GPS接收机测试评估系统数据库的建立

为评定GPS接收机的性能,建立的接收机测试评估系统在对接收机进行测试的过程中将涉及到大量的测试相关数据。为了对这些数据进行科学、安全的存储管理,文中通过分析数据的来源、数据的存储类型以及数据的相互关系等,在考虑了数据库运行的安全性和稳定性的基础上,详细地介绍了GPS接收机测试评估系统数据库的建立。     

土钉抗拔承载力的原位试验研究

根据土钉现场抗拔试验数据,分析了钉材、浆液龄期等因素对土钉抗拔承载力的影响,建议了合理的下层土钉开挖时间。最后通过试验土钉抗拔力反算土体与锚固体的极限粘结强度,并与规范推荐值进行了比较。     

底摩擦重力试验在倾倒变形岩体稳定性研究中的应用

底摩擦重力试验(底摩擦试验)是利用相似理论分析原理,将研究原形按几何比例和各种物理力学参数,制作相似模型及确定相应的边界条件。然后按照相似边界条件进行加载试验,再现曾经发生过或今后将会出现的物理力学现象,进而了解其发展演化规律及其对工程的影响。澜沧江某水电站坝肩主要为典型的倾倒变形岩体,为探讨倾倒变形岩体在天然重力场条件的变形破裂发展趋势。试验采用模拟重力场条件的岩体底摩擦模型试验技术模拟分析岩体倾倒变形进一步发展演变过程及特征。     

免棱镜全站仪测距性能的测试及精度分析

介绍了免棱镜全站仪的基本特点和性能;对Nikon DTM-352免棱镜全站仪在无反射棱镜条件下的测距性能进行了多方面的测试,包括照准不同材质和不同颜色的反射目标测距、以不同的入射角(激光束与目标面之间的夹角)测距、瞄准不同透明度的反射面测距以及对物镜加罩测距,并通过对大量的测试结果进行精度分析,得出了一些对实际工作有参考价值的结论。     

Changes in hydrogeological properties of the River Choushui alluvial fan aquifer due to the 1999 Chi-Chi earthquake, Taiwan

Changes in hydrogeological properties of the River Choushui alluvial fan aquifer before and after the 1999 Chi-Chi earthquake, Taiwan, have been identified using pumping tests. Three wells, SH2, YL2 and SC2, located in a compressional zone with high coseismic groundwater levels, were tested. The threshold of the aquifer deformation with respect to transmissivity (T) is greater than that with respect to storage coefficient (S). Decreases in the post-earthquake S are approximately 60% at SH2 and SC2, indicating aquifer compression after the Chi-Chi earthquake. Changes in the post-earthquake T range from 61% increase to 0.8% decrease. Moreover, results from anisotropy analysis of T at SC2 further illustrate that normal stresses induced by the Chi-Chi earthquake have consolidated soil particles. Soil particles dilated laterally after the earthquake, resulting in an increase of the equivalent T. The changes in hydrogeological properties have a considerable influence on spatiotemporal fluid pressure and horizontal groundwater movement, resulting in different amounts of drawdown during post-earthquake pumping.     

Evaluation of change in subsurface thermal environment due to groundwater flow in the Tokyo Lowland,Japan

Information on the distribution of subsurface temperature and hydraulic heads at 24 observation wells in and around the Tokyo Lowland, the eastern part of the Tokyo Metropolitan area, were examined to make clear the relationship between groundwater and the subsurface thermal environment in the urban area. Minimums in temperature–depth logs due to subsurface temperature increasing at shallow parts were recognized in 21 wells. This fact shows subsurface temperature is affected by ground surface warming in almost all of this area. Deeper than minimums, where the effects of surface warming became relatively small, regional variation is observed as follows: high temperatures are shown in the central part to the southern part, and low temperatures shown in the inland to eastern part. The high temperature area corresponds to an area where the lower boundary of groundwater flow is relatively shallow. This area corresponds also to an area with severe land subsidence resulting from excessive groundwater pumping. It is considered that this high temperature area is formed by the effects of upward groundwater flow affected by hydrogeological conditions and pumping. On the other hand, a comparison between past data (1956–1967) and present data (2001–2003) revealed widespread decreasing temperature in the inland area. This is explained by downward groundwater flow based on an analysis of temperature–depth logs. This fact suggests that subsurface temperature is not only increasing from the effects of surface warming but also decreasing from the effects of groundwater environment change due to pumping.     

Using Sequential Self-Calibration Method to Identify Conductivity Distribution: Conditioning on Tracer Test data

An iterative inverse method, the sequential self-calibration method, is developed for mapping spatial distribution of a hydraulic conductivity field by conditioning on nonreactive tracer breakthrough curves. A streamline-based, semi-analytical simulator is adopted to simulate solute transport in a heterogeneous aquifer. The simulation is used as the forward modeling step. In this study, the hydraulic conductivity is assumed to be a deterministic or random variable. Within the framework of the streamline-based simulator, the efficient semi-analytical method is used to calculate sensitivity coefficients of the solute concentration with respect to the hydraulic conductivity variation. The calculated sensitivities account for spatial correlations between the solute concentration and parameters. The performance of the inverse method is assessed by two synthetic tracer tests conducted in an aquifer with a distinct spatial pattern of heterogeneity. The study results indicate that the developed iterative inverse method is able to identify and reproduce the large-scale heterogeneity pattern of the aquifer given appropriate observation wells in these synthetic cases.     

地震学定量预报指标的一种提取方法——对比筛选法

鉴于目前地震学综合定量预报指标的缺乏和预报工作的急需,尝试使用“对比筛选法(简称CSM方法)”进行地震学定量预报指标的提取试验。较之以往作法的进展在于:1.同时使用“有震”和“无震”两类样本对比筛选;2.对不同地区的地震学参数进行了归一化处理。这样做的显著优点是:1.可以较有效地提取“有震异常”和“正常变化”指标;2.提取的异常和预报指标具有定量化和普适性特点。 试验研究使用大华北地震区资料,研究对象取中强地震。经内符和外推检验,证明该方法提取的异常和预报指标有效性和实用性较高。     

Integrability of the Yang-Mills Hamiltonian system

This paper considers the integrability of generalized Yang-Mills system with the HamiltonianH _a (p, q)=1/2(p ₁ ² +p ₂ ² +a ₁ q ₁ ² +a ₂ q ₂ ² )+1/4q ₁ ⁴ +1/4a ₃ q ₂ ⁴ + 1/2a ₄ q ₁ ² q ₂ ² . We prove that the system is integrable for the cases: (A)a ₁=a ₂,a ₃=a ₄=1; (b)a ₁=a ₂,a ₃=1,a ₄=3; (C)a ₁=a ₂/4,a ₃=16,a ₄=6. Our main result is the presentation of these integrals. Only for cases A and B does the Yang-Mills Hamiltonian possess the Painlevé property. Therefore the Painlevé test does not take account of the integrability for the case C.