite of –1.6 to –0.6%, and δ¹⁸O_calcite of 18 to 21%. In the alteration zones adjacent to the pods, the δ¹⁸O values of both metadolerite and calc-silicate rocks approach those of the pods. Large calcite pods hosted entirely in calc-silicates show little difference in isotopic composition from pods hosted entirely in metadolerite. Thus, 100- to 500-m-scale isotopic exchange with the surrounding metadolerites and calc-silicates does not explain the observation that the δ¹⁸O values of the pods are intermediate between these two rock types. Pods hosted in felsic metavolcanics and metasiltstones are also isotopically indistinguishable from those hosted in the dominant metadolerites and calc-silicates. These data suggest the veins are the product of infiltration of isotopically homogeneous fluids that were not derived from within the Corella Formation at the presently exposed crustal level, although some of the spread in the data may be due to a relatively small contribution from devolatilization reactions in the calc-silicates, or thermal fluctuations attending deformation and metamorphism. The overall L-shaped trend of the data on plots of δ¹³C vs. δ¹⁸O is most consistent with mixing of large volumes of externally derived fluids with small volumes of locally derived fluid produced by devolatilization of calc-silicate rocks. Localization of the vein systems in dilatant sites around metadolerite/calc-silicate boundaries indicates a strong structural control on fluid flow, and the stable isotope data suggest fluid migration must have occurred at scales greater than at least 1 km. The ultimate source for the external fluid is uncertain, but is probably fluid released from crystallizing melts derived from the lower crust or upper mantle. Intrusion of magmas below the exposed crustal level would also explain the high geothermal gradient calculated for the regional metamorphism.     

临邑洼陷圈闭类型及成因研究

临邑洼陷是一个含油气层系较多,结构复杂的复式油气聚集区。本文重点介绍了临邑洼陷圈闭的类型及其成因,从圈闭角度对临邑洼陷油气藏的形成进行了概述,对临邑洼陷下步的勘探工作方向进行了分析。     

An approach to quantitative analysis of regional economic links

Aimed at promoting regional coalitions and expanding the approach to economic links, this paper puts forward some new concepts such as link intensity and receiving coefficient, expounds the indexes of quantitative analysis of economic links and establishes the quantitative-analysis model of economic links. With help of the model, this paper calculates the values of the link intensities between Su-Xi-Chang (Suzhou-Wuxi-Changzhou) region and Shanghai, and analyzes the regional difference of the economic links.     

内蒙古正蓝旗羊蹄子山-磨石山钛矿区硅质岩地球化学特征及沉积环境意义

文章通过详细的野外地质调查和系统的岩石化学、稀土元素、微量元素及硅、氧同位素等研究,探讨了羊蹄子山-磨石山钛矿区无矿白色硅质岩和富钛硅质岩的成因及形成地质构造环境。研究结果表明,呈厚层状产出的无矿白色硅质岩具较高的SiO2、Al2O3含量及Al/(Al Fe Mn)、Al2O3/(Al2O3 Fe2O3)比值,稀土元素总量很低,其北美页岩标准化配分模式为向右倾的曲线,无明显铈异常和铕异常,表明其形成于受陆源影响的大陆边缘构造环境;赋矿岩系中薄层状富钛硅质岩的TiO2、Fe2O3、Cu、V含量较高,但Al/(Al Fe Mn)、Al2O3/(Al2O3 Fe2O3)比值较低,稀土元素总量较高,北美页岩标准化曲线为明显左倾型-平坦型,具弱的负铈异常,表明其形成于洋脊及附近环境。两种硅质岩的δ30Si值为变化较小的负值,与热水沉积和某些生物成因硅质岩的硅同位素组成相似,两者的δ18O值范围和平均值均相似。两类硅质岩的成因及形成构造环境不同,富钛硅质岩的地球化学特征表明,该矿床的形成与本区元古宙海底火山热液喷流作用有关。     

秦岭造山带的印支运动及印支期成矿作用

秦岭碰撞造山经历了长期的板块构造的俯冲-碰撞的构造演化,于印支期最终完成对接拼合,形成了统一的中国大陆,并由此转入陆内变形。众多Au、Mo多金属矿床的同位素年龄资料表明,印支期是秦岭的重要成矿期,其成矿作用明显受到构造演化的控制,反映特定的地球动力学背景和作用过程。秦岭印支期成矿作用不仅是中国东部中生代成矿作用的先导和开始,奠定了中国东部中生代成矿大爆发的基础,而且为碰撞期和碰撞期后构造体制快速转换的研究提供了依据。重视秦岭以及中国印支期成矿作用的研究,对正确认识秦岭成矿带的区域成矿规律、造山带演化的深部动力学过程,建立符合中国和东亚实际的印支期成矿理论体系具有重要科学意义。     

Extensional tectonic origin of gneissosity and related structures of the Feiran–Solaf metamorphic belt, Sinai, Egypt

The Feiran–Solaf metamorphic belt consists of low-P high-T amphibolite facies, partly migmatized gneisses, schists, amphibolites and minor calc-silicate rocks of metasedimentary origin. There are also thick concordant synkinematic sheets of diorite, tonalite and granodiorite orthogneiss and foliated granite and pegmatite dykelets. The gneissosity (or schistosity) is referred to as S₁, and is almost everywhere parallel to lithological layering, S₀. This parallelism is not due to transposition. The gneissosity formed during an extensional tectonic event (termed D1), before folding of S₀. S₁ formed by coaxial pure shear flattening strain (Z normal to S₀, i.e. vertical; with X and Y both extensional and lying in S₁). This strain also produced chocolate tablet boudinage of some layers and S₁-concordant sills and veins. S₁ has a strong stretching lineation L₁ with rodding characteristics. Within-plane plastic anisotropy (lower ductility along Y compared to along X) resulted in L₁-parallel extensional ductile shears and melt filled cracks. Continued shortening of these veins, and back-rotation of foliations on the shears produced intrafolial F₁ folds with hinges parallel to the stretching lineation. F₁ fold asymmetry variations do not support previous models involving macroscopic F₁ folds or syn-gneissosity compressional tectonics. The sedimentary protoliths of the Feiran–Solaf gneisses were probably deposited in a pre-800 Ma actively extending intracratonic rift characterizing an early stage of the break-up of Rodinia.     

江西浒坑钨矿含矿石英脉的地质特征及成矿构造演化

位于赣西武功山地区的江西浒坑钨矿是一个大型石英脉型钨矿床,与赣南典型的“五层楼”模式不同,矿脉主要集中在岩体内接触带。含矿石英脉除了普通的块状构造以外,还普遍存在条带状构造。详细的野外编录和镜下研究表明含矿块状石英脉在形成后遭受不同程度的韧性剪切,从而形成不同成分的分异条带。剪切带以出现新生的面理和线理（拉伸线理）为特征。岩石学研究表明条带状矿石属于糜棱岩,具有丰富的塑性变形显微构造特征。通过对含矿石英脉的构造解析,认为与岩浆岩有关的原生节理系统基本上是同时形成的,沿节理充填的石英脉经历了长期的、多期次的构造运动,从而形成了复杂的石英脉和矿石类型。建立了原生节理形成→石英充填→韧性剪切发生→二期石英充填→脆性碎裂的矿区构造演化序列。韧性剪切作用的动力学背景可能是受后期岩浆侵入的影响,最后的脆性破裂应与区域上存在南北向的压应力有关。     

新疆可可托海—四川简阳地学断面岩石圈与软流圈结构

运用现代构造解析理论和方法,对新疆可可托海—四川简阳人工地震测深剖面与天然地震面波层析成像进行构造解析基础上,综合地质学、深源岩石包体构造岩石学和地球化学以及其他地球物理学标志等多学科综合研究显示,高速块体或幔块构造的几何结构型式是控制该区岩石圈构造格局和岩石圈表层构造变形基本条件之一。本文建立起该地学断面地壳及岩石圈与软流圈速度结构模型和物质组成结构模型,划分出岩石圈3种几何结构模式:克拉通陆根状结构、造山带楔状结构和高原陆根状结构,以及岩石圈二类构造演化类型:克拉通型岩石圈和增厚型岩石圈。在系统论述断面地壳及岩石圈结构构造类型特征基础上,探讨了该断面软流圈结构特征,岩石圈与软流圈相互作用及其地幔动力学模式。     

杭州泗岭铝质A型花岗岩的发现及其构造意义

初步研究表明,以往被认为是典型的S型花岗岩或改造-重熔型花岗岩的泗岭岩体应为铝质A型花岗岩。该岩体高硅、碱、钾而明显贫钙、镁;高(K2O Na2O)/CaO值(平均16.79)和AKI指数(平均0.92);FeO*/MgO比值大(平均13.95),高于M型、S型和I型花岗岩,而与世界A型花岗岩平均值(13.4)相近;岩石为弱碱性、准铝-弱过铝质,富含稀土元素、HFSE元素,高Rb、F和Nb,反映其具A型花岗岩的成分特征。泗岭岩体氧同位素δ18O为 8‰～ 9‰,反映岩浆主要起源于下地壳。该岩体侵位于拉张的构造环境,是晚白垩世早期一次重要的构造-岩浆热事件,同时也反映了区域性孝丰—三门湾大断裂与学川—湖州大断裂在晚白垩世早期处于拉伸阶段。