内蒙古赤峰地区安家营子金矿成矿流体研究

该金矿床产于晚燕山期安家营子二长花岗岩岩体内,受NNE向断裂带控制。矿化类型属蚀变岩型。矿物包裹体研冤表明,成矿流体为CO2-H2O-NaCl-KCl体系,来自安家营子花岗岩浆期后热液,其氢氧同位素组成分别为δD=-80.0~-96.5‰,δ18OH2O=4.5~5.7‰。主成矿期四个成矿阶段包裹体的均一温度和盐度分别为Ⅰ=340~360℃:Ⅱ=315~330℃,3.80~6.20 wt％／NaCl,CO2密度0.2~0.3 g／cm3;Ⅲ=245~285℃,3.5~4.5 wt％NaCl:Ⅳ=150~170℃,<2.0wt％NaCl。成矿流体盐度和CO2密度均较低。包裹体气相成分中(CH4 CO)／CO2<0.1,成矿环境为弱还原条件;液相成分中K Na 总量较高,K >Na 有利于碱质交代成矿作用。根据CO2包裹体获得资料计算,成矿压力为500~750×105Pa,成矿深度为2.0~2.5 km。流体控矿因素有水-岩反应、CO2与H2O-NaCl溶液不混溶和硫浓度降低等。其中以水-岩反应为主,它贯穿成矿全过程,控制原始成矿流体由碱性向弱碱性-弱酸性变化,使流体发生交代成矿作用。     

沉积盆地中的流体包裹体：理论基础、图解与分析方法

本文主要介绍如何利用流体包裹体来获得合理的数据。首先对H2O-体系进行总结，着重介绍利用显微测温法和其他新的分析技术来确定流体的组成，并举例说明流体混合在流体包裹体研究中的应用。介绍了H2O-(气)-盐体系特别是CO2-CH4体系的图解，探讨了在低温下由于笼舍物的形成H2O-(气)-盐体系的复杂相变。重点介绍显微激光拉曼光谱仪在含甲烷水溶液流体中的应用，并根据相图详细讨论了如何确定流体的不混溶。     

含油流体包裹体：地球化学分析与地质应用

利用含油流体包裹体可以获得与原油和源区常规分析同等质量的可靠地球化学数据。细致而又小心谨慎地对待各测试步骤(如样品清洗、背景空白等)是成功进行包裹体油气成分分析的基础。从技术上来说，每一分析步骤都具有挑战性，但如果我们能按步骤循序渐进，就不仅能够分析那些含有大量石油包裹体的样品(如当今或古油藏样品)，而且可以测试含极少量石油包裹体的样品(如迁移路径或极古老岩石样品)。包裹体中可被测试的碳氢化合物多种多样，包括低分子量的碳氢化合物、n-链烷、类异戊二烯、生物标志物、芳香族碳氢化合物等。流体包裹体内石油成分分析在地质上有广泛应用，比如可以更好地重建储集区石油重注史、确定盆地中以前未知的活性源岩。在储集区内由生物降解造成的石油再造和(或)水洗作用经常被抹去，流体包襄体分析则可以解释储集区复杂成油阶段，当然更可以去除钻孔泥浆添加剂或其他污染物的影响。此外，也可以获知地球早期生物圈碳氢化合物的组成及多样性，以及在勘探区或盆地进行二次迁移路径填图。     

Genesis of Kanggur Gold Deposit in Eastern Tianshan Orogenic Belt, NW China: Fluid Inclusion and Oxygen and Hydrogen Isotope Constraints

Abstract. Primary fluid inclusions in quartz and carbonates from the Kanggur gold deposit are dominated by aqueous inclusions, with subsidiary CO₂-H₂O inclusions that have a constant range in CO₂ content (10–20 vol %). Microthermometric results indicate that total homogenization temperatures have a wide but similar range for both aqueous inclusions (120 to 310C) and CO₂-H₂O inclusions (140 to 340C). Estimates of fluid salinity for CO₂-H₂O inclusions are quite restricted (5.9∼10.3 equiv. wt% NaCl), whereas aqueous inclusions show much wider salinity ranging from 2.2 to 15.6 equivalent wt %NaCl.
The 6D values of fluid inclusions in carbonates vary from -45 to -61 %, in well accord with the published δD values of fluid inclusions in quartz (-46 to -66 %). Most of the δ¹⁸O and δD values of the ore-forming fluids can be achieved by exchanged meteoric water after isotopic equilibration with wall rock by fluid/rock interaction at a low water/rock ratio. However, the exchanged meteoric water alone cannot explain the full range of δ¹⁸O and δD values, magmatic and/or meta-morphic water should also be involved. The wide salinity in aqueous inclusions may also result from mixing of meteoric water and magmatic and/or metamorphic water.     

Tracing the protolith, UHP metamorphism, and exhumation ages of orthogneiss from the SW Sulu terrane (eastern China): SHRIMP U–Pb dating of mineral inclusion-bearing zircons

Orthogneisses are the major country rocks hosting eclogites in the Sulu UHP terrane, eastern China. All of the analyzed orthogneiss cores from the main drilling hole of the Chinese Continental Scientific Drilling Project (CCSD-MH) have similar major and trace element compositions and a granite protolith. These rocks have relatively high LREE/HREE ratios, strong negative Eu anomalies (Eu/Eu*=0.20–0.39), and negative Ba anomalies (Ba/Ba*=0.25–0.64). Coesite and coesite-bearing UHP mineral assemblages are common inclusions in zircons separated from orthogneiss, paragneiss, amphibolite, and (retrograded) eclogite of the CCSD-MH. This suggests that the eclogite, together with its country rocks, experienced in situ ultrahigh-pressure (UHP) metamorphism. Laser Raman spectroscopy and cathodoluminescence (CL) images show that zircons from the orthogneisses are zoned and that they have distinct mineral inclusions in the different zones. Most zircons retain early magmatic cores with abundant low-pressure mineral inclusions, which are mantled with metamorphic zircon-containing inclusions of coesite and other UHP minerals. The outermost rims on these grains contain low-pressure mineral inclusions, such as quartz and albite. SHRIMP U–Pb dating of the zoned zircons gives three discrete and meaningful groups of ages: Proterozoic ages for the protolith, 227±2 Ma for the coesite-bearing mantles, and 209±3 Ma for the amphibolite facies retrograde rims. The widespread occurrence of UHP mineral inclusions in zircons from the Sulu metamorphic belt dated at about 227 Ma suggests that voluminous continental crust experienced late Triassic subduction to depths of at least 120 km and perhaps more than 200 km. Eighteen million years later, the terrane was rapidly exhumed to midcrustal levels, and the UHP rocks were overprinted by amphibolite facies metamorphism. The exhumation rate deduced from the zircon age data and previously obtained metamorphic P–T data is estimated to be 5.6–11.0 km/Ma. Such rapid exhumation of the Sulu UHP terrane may be due to the buoyancy forces produced by subduction of low-density continental material into the deep mantle.     

一种潜在的地质压力计：流体包裹体子矿物的激光拉曼光谱测压法

高温高压下矿物的拉曼原位测量表明，某些拉曼活性的物质其拉曼位移与压力之间具有良好的线性关系。这一特性使我们能够通过测量矿物包裹体中含有这些子矿物的拉曼位移以确定矿物的形成压力。与目前常采用的共存矿物对压力计以及流体包裹体的CO2等容线法等压力测定方法相比，该方法具有快速、方便和准确的特点。由于包裹体中可以存在各种不同的子矿物以及不同的溶液物质，因此系统研究包裹体中一切可能存在的矿物或物质的拉曼位移与温度和压力之间的关系将可以提供一种方便、准确的地质压力测量手段。     

鲁东南岚山头超高压变质岩流体包裹体特征与板片折返史

鲁东南岚山头含柯石英榴辉岩主要产于花岗质片麻岩内,是苏鲁超高压变质带主要榴辉岩体密集分布区之一。流体包裹体研究表明,榴辉岩矿物及细脉石英中捕获有四种类型包裹体:在超高压-高压榴辉岩相条件下捕获的 N_2±CO_2包裹体;在高压榴辉宕重结晶阶段被捕获的 CO_2-H_2O 包裹体和含子矿物高盐度 H_2O 溶液包裹体:在超高压岩石折返过程中的最晚(角闪岩相退变质甚至更晚)阶段捕获的低盐度 H_2O 溶液包裹体。利用榴辉岩矿物及脉体石英中捕获的流体包裹体相互期次关系,可以对本区超高压变质作用板片折返过程中的流体演化史进行重建。     

Microthermometric measurement of fluid inclusions and its constraints on genesis of PGE-polymetallic deposits in Lower Cambrian black rock series, southern China

Systematic microthermometric measurements of fluid inclusions in the PGE-polymetallic deposits hosted in the Lower Cambrian black rock series in southern China were performed, and the results suggest: (1) there exist two types of fluid inclusions. TypeⅠis of NaCl-H2O system with low-medium salinity, and its homogenization temperatures (Th) and salinities are 106.9- 286.4℃ and ( 0.8- 21.8) wt%NaCl eq. respectively; TypeⅡ is of CaCl2-NaCl-H2O system with medium-high salinities, and its homogenization temperatures and salinities range from 120.1℃ to 269.6℃ and ( 11.4- 31.4) wt%NaCl eq., respectively. The typeⅡ fluid inclusions have been discovered for the first time in this kind of deposits; (2) two generations of ore-forming fluids were recognized. Characteristics of fluid inclusions in the PGE-polymetallic ores and carbonate-quartz stockworks in the underlying phosphorites are almost of no difference, they may represent ore-forming fluids at the main metallogenic stage. The peak value of homogenization temperature of those fluid inclusions is about 170℃, while their salinities possess a remarkable bimodal distribution pattern with two peak values of (27-31) wt%NaCl eq. and (4-6) wt%NaCl eq. On the contrary, fluid inclusions in the carbonate-quartz veins in the hanging wall may represent ore-forming fluids at the post-metallogenetic stage. The homogenization temperatures and the peak values of salinities are mostly 130-170℃ and (12-14) wt%NaCl eq., respectively; (3) nobel gas isotopic composition analyses in combination with the microthermometric measurements of fluid inclusions suggest that the ore-forming fluids at the main metallogenetic stage were probably derived from mixing of basinal hot brines with the CaCl2-NaCl-H2O system and seawater with the NaCl-H2O system; (4) in the Early Cambrian, the basinal hot brines were trapped in the Caledonian basins, which were distributed along the southern margin of the Yangtze Craton, and where giant thick sediments were accumulated, and expelled and migrated laterally along the strata because of the pressure caused by overlying sediments. The basinal hot brines absorbed Ni, Mo, V, PGE from the surrounding rocks and were transformed into ore-bearing hydrothermal fluids with the CaCl2-NaCl-H2O system and medium-high salinities, then ascended along faults and mixed with seawater of the NaCl-H2O system, and finally PGE-polymetallic deposits or occurrences were formed in the black rock series.     

Primary Ore Mineral Assemblage and Fluid Inclusion Study of the Batu Hijau Porphyry Cu-Au Deposit, Sumbawa, Indonesia

Abstract. The Batu Hijau porphyry Cu‐Au deposit, Sumbawa Island, Indonesia, is associated with a tonalitic intrusive complex. The temperature‐pressure condition of mineralization at the Batu Hijau deposit is discussed on the basis of fluid inclusion microthermometry. Then, the initial Cu‐Fe sulfide mineral assemblage is discussed. Bornite and chalcopyrite are major copper ore minerals associated with quartz veinlets. The quartz veinlets have been classified into ‘A’ veinlets associated with bornite, digenite, chalcocite and chalcopyrite, ‘B’ veinlets having chalcopyrite bornite along vuggy center‐line, rare ‘C’ chalcopyrite‐quartz veinlets, and late ‘D’ veinlets consisting of massive pyrite and quartz (Clode et al., 1999). Copper and gold mineralization is associated with abundant ‘A’ quartz veinlets. Abundant fluid inclusions are found in veinlet quartz consisting mainly of gas‐rich inclusions and polyphase inclusions throughout the veinlet types. The hydrothermal activity occurred in temperature‐pressure conditions of aqueous fluid immiscibility into hypersaline brine and dilute vapor. The halite dissolution (Tm[halite]) and liquid‐vapor homogenization (Th) temperatures of the polyphase inclusions in veinlet quartz range from 270 to 472d?C and from 280 to 454d?C, respectively. The estimated salinity ranges from 36 to 47 wt% (NaCl equiv.). The apparent pressures lower than 300 bars are estimated to have been along the liquid‐vapor‐halite curve for the fluid inclusions having the Th lower than the Tm that trapped the brine saturated with halite, or at slightly higher pressure relative to liquid‐vapor‐halite curve for the fluid inclusions having the Th higher than the Tm that trapped the brine unsaturated with halite. The actual temperature and pressure during the hydrothermal activity at the Batu Hijau deposit are estimated to have been around 300d?C and 50 bars. At such temperature‐pressure conditions, the principal and initial Cu‐Fe sulfide mineral assemblages are thought to be chalcopyrite + bornite solid solution (bnss) for the chalcopyrite‐bearing assemblage, and chalcocite‐digenite solid solution and bnss for the chalcopyrite‐free assemblage.     

Evolution of Hydrothermal System at the Dizon Porphyry Cu-Au Deposit, Zambales, Philippines

Abstract. Evolution of hydrothermal system from initial porphyry Cu mineralization to overlapping epithermal system at the Dizon porphyry Cu‐Au deposit in western central Luzon, Zambales, Philippines, is documented in terms of mineral paragen‐esis, fluid inclusion petrography and microthermometry, and sulfur isotope systematics. The paragenetic stages throughout the deposit are summarized as follows; 1) stockwork amethystic quartz veinlets associated with chalcopyrite, bornite, magnetite and Au enveloped by chlorite alteration overprinting biotite alteration, 2) stockwork quartz veinlets with chalcopyrite and pyrite associated with Au and chalcopyrite and pyrite stringers in sericite alteration, 3) stringer quartz veinlets associated with molybdenite in sericite alteration, and 4) WNW‐trending quartz veins associated with sphalerite and galena at deeper part, while enargite and stibnite at shallower levels associated with advanced argillic alteration. Chalcopyrite and bornite associated with magnetite in quartz veinlet stockwork (stage 1) have precipitated initially as intermediate solid solution (iss) and bornite solid solution (bnss), respectively. Fluid inclusions in the stockwork veinlet quartz consist of gas‐rich inclusions and polyphase inclusions. Halite in polyphase inclusions dissolves at temperatures ranging from 360d?C to >500d?C but liquid (brine) and gas (vapor) do not homogenize at <500d?C. The maximum pressure and minimum temperature during the deposition of iss and bnss with stockwork quartz veinlets are estimated to be 460 bars and 500d?C. Fluid inclusions in veinlet stockwork quartz enveloped in sericite alteration (stage 2) consist mainly of gas‐rich inclusions and polyphase inclusions. In addition to the possible presence of saturated NaCl crystals at the time of entrapment of fluid inclusions that exhibit the liquid‐vapor homogenization temperatures lower than the halite dissolution temperatures in some samples, wide range of temperatures of halite dissolution and liquid‐vapor homogenization of polyphase inclusions from 230d?C to >500d?C and from 270d?C to >500d?C, respectively, suggests heterogeneous entrapment of gaseous vapor and hypersaline brine. The minimum pressure and temperature are estimated to be about 25 bars and 245d?C. Fluid inclusions in veinlet quartz associated with molybdenite (stage 3) are dominated by gas‐rich inclusions accompanied with minor liquid‐rich inclusions that homogenize at temperatures between 350d?C and 490d?C. Fluid inclusions in vuggy veinlet quartz associated with stibnite (stage 4) consist mainly of gas‐rich inclusions with subordinate polyphase inclusions that do not homogenize below 500d?C. Fluid inclusions in veinlet quartz associated with galena and sphalerite (stage 4) are composed of liquid‐rich two‐phase inclusions, and they homogenize into liquid phase at temperatures ranging widely from 190d?C to 300d?C (suggesting boiling) and the salinity ranges from 1.0 wt% to 3.4 wt% NaCl equivalent. A pressure of about 15 bars is estimated for the dilute aqueous solution of 190d?C from which veinlet quartz associated with galena and sphalerite precipitated. In addition to a change in temperature‐pressure regime from lithostatic pressure during the deposition of iss and bnss with stockwork quartz veinlets to hydrostatic pressure during fracture‐controlled quartz veinlet associated with galena and sphalerite, a decrease in pressure is supposed to have occurred due to unroofing or removal of the overlying piles during the temperature decrease in the evolution of hydrothermal system. The majority of the sulfur isotopic composition of sulfides ranges from ±0 % to +5 %. Sulfur originated from an iso‐topically uniform and homogeneous source, and the mineralization occurred in a single hydrothermal system.