基于矩形网格的有限差分走时计算方法

对于大多数速度场，地震波沿射线传播的初至波走时，可以用有限差分外推的方法在二维或三维数值网格上计算出来. 在保证精度的条件下，为提高计算效率和适应性，本文推导了基于任意矩形网格和局部平面波前近似的有限差分初至波走时计算方法. 另外，该方法对首波和散射波做了合适的处理，而且不会碰到传统射线法存在的阴影区和焦散区等问题. 简单模型和复杂的Marmousi模型试算的结果表明，该方法精度较高并适用于强纵、横向变速的复杂介质. 基于该方法的Kirchhoff叠前深度偏移, 在主要构造和目的层位置的成像效果上基本达到了波动方程法叠前深度偏移的位置成像效果. 由于未考虑续至波等有效能量，在成像的保幅性上不如波动方程法叠前深度偏移的效果，但其计算效率则明显高于全格林函数法和波动方程法.      

露天矿非工作帮移动监测及滑坡规律性讨论

根 据 某露 天 煤 矿 非工 作 帮 移 动监 测 的 多 年资 料 ,总 结 出 露 天矿 非 工 作 帮的 监 测 方 法,并 初 步探 讨 了 露 天 矿非 工作 帮 移动 滑坡 的 规律 性。     

Period formulas of shear wall buildings with flexible bases

The evaluation of the fundamental period of shear wall buildings considering the flexibility of the base is investigated in this paper. This research is motivated by the discrepancy reported between the formulas used in different building codes and the measurement of real buildings. Both experimental and analytical approaches are used to assess the effect of the base flexibility on the fundamental period of shear wall structures. In total, twenty buildings built on different types of soil are tested under ambient vibration. The fundamental period is identified using a non‐parametric linear model in the frequency domain. The results show that fundamental period formulas used by UBC‐97 and NBCC‐95 are inadequate since they do not include the effect of the foundation stiffness. To improve the estimation of the fundamental period of shear wall buildings, an analytical approach is presented. The structure and the foundation are represented by a continuous‐discrete system. The stiffnesses of the base are represented by translational and rotational discrete springs. The rigidities of these springs are evaluated from the elastic uniform compression of the soil mass and the size of the foundation. The analytical predictions improve the estimation of the fundamental period and keep the computation simple. The error between the measured period and the analytical results is, on average, less than 10%. Copyright © 2003 John Wiley & Sons, Ltd.     

The seismic shear of ductile cantilever wall systems in multistorey structures

The distribution of seismic base shear demand among ductile flexural cantilever walls, comprising the lateral load resisting system of a multistorey building, is studied. It is shown that the base shear force demand depends on the sequence of hinge formation at the wall bases, and this in turn depends on the relative wall lengths. Hence, the routine elastic approach in which the shear forces are allocated per relative flexural rigidity or (when some consideration is given to plastic hinge formation) to moment capacity at the wall base, may appreciably underestimate the shear force demand on the walls, particularly the shorter (usually the more flexible) ones. A simple procedure yielding the results of ‘cyclic’ pushover analysis is proposed to predict the peak seismic wall forces for a given total base shear when plastification is confined to the wall base. The effects of plastic hinges developing at higher floors on (1) shear distribution among the walls and (2) the in‐plane floor forces are also considered. Two numerical examples are presented to demonstrate the main points made. Copyright © 2004 John Wiley & Sons, Ltd.     

Approximate modal decomposition of inelastic dynamic responses of wall buildings

Two approximate methods for decomposing complicated inelastic dynamic responses of wall buildings into simple modal responses are presented. Both methods are based on the equivalent linear concept, where a non‐linear structure is represented by a set of equivalent linear models. One linear model is used for representing only one vibration mode of the non‐linear structure, and its equivalent linear parameters are identified from the inelastic response time histories by using a numerical optimizer. Several theoretical relations essential for the modal decomposition are derived under the framework of complex modal analysis. Various numerical examinations have been carried out to check the validity of the proposed modal decomposition methods, and the results are quite satisfactory in all cases. Fluctuating bending moment and shear at any location along the wall height contributed by each individual vibration mode can be obtained. Modal contributions to shear and flexural strength demands, as well as the corresponding modal properties, under various seismic loading conditions can also be identified and examined in detail. Furthermore, the effects of higher vibration modes on seismic demands of wall buildings are investigated by using the modal decomposition methods. Several new insights into the complicated inelastic dynamics of multi‐story wall buildings are presented. Copyright © 2004 John Wiley & Sons, Ltd.     

The Activity of Major Faults and the Hydrothermal Alteration Zone at Tianchi Volcano of Changbaishan

It is found by field investigation that the near horizontal top surface of the brown or brick-red hydrothermai alteration zone varies obviously in elevation at different sections of the same layer on the caldera‘s inner wall of Tianchi, with that at the north section near the Tianwen Peak about 110 m higher than that at the south near the Jiangjun Peak in Korea. The top surface of the hydrothermai alteration zone can be taken as key horizon to tectonic movement. The difference indicates that the total uplift height of the NW wall of the Liudaogou-Tianchi-Jingfengshan fault, the principal fault trending NE at Tianchi, is bigger than that of the SE wall ever since the occurrence of hydrothermal alteration. This also explains why the topography in the northwest side of Tianchi is steeper and with more developed river system than in the southeast. The uplifting of the northeastern wall is bigger than that of the southwest along the principal NW-trend fault, namely, the Baishanzhen-Tianchi-Jince fault. It is observed from characters of hydrothermal alteration and the palaeoresiduum, that the recent vertical movement rate along the principal NE-trend fault is larger than that of the principal NW-trend fault. The two faults intersect at Tianchi, dividing the volcano into 4 blocks, with the uplift magnitudes decreasing successively in the order of the north, the west, the east and the south block. The biggest uplift of the north block corresponds well to the shallow magma batch in the north of Tianchi observed by DSS and telluric electromagnetic sounding, and etc. and they may be related with the causes.     

聚合物溶液在地下连续墙施工中的试验研究

简要叙述了一种新型地下连续墙施工稳定液——聚合物溶液的研制及其与细分散泥浆性能的对比，这种新型聚合物溶液克服了目前使用的地下连续墙稳定液品种单一、性能较差的缺点，满足复杂地层的地下连续墙施工需要。同时阐述了这种稳定液的组成成分和性能及其主要特点。     

长沙现代大厦复合土钉墙基坑支护方案设计

分析了长沙现代大厦基坑的岩土工程条件及周边环境条件，在此基础上对几种基坑支护方案进行了分析论证，并对所采用的复合土钉墙支护方案进行了设计计算。     

HJ-1复合型钻井液的研究及应用

分析和探讨了HJ-1复合型钻井液对复杂地层护壁的作用机理及护壁性能试验情况，介绍了其在寨上矿区复杂地层钻探中的成功应用。     

Structural and geotechnical impacts of surface rupture on highway structures during recent earthquakes in Turkey

The most significant damage on highway bridges during the recent earthquakes in Turkey (Kocaeli and Duzce earthquakes) and Taiwan (Chi–Chi earthquake) was the result of fault ruptures traversing transportation infrastructure. This phenomenon and its consequences accentuate the need to examine surface rupture hazards and to identify those areas at risk. This understanding can help to develop remedial measures for both structural and geotechnical engineering. For that purpose, damage to highway bridges during the recent events was reviewed. The total collapse of the highway overpass in Arifiye, during the Kocaeli earthquake, was investigated. The major problems under consideration (in Arifiye) were: (i) dislodging of the bridge spans, and consequently, the total separation of the reinforced concrete girders from the piers; and (ii) the stability of a mechanically stabilized earth wall (MSEW) system under extreme loading conditions. The results of the structural and geotechnical investigations presented herein can be taken in consideration to improve transportation infrastructure against surface rupture hazards.