格列菲列岛的地质地球物理研究

本文是中、韩国际合作项目“黄海地质地球物理场特征研究”的一部分 .具体研究了格列菲列岛的基础地质问题及地球物理场特征 .格列菲列岛是由三个小岛组成的位于黄海中部的一组群岛 ,位于朝鲜半岛布格重力异常正值区 ,莫霍面埋深在 2 9km左右 .三个岛屿主要由安山集块岩构成 .安山集块岩是由大小不同的火成岩碎块和熔岩混合而成 .火成岩的碎块成分主要为石英岩、片岩、片麻岩、玄武岩、安山岩和流纹岩 .主要节理方向为NE10°～NE2 0°,倾角近乎垂直 ;另一组节理为NW70°～NW80° ,倾角也近垂直 .本研究为我们了解这个地区的基础地质情况 ,岩石物性和随后进行的黄海海域典型剖面的地球物理物性反演工作以及地质模型的建立 ,打下重要基础 .     

类石材料--灰泥的冻融过程

Serious failure on the slope of rock ground can be caused by a cyclic action of freezing and thawing in the cold regions. The frost susceptibility and the effect of freezing and thawing onthe rock material, however, have not been well investigated. In order to find out the freezing effect on the rock materials, mortar specimens are frozen as a pseudo-rock material under the constant rate of freezing by means of controlling the temperature of both ends of specimen. The freezing process is given one-dimensionally to the cylindrical samples in the laboratory to simulate the in-situ freezing phenomena in the natural ground. Formation of ice lens, frost heave and water intake during freezing process are observed on the mortar specimen under constant freezing rate, which probably causes cracks or large deformation in the real rock ground. The values of the velocity of elastic wave propagation are compared before and after freezing process to estimate the degree of weathering due to freezing and thawing.     

A brief comparison of lava flows from the Deccan Volcanic Province and the Columbia-Oregon Plateau Flood Basalts: Implications for models of flood basalt emplacement

The nature and style of emplacement of Continental Flood Basalt (CFB) lava flows has been a matter of great interest as well as considerable controversy in the recent past. However, even a cursory review of published literature reveals that the Columbia River Basalt Group (CRBG) and Hawaiian volcanoes provide most of the data relevant to this topic. It is interesting to note, however, that the CRBG lava flows and their palaeotopographic control is atypical of other CFB provinces in the world. In this paper, we first present a short overview of important studies pertaining to the emplacement of flood basalt flows. We then briefly review the morphology of lava flows from the Deccan Volcanic Province (DVP) and the Columbia-Oregon Plateau flood basalts. The review underscores the existence of significant variations in lava flow morphology between different provinces, and even within the same province. It is quite likely that there were more than one way of emplacing the voluminous and extensive CFB lava flows. We argue that the establishment of general models of emplacement must be based on a comprehensive documentation of lava flow morphology from all CFB provinces.     

An original semi‐discrete approach to assess gas conductivity of concrete structures

For civil engineering structures with a tightness role, structural permeability is a key issue. In this context, this paper presents a new proposition of a numerical modelling of leakage rate through a cracked concrete structure undergoing mode I cracking. The mechanical state of the material, considered in the framework of continuum mechanics based on finite element modelling, is described by means of the stress‐based nonlocal damage model which takes into account the stress state and provides realistic local mechanical fields. A semi‐discrete method based on the strong discontinuity approach to estimate crack opening is then considered in the post‐treatment phase. Using a Poiseuille's like relation, the coupling between the mechanical state of the material and its dry gas conductivity is performed. For validation purposes, an original experimental campaign is conducted on a dry concrete disc loaded in a splitting setup. During the loading, gas conductivity and digital image correlation analysis are performed. The comparison with the 3D experimental mechanical global response highlights the performance of the mechanical model. The comparison between crack openings measured by digital image correlation and estimated by the strong discontinuity method shows a good agreement. Finally, the results of the semi‐discrete approach coupled with the gas conductivity compared with experimental data show a good estimation of the structural conductivity. Consequently, if the mechanical problem is well modelled at the global scale, then the proposed approach provides good estimation of gas conductivity. Copyright © 2016 John Wiley & Sons, Ltd.     

新疆北天山巴音沟蛇绿岩的地质特征

巴音沟蛇绿岩虽受强热构造作用肢解,但仍保存有较完整的蛇纹石化超基性岩、状层辉长岩、基性熔岩(下部块状、上部枕状)和放射虫硅质岩的层序组合。岩石化学、地球化学、放射虫等古生物资料表明,它代表一个中石炭世陆缘海盆迅速扩张形成的洋壳和上地幔的残片。其侵位发生在中石炭世未海盆的封闭期间。     

Volcanic hazards in the surroundings of Pico de Orizaba,eastern Mexico

Volcanic hazards from Pico de Orizaba volcano are presented here tor the first time. Some 1.3 million people live within the hazard zone, which in the most severe case would encompass the Mexican Gulf coast, east of the volcano. Three major cities located in the eastern part of the hazard zone account for 800 000 of this population and about 200 000 people live within a 20 km radius of the volcano. Probability calculations are presented as an attempt to quantify the hazards in the surroundings of the volcano. Such quantification can be of use in planning for future land use within the hazard zones.A zone of about 10 km radius centred on the top crater is a high hazard zone for gravity-driven flows and fallout ejecta. For large volume eruptions, the radius could be extended to 120 km to the east and 60 km to the west. The asymmetrical distribution is related to the topography of the volcano. Hazards from Pyroclastic-fall deposits are principally to the west of the volcano, since easterly winds are dominant in the area lava-flow hazards are greatest within a 10 km radius from the summit crater. Pyroclastic flow hazards are high up to 20 km from the volcano summit.In the case of reactivation of the volcano, melting of a glacier covering the summit of Pico de Orizaba having a volume equivalent to some 45 × 10⁹ litres of water, would produce lahars which would descend the flanks of the volcano.     

Origin and stratigraphy of phreatomagmatic deposits at the Pleistocene Sinker Butte Volcano, Western Snake River Plain, Idaho

Sinker Butte is the erosional remnant of a very large basaltic tuff cone of middle Pleistocene age located at the southern edge of the western Snake River Plain. Phreatomagmatic tephras are exposed in complete sections up to 100 m thick in the walls of the Snake River Canyon, creating an unusual opportunity to study the deposits produced by this volcano through its entire sequence of explosive eruptions. The main objectives of the study were to determine the overall evolution of the Sinker Butte volcano while focusing particularly on the tephras produced by its phreatomagmatic eruptions. Toward this end, twenty-three detailed stratigraphic sections ranging from 20 to 100 m thick were examined and measured in canyon walls exposing tephras deposited around 180° of the circumference of the volcano.Three main rock units are recognized in canyon walls at Sinker Butte: a lower sequence composed of numerous thin basaltic lava flows, an intermediate sequence of phreatomagmatic tephras, and a capping sequence of welded basaltic spatter and more lava flows. We subdivide the phreatomagmatic deposits into two main parts, a series of reworked, mostly subaqueously deposited tephras and a more voluminous sequence of overlying subaerial surge and fall deposits. Most of the reworked deposits are gray in color and exhibit features such as channel scour and fill, planar-stratification, high and low angle cross-stratification, trough cross-stratification, and Bouma-turbidite sequences consistent with their being deposited in shallow standing water or in braided streams. The overlying subaerial deposits are commonly brown or orange in color due to palagonitization. They display a wide variety of bedding types and sedimentary structures consistent with deposition by base surges, wet to dry pyroclastic fall events, and water saturated debris flows.Proximal sections through the subaerial tephras exhibit large regressive cross-strata, planar bedding, and bomb sags suggesting deposition by wet base surges and tephra fallout. Medial and distal deposits consist of a thick sequence of well-bedded tephras; however, the cross-stratified base-surge deposits are thinner and interbedded within the fallout deposits. The average wavelength and amplitude of the cross strata continue to decrease with distance from the vent. These bedded surge and fall deposits grade upward into dominantly fall deposits containing 75–95% juvenile vesiculated clasts and localized layers of welded spatter, indicating a greatly reduced water-melt ratio. Overlying these “dryer” deposits are massive tuff breccias that were probably deposited as water saturated debris flows (lahars). The first appearance of rounded river gravels in these massive tuff breccias indicates downward coring of the diatreme and entrainment of country rock from lower in the stratigraphic section. The “wetter” nature of these deposits suggests a renewed source of external water. The massive deposits grade upward into wet fallout tephras and the phreatomagmatic sequence ends with a dry scoria fall deposit overlain by welded spatter and lava flows.Field observations and two new ⁴⁰Ar–³⁹Ar incremental heating dates suggest the succession of lavas and tephra deposits exposed in this part of the Snake River canyon may all have been erupted from a closely related complex of vents at Sinker Butte. We propose that initial eruptions of lava flows built a small shield edifice that dammed or disrupted the flow of the ancestral Snake River. The shift from effusive to explosive eruptions occurred when the surface water or rising ground water gained access to the vent. As the river cut a new channel around the lava dam, water levels dropped and the volcano returned to an effusive style of eruption.     

Magnetic petrology of the 1991–1995 dacite lava of Unzen volcano,Japan: Degree of oxidation and implications for the growth of lava domes

To understand the oxidation state and process of oxidation of lava domes, we carried out magnetic petrological analyses of lava samples obtained from domes and block-and-ash-flow deposits associated with the 1991–1995 eruption of Unzen volcano, Japan. As a result, we recognize three different types of magnetic petrology, each related to deuteric high-temperature oxidation during initial cooling. Type A oxides are characterized by homogenous titanomagnetite and titanohematite, indicating a low oxidation state and high titanomagnetite concentrations. Type B oxides are weakly exsolved and contain titanohematite laths and rutile lenses, indicating a higher oxidation state. Type C oxides, which represent the highest oxidation state, are completely exsolved and composed of Ti-poor titanomagnetite, titanohematite, rutile, and pseudobrookite, indicating high hematite concentrations. Some grains in Types A and B show indications of reduction, which was related to interaction with volcanic gases subsequent to high-temperature oxidation. In terms of geological occurrence, the oxidation processes probably differed for endogenous and exogenous domes. Endogenous dome lavas are oxidized concentrically and are classified into the three types according to their location within the dome: samples from the surface are strongly oxidized and classified as Type C, while the inner part is unoxidized and classified as Type A. Exogenous dome lavas are unoxidized and assigned to Type A. Some samples show signs of reduction, which may have occurred around fumaroles. We propose that location within the dome and the process of dome growth are the factors that control oxidation.