The concentration and distribution of different mercury species in the water columns and sediment of Aha Lake

In order to find out whether Aha Lake was polluted by the acid mining waste water or not, the concentration and distribution of different mercuryspecies in the water columns and sediment profile collected from Aha Lake were investigated. It was found that discernible seasonal variation of different mercury species in water body were obtained in the Aha Reservoir. With regards to the whole sampling periods, the concentrations of HgP in the Aha Reservoir water body were evidently correlated to the concentrations of total mercury, showing that total mercury was mostly associated with particle mercury. The concentrations of methylmercury in water body were also evidently correlated to the concentrations of dissolved mercury. The dissolved mercury evidently affects the distribution and transportation of methylmercury. However, there is no correlation between methylmercury and total mercury. The dissolved mercury, reactive mercury, dissolved methylmercury levels in the water body of high flow period were much higher than those in low flow period. The distribution, speciation and levels of mercury within the Aha Reservoir water body were governed by several factors, such as the output of river, the release of sediment . Discernible seasonal variation of total mercury and methylmercury in porewater was described during the sampling periods, with the concentrations in high flow period generally higher than those in low flow period. The methylmercury in pore water column was evidently correlated to that of the sediment. The results indicated that highly elevated MeHgD concentrations in the porewater were produced at the depths from 2 to 5 cm in the sediment profile, and decreased sharply with depth. A positive correlation has been found between MeHgD formation and sulfate reducing bacterial activity. These highly elevated concentrations of MeHgD at the intersurface between waters and sediments suggest a favorable methylation condition. Moreover,     

Boron isotopic geochemistry of karst groundwater in Guiyang City, China

Boron has two stable isotopes （^10B and ^11B） with relative abundances of about 20% and 80%, respectively. Boron isotopic ratios in natural materials show a huge range of variations, from -70‰ to ＋60‰, when expressed with the classical δ^11B notation. Most of these isotopic variations occur at the surface of the Earth. Hence, boron isotopic composition can be used as a sensitive tracer in geochemical study, for instance, to identify the different sources of contamination and factors controlling the salinity of groundwater. During the last decade, boron isotopes have been used to discriminate between the influences of seawater intrusion and anthropogenic discharge. But few of those researches can precisely identify the different sources of contamination. We measured the boron concentrations and boron isotopic ratios of groundwater samples collected in Guiyang City, as well as the major ions. The results indicate that the major ion composition of the groundwater in the investigated area is mainly controlled by the interactions between water and the dominant rock i.e. carbonates. All the water compositions are characterized by high concentrations of Ca^2＋, Mg^2＋, HCO3^-, SO4^2-, and NO3^-, which are the dominant contaminants. Both dissolved boron concentrations and isotopic ratios show large variations among the ground waters, from 2 μg/L to 90 μg/L and from -6‰ to ＋26‰, respectively. The boron concentrations and isotopic ratios indicate that the river across the studied city has been seriously contaminated by urban discharge. Boron concentrations of fiver water samples varied from 20 μg/L to 140 μg/L, with an average δ^11B value of ＋2.0‰. Using boron isotopic compositions and different geochemical indices allowed us to clearly identify and distinguish the two major sources of contamination, agricultural activity and urban wastewater. Both of the two sources are characterized by high boron concentrations but their boron isotopic compositions significantly differ.     

Occurrence of microorganic pollutants in the atmosphere of Singapore during haze and non-haze periods

Microorganic pollutants such as polycylic aromatic hydrocarbons （PAHs）, organochlorine pesticides （OCPs）, polychlorinated biphenyls （PCBs） and total petroleum hydrocarbons （TPHs） are known to be present in urban ambient air. These organic compounds are prone to atmospheric transport and deposition over long distances, thus enabling them to accumulate even in regions remote from their sources. Deposition from the atmosphere can be via direct deposition and exchange with crops that may be directly or indirectly ingested by humans. It can also take place via wet and dry deposition and air-water exchange. Following their deposition, these microorganic pollutants tend to accumulate in soils, sediments and in human and ecological food chains. There are many reports in the literature on the atmospheric concentrations of microorganic pollutants, but there are few reports and data in Asia. This study was performed in Singapore to determine the relative amounts of persistent organic pollutants and TPHs in ambient aerosols. One of the important sources of these organic compounds in Southeast Asia is thought to be biomass burning （vegetation fires）. Hence, air sampling was conducted during both smoke haze and non-haze periods. The data obtained from this study will be presented and discussed.     

Effects of human activities on mercury in the environment in Xi＇an area, China

Effects of mercury on ecosystems and human health are well documented. Human activities have significant impacts on transport, transformation, and fate of mercury in the natural environment. In this study, a gold mining area （Tongchuan）, an urban area （Xi＇an）, and a historical site （Qinshihuan Tomb） in Shaanxi Province, China, was chosen to study the effects of human activities on the transport, transformation, and fate of mercury in the area. Samples of atmospheric precipitate, soil, sediment, pomegranate, corn and those from wells and the rivers that flow through or flow by the city and from the mining area were collected. The EPA methods were used for sample preparation and analysis of these samples. These methods combine acid digestion, chemical reduction, purge and trap with Cold Vapor Atomic Fluorescence Spectrometry （CVAFS）. Preliminary results showed high total mercury concentrations in the water samples collected from a river in Tongguan County. The total mercury concentrations ranged from 133 to 188 ng/L in the water samples collected from the rivers flowing through Xi＇an City. The amount of total mercury in the soil/sediment samples which were collected in the vicinity of Xi＇an ranged from 31.8 to 83.2 ng/g. The total mercury concentrations in the samples of atmospheric precipitate （including rain and snow collected from Sep. 2005 to Jan. 2006） ranged from 106-298 ng/L.     

Total gaseous mercury emissions from mercury-enriched soil in Guizhou, China

Guizhou is located in the Circum-Pacific Global Mercuriferous Belt, and mercury concentrations in soil in this area are enriched. In-situ total gaseous mercury （TGM） exchange fluxes between air and soil surface were intensively measured at four sampling sites in Guiyang from 21 May to 16 June, 2003, and five sites in the Lanmuchang mercury mining area in December 2002 and May 2003, respectively. The in-situ Hg flux measurement was conducted with a dynamic flux chamber （DFC） of quartz. Overall, net emissions were obtained from all sampling sites. Soil mercury concentration and solar radiation have been proved to be the two most important parameters to control mercury emissions from soil. Meanwhile, rain events can enhance mercury emission rate significantly.     

Heavy metals in freshly deposited sediments of the river Subernarekha, India: an example of lithogenic and anthropogenic effects

Heavy metal distribution patterns in river sediments aid in understanding the exogenic cycling of elements as well as in assessing the effect of anthropogenic influences. In India, the Subernarekha river flows over the Precambrian terrain of the Singhbhum craton in eastern India. The rocks are of an iron ore series and the primary rock types are schist and quartzite. One main tributary, the Kharkhai, flows through granite rocks and subsequently flows through the schist and quartzite layers. The Subernarekha flows through the East Singhbhum district, which is one of India’s industrialised areas known for ore mining, steel production, power generation, cement production and other related activities. Freshly deposited river sediments were collected upstream and downstream the industrial zone. Samples were collected from four locations and analysed in <63-μm sediment fraction for heavy metals including Zn, Pb, Cd and Cu by anodic stripping voltammetry. Enrichment of these elements over and above the local natural concentration level has been calculated and reported. Sediments of the present study are classified by Muller’s geo-accumulation index (I _geo) and vary from element to element and with climatic seasons. During pre-monsoon period the maximum I _geo value for Zn is moderately to highly polluted and for Cu and Pb is moderately polluted, respectively, based on the Muller’s standard. Anthropogenic, lithogenic or cumulative effects of both components are the main reasons for such variations in I _geo values. The basic igneous rock layer through which the river flows or a seasonal rivulet that joins with the main river may be the primary source for lithogenic components.     

Distribution of cadmium, chromium, copper, lead and zinc in marine sediments in Hong Kong waters

Partitioning of heavy metals (Cd, Cr, Cu, Pb, Zn) in marine sediments collected from various sites in Hong Kong waters were determined using sequential extraction method. Sediments from Kellette Bank, located in Victoria Harbour, had higher metal concentrations especially Cu and Zn than most other sites. Slightly over 20% of total Cu and Cr existed as readily available forms in Peng Chau and Kellette Bank. At most sampling sites, over 15% of the Cu existed as the exchangeable form indicating that Cu could be readily released into the aqueous phase from sediments. A significantly higher percentage of Pb and Zn was associated with the three non-residual fractions. Hence, there is a greater environmental concern for remobilization of Pb and Zn compared with Cr. The high amount of residual Cd (>50%) and the relatively lower Cd content indicate that little environmental concern is warranted for the remobilization of Cd. Distribution of metals in sediments collected from different depth at Kellette Bank shows that metal concentrations decreased with profile depth. The levels of Pb and Zn associated with the two readily available fractions increased sharply in the surface sediment. These metals represented the pollutants, which were introduced into the area in the mid-eighties through early nineties as a result of rapid economic and industrial development in the territory. As significant portions of these metals were bound to the readily available phases in the surface sediments, metal remobilization could be a concern. An erratum to this article can be found at     

Risk assessment of groundwater pollution using sensitivity analysis and a worst-case scenario analysis

This paper illustrates how sensitivity analysis and a worst-case scenario analysis can be useful tools in risk assessment of groundwater pollution. The approach is applied to a study area in Hungary with several known groundwater pollution sources and nearby drinking water production wells. The main concern is whether the contamination sources threaten the drinking water wells of the area. A groundwater flow and transport model is set up to answer this question. Due to limited data availability, the results of this model are associated with large uncertainty. Sensitivity analysis and a worst-case scenario analysis are applied to estimate this uncertainty and build confidence in the model results.