Steel frames with bracing mechanism and hysteretic dampers

A new earthquake resistant structural system for multi‐storey frame structures, based on a dual function of its bracing components, is developed. This consists of a hysteretic damper device and a cross‐bracing mechanism with a kinetic closed circuit, working only in tension, so that cable members can be used for this purpose. Solutions are presented regarding the connections' design of three types of structural frame system, that are concerned throughout the study: braced moment free frame, braced moment resisting frame with moment free supports, and with moment resisting supports. The dynamic behaviour of the system is investigated on the basis of an SDOF model, and based on the response spectra method an approximate design approach of the controlled structures is shown. From the time history analysis of the structural systems for the El Centro earthquake the areas of appropriate stiffness relations of the frames to the hysteretic dampers and the cable braces are deduced, so that the energy dissipation of the system may be controlled by the damper‐cable bracing mechanism. Based on the results of these studies, a predesign approach is developed for the implementation of the control system in frame structures. Copyright © 2003 John Wiley & Sons, Ltd.     

Aseismic negative dislocation model and deformation analysis of crustal horizontal movement during 1999——2001 in the northeast margin of Qinghai-Xizang block

Through numerical simulation for GPS data, aseism/c negative dislocation model for crustal horizontal movement during 1999-2001 in the northeast margin of Qinghai-Xizang block is presented, combined with the spatial distri-bution of apparent strain field in this area, the characteristics of motion and deformation of active blocks and their boundary faults, together with the place and intensity of strain accumulation are analyzed. It is shown that: a) 9 active blocks appeared totally clockwise motion from eastward by north to eastward by south. Obvious sinistral strike-slip and NE-NEE relative compressive motion between the blocks separated by Qilianshan-Haiyuan fault zone was discovered; b) 20 fault segments (most of them showed compression) locked the relative motion between blocks to varying degrees, among the total, the mid-east segment of Qilianshan fault (containing the place where it meets Riyueshan-Lajishan fault) and the place where it meets Haiyuan fault and Zhuanglanghe fault, more favored accumulation of strain. Moreover, the region where Riyueshan-Lajishan fault meets north boundary of Qaidam block may have strain accumulation to some degree, c) Obtained magnitude of block velocities and locking of their boundaries were less than relevant results for observation in the period of 1993-1999.     

Lithology and palynology of Neogene sediments on the narrow edge of the Kitakami Massif (basement rocks), northeast Japan: Significant change for depositional environments as a result of plate tectonics

Abstract A controversial stratigraphic section, the Taneichi Formation, is exposed along the Pacific Coast of northeastern Honshu, the main island of the Japanese Archipelago. Although most sediments of the formation have long been dated as late Cretaceous, the northern section of it has been assigned to (i) the Upper Cretaceous; (ii) the Paleogene; or (iii) the Neogene. In the present report, we present the data of palynological and sedimentological studies, showing that the northern section should be assigned to the Neogene. A more important point in the present study is that we invoke some basic principles of fluvial sedimentology to resolve this stratigraphic subject. The lignite layers full of Paleogene–Miocene dinoflagellate cysts and pollen assemblages drape over the boulder‐sized (>40 cm in diameter) clasts in the northern section. However, the layers totally consist of aggregates of small lignite chips, indicating that the lignites are allochthonous materials. The mega‐clasts with derived microfossils in the lignites are thought to have been deposited as Neogene fluvial (flood) sediments in the newly formed Japanese Archipelago. Prior to the Miocene, the northern Honshu was part of the Eurasian Plate, thus the boulder‐sized clasts cannot be envisaged as long river flood deposits along the continental Paleogene Pacific Coast. Instead, the mega‐clasts with the draping lignites were probably derived from nearby Miocene highlands in the newly born island arc.     

华山新生代隆升-剥蚀历史的裂变径迹热年代学分析

综合分析前人的热年代学数据发现华山地区自晚白垩世以来至少经历了三次快速隆升阶段，在120—57Ma间华山经历了缓慢隆升过程，约57Ma以来华山开始相对渭河地堑的快速隆升。其中，57—42Ma间、32—22Ma间和约8Ma以来均为相对快速隆升阶段，视隆升速度约为0．18～0．23mm／a；而42—32Ma问和22～8Ma间则为相对缓慢隆升过程，视隆升速度约为0．01mm／a。约57Ma以来华山的隆升—剥蚀量约为8．5km，平均隆升速度约为0．15mm／a；约32Ma以来的总隆升幅度约为4．5～5．1km，平均视隆升速度约为0．14～0．16mm／a。晚中生代以来华山的隆升过程实际上反映的是东秦岭的隆升过程，与区域地貌结构和周缘断陷盆地的演化过程有密切的成因联系，它表明东秦岭地区的三级等高峰顶面是120—57Ma、42—32Ma和22～8Ma间山脉缓慢隆升—剥蚀的结果，同时反映57—55Ma是渭河盆地开始快速裂陷和秦岭北麓正断层开始强烈活动的时间。     

非活动大陆边缘的天然气水合物及其成藏过程述评

非活动陆缘是板块活动相对较弱的地区，也是水合物发育的有利地区。通过对世界各地非活动陆缘地区水合物富集情况的系统分析，发现断褶组合构造、底辟构造以及“麻坑”地貌（Pockmark)与水合物的关系密切。尽管模拟海底反射层（Bottom Simulating Reflector,简称BSR，下同）是最重要的水合物识别标志，但水合物与BSR之间并不存在严格的一一对应关系。非活动陆缘具有丰富的烃类物质来源和适宜的温压条件，而断裂－褶皱组合构造、垒堑式构造和底辟构造等则为烃类气体的运移、富集和成藏提供了有利的构造环境，便于最终形成水合物。非活动陆缘的深水区往往发育有多期叠合盆地，因其物源、温压、构造和沉积条件的内在关联性，常常形成深部石油、中部天然气、浅部水合物的“三位一体”烃类能源结构模式。     

Comparative study of the inelastic response of base isolated buildings

This article presents a numeric comparative study of the inelastic structural response of base isolated buildings. The comparative study includes the following isolation systems: laminated rubber bearings, New Zealand one, pure friction and the frictional pendulum ones. The study is based on obtaining non‐linear response spectra for various design parameters using six earthquake records. Usually the base isolation of a new building seeks to maintain the structure in the linear elastic range. The response of old weak buildings or the response of new ones subjected to extreme earthquakes may not be, necessarily, in the aforementioned ideal elastic range. Consequently, it is important to characterize the response of isolated buildings responding inelastically. A conclusion from this research is that the isolators affect significantly the structural response of weak systems. Rubber isolators seem slightly less sensitive to plastification that may occur in the structure compared to friction isolators. Ductility demands in the structure are affected significantly by friction and neoprene protected systems, in particular sliding ones where larger demands are obtained. Copyright © 2002 John Wiley & Sons, Ltd.     

论构造耦合作用

构造耦合作用是一种普遍存在的地质现象。现今东、西太平洋的构造差异及古太平洋和现今太平洋大陆边缘构造差异与俯冲的洋壳板块性状有关,即:①俯冲角度;②俯冲角度的改变;③俯冲速率;④俯冲速率的改变;⑤俯冲深度;⑥俯冲板块前缘与海沟间的水平距离;⑦俯冲板块在670km上、下地幔界线处的构造形态;⑧俯冲板块的位移及位移方向。这种深部构造活动对浅部构造形成的制约和影响,是活动大陆边缘构造耦合现象的具体表现。中国西北部的盆山耦合现象是大陆内部的构造耦合作用,印度板块与欧亚板块碰撞产生的远距离效应,导致中亚地区产生陆内A型俯冲,A型俯冲是造成盆地消亡、山系形成的重要因素。     

Petrology and Geochemistry of the Volcanic Rocks Dredged from the Geophysicist Seamount in the Kurile Basin: Evidence for the Existence of Thinned Continental Crust

Dredged samples from the Geophysicist seamount volcano in the northeastern part of the Kurile Basin include volcanic and volcanoclastic rocks ranging from basalt to andesite. The rocks have geochemical features typical of high-K island-arc calc-alkaline volcanism. They are enriched in LILE and depleted in Zr, Ti, Nb, Ta and Y. The chondrite-normalized REE patterns are characterized by enrichment of LREE similar to those of island-arc lava from the submarine volcanoes of rear-arc zone of the Kurile Island Arc. The volcanic rocks have a wide range of ⁸⁷Sr/⁸⁶Sr ratios (0.70287-0.70652), varying ¹⁴³Nd/¹⁴⁴Nd and Pb isotopic ratios. Their trace-element compositions and Sr-Nd-Pb isotope signatures may be explained by a small addition of crustal continental component to mantle-derived magmas that suggest the existence of thinned continental basement under the eastern part of the Kurile Basin.     

Flexure of the Indian plate and intraplate earthquakes

The flexural bulge in central India resulting from India's collision with Tibet has a wavelength of approximately 670 km. It is manifest topographically and in the free-air gravity anomaly and the geoid. Calculations of the stress distribution within a flexed Indian plate reveal spatial variations throughout the depth of the plate and also a function of distance from the Himalaya. The wavelength (and therefore local gradient) of stress variation is a function of the effective elastic thickness of the plate, estimates of which have been proposed to lie in the range 40–120 km. The imposition of this stress field on the northward moving Indian plate appears fundamental to explaining the current distribution of intraplate earthquakes and their mechanisms. The current study highlights an outer trough south of the flexural bulge in central India where surface stresses are double the contiguous compressional stresses to the north and south. The Bhuj, Latur and Koyna earthquakes and numerous other recent reverse faulting events occurred in this compressional setting. The N/S spatial gradient of stress exceeds 2 bars/km near the flexural bulge. The overall flexural stress distribution provides a physical basis for earthquake hazard mapping and suggests that areas of central India where no historic earthquakes are recorded may yet be the locus of future damaging events.     

Crustal structure of the continental margin of Korea in the East Sea (Japan Sea) from deep seismic sounding data: evidence for rifting affected by the hotter than normal mantle

Despite the various opening models of the southwestern part of the East Sea (Japan Sea) between the Korean Peninsula and the Japan Arc, the continental margin of the Korean Peninsula remains unknown in crustal structure. As a result, continental rifting and subsequent seafloor spreading processes to explain the opening of the East Sea have not been adequately addressed. We investigated crustal and sedimentary velocity structures across the Korean margin into the adjacent Ulleung Basin from multichannel seismic (MCS) reflection and ocean bottom seismometer (OBS) data. The Ulleung Basin shows crustal velocity structure typical of oceanic although its crustal thickness of about 10 km is greater than normal. The continental margin documents rapid transition from continental to oceanic crust, exhibiting a remarkable decrease in crustal thickness accompanied by shallowing of Moho over a distance of about 50 km. The crustal model of the margin is characterized by a high-velocity (up to 7.4 km/s) lower crustal (HVLC) layer that is thicker than 10 km under the slope base and pinches out seawards. The HVLC layer is interpreted as magmatic underplating emplaced during continental rifting in response to high upper mantle temperature. The acoustic basement of the slope base shows an igneous stratigraphy developed by massive volcanic eruption. These features suggest that the evolution of the Korean margin can be explained by the processes occurring at volcanic rifted margins. Global earthquake tomography supports our interpretation by defining the abnormally hot upper mantle across the Korean margin and in the Ulleung Basin.