秦祁接合带造山缝合带磁组构特征及其构造意义

结合构造及磁化率各向异性研究详细解剖了秦祁接合带唐藏—关子镇—武山和新阳—元龙造山缝合带的应变及岩组特征.41个采点168个构造岩样品的平均磁化率全部较低,磁化率椭球形态分析表明其以平面和压扁应变为主,磁化率各向异性度普遍较高,属强变形岩石组构类型,结合野外观察认为其与变形强度明显正相关.此外,磁化率各向异性参数T、P′可能受岩石类型一定程度的影响.磁化率椭球主轴方位与变形密切相关,提供了丰富的岩组信息.两构造带具有类似的岩组特征,磁面理大致分为呈共轭形态的两组,暗示高应变剪切带在平面上可能以网格状形态出露;高倾伏角磁面理与占优势的低倾伏角、近水平磁线理表明了构造带明显的走滑特征,部分高角度磁线理可能与构造带的挤压和（或）转换挤压相关;磁组方法不能简单用于判别复杂强变形带的运动指向,糜棱面理的复杂变化及Kmin与构造带夹角过高使其判别结果意义不明,而野外及显微构造观察都表明了构造带的右行走滑特征.上述结果表明,沿缝合带大规模的右行转换挤压形成了秦祁接合带反“S”型的平面构造形态,暗示在南北板块拼合过程中,西秦岭诸中、小块体一定程度的向西挤逸.     

Structures caused by repeated freezing and thawing in various loamy sediments: A comparison of active,fossil and experimental data

In this paper, the authors present the results of both macroscopic and microscopic investigations on structure development created by repeated ice lensing in various loamy experiments. Experimental data are compared with observations performed on active forms in High Arctic and Alpine Mountain environments. Those observations are also compared with phenomena observed in fossil periglacial formations of Western Europe. Platy and short prismatic structure formation is bonded to the hydraulic and thermal conditions during ice segregation. When a long series of alternating freezing and thawing affects platy structures, the fabric evolves, also being influenced by slope and drainage conditions: cryoturbations, frostcreep, and gelifluction can appear. They are characterized by specific microfabrics which are better developed with an increasing number of cycles: this is clear in experiments where hydraulic and thermal parameters are better controlled. Vesicles are also a prominent characteristic of the surface horizon in experiments and arctic soils. The genesis of vesicles is discussed on the basis of new observations and is related to the mechanical collapse of frost-created aggregates under the mechanical work of soil air escape during soil saturation by water at thaw.     

Effects of fabric anisotropy on elastic shear modulus of granular soils

The fabric anisotropy of a granular soil deposit can strongly infl uence its engineering properties and behavior. This paper presents the results of a novel experimental study designed to examine the effects of fabric anisotropy on smallstrain stiffness and its evolution with loading on the elastic shear modulus of granular materials under a K0 condition. Two primary categories of fabric anisotropy, i.e., deposition-induced and particle shape-induced, are investigated. Toyoura sand deposits with relative densities of 40% and 80% were prepared using deposition angles oriented at 0o and 90o. Piezoelectric transducers were used to obtain the elastic shear modulus in the vertical and horizontal directions(Gvh and Ghh). The measurements indicate distinct differences in the values of G with respect to the different deposition angles. Particle shapeinduced fabric anisotropy was examined using four selected sands. It was concluded that sphericity is a controlling factor dominating the small-strain stiffness of granular materials. The degree of fabric anisotropy proves to be a good indicatorin the characterization of stress-induced fabric evolution during loading and unloading stress cycles. The experimental data were used to calibrate an existing micromechanical model, which was able to represent the behavior of the granular material and the degree of fabric anisotropy reasonably well.     

Particle fabric in a small, type-2 ignimbrite flow unit (Laacher See, Germany) and implications for emplacement dynamics

 Ignimbrites of the 13-ka Upper Laacher See Tephra were deposited from small, highly concentrated, moderately fluidized pyroclastic flows. Their unconsolidated nature, and the prominence of accidental Devonian slate fragments, make these ignimbrites ideal for clast fabric studies. The upper flow unit of ignimbrite M14 has characteristics typical of a type-2 ignimbrite. Layer 2a and the lower part of layer 2b of the flow unit have strong, upstream-inclined a[p] fabrics (a[p] means long particle axes parallel to flow direction). Only clasts with a/b axial ratios of 2.5 or greater preserve good a[p] fabrics, whereas the a–b planes of flat fragments dip upstream irrespective of axial ratio. The a-axis fabric becomes weaker, flatter, and more girdle-like in the upper half of layer 2b. At one locality the a-axis fabric appears to rotate 40° up through the flow unit, suggesting either shear decoupling of different levels in the moving flow or unsteadiness effects in a flow depositing progressively at its base. The existence of similarly strong a[p] fabrics in layer 2a and the lower half of layer 2b appears inconsistent with the common interpretation that ignimbrite flow units are emplaced as a plug of essentially non-shearing material (layer 2b) on a thin shear layer (layer 2a), and that the entire flow freezes en masse to form the deposit. The data suggest that, if the flow froze en masse, it was shearing pervasively through at least half its thickness. Another possibility is that the flow unit aggraded progressively from the base up, and that the fabrics record the integrated history of shear directions and intensities immediately above the bed throughout the duration of deposition. Received: 13 February 1997 / Accepted: 4 April 1998     

广东省地方防震减灾工作思路与实践

防震减灾的四个环节,包括地震重点监视防御区的工作和实现全省防震减灾十年目标的任务,最终实施都得依赖市,县地地震工作机构的落实。根据广东省的政治,经济,社会发展以有震情特点,介绍了近两个来地方防震减灾工作的思路与实践,为今后的工作有益的借鉴。     

Application of extended distinct element method with lattice model to collapse analysis of RC bridges

This paper proposes a simple lattice model for collapse analysis of RC bridges subjected to earthquakes by using the extended distinct element method (EDEM). In the model, a concrete element consists of lumped masses connected to one another by springs, and a reinforcement bar is represented by a discrete model or an integrated model. The proposed lattice model is simple but its parameters are reasonably defined. It has fewer element nodes and connecting springs, which will be of benefit by shortening the CPU time. The processes to determine the initial stiffness of concrete and steel springs, the parameters of the constitutive model and the fracture criteria for springs are described. A re‐contact spring model is also proposed to simulate the re‐contact of the concrete after fracture of springs; and a general grid searching method is used to decrease the CPU time for judging re‐contact after fracture. The lattice model is assessed by numerical simulations and experiments. As an application, a damaged single‐column pier subjected to the Kobe Earthquake in 1995 is analysed by EDEM with the proposed model. The simulation results indicate that the proposed model predicts well qualitatively the collapse process of RC bridges. Copyright © 2003 John Wiley & Sons, Ltd.     

单层柱面网壳弹塑性地震反应特征

本文对网壳结构的弹塑性抗震性能进行了探讨。根据结构弹性有限元理论，结合网壳结构受力特点，推导出网壳结构单元的弹塑性矩阵表达式。然后对单层柱面网壳结构的弹塑性地震反应进行了具体分析，给出了节点位移和杆件应力变化规律，并讨论了矢跨比变化对网壳弹塑性性能的影响，从而揭示出这类网壳的弹塑性地震反应特点。     

Origin of layering in cumulate gabbros in the Oman ophiolite: Insights from magnetic susceptibility measurements in the Wadi Sadm area

Abstract   Magnetic susceptibility and the anisotropy of magnetic susceptibility were measured on an 800-cm-thick succession of cumulate gabbro in the Sadm area of the Oman ophiolite. The section contained three distinct cumulate units. The susceptibility tends to decrease upward in each from a melanocratic layer (several tens of centimeters thick) to a leucocratic layer (a few meters thick). The susceptibility decreases in accordance with the decreasing number of magnetite grains, which are the alteration product mainly of olivine minerals. This suggests the cyclic downward accumulation of olivine in the cumulate gabbro. The apparent strain deduced from the patterns of magnetic and grain fabrics was the result mostly of simple shear, so that the layering of gabbro is understood to be formed primarily by a crystal cumulus process followed by simple shear deformation.     

THE STUDY OF HIGH EFFICIENT AgI PYROTECHNICS AND THEIR NUCLEATING PROPERTIES*

Two kinds of high efficient Agl pyrotechnics BR-88-5 and BR-91-Y have been developed.The tests in the cloud chamber show that the AgI ice nucleating effectiveness can reach up to 10¹⁵/g,and the BR-91-Y has even higher ice nucleating rate.Two kinds of foreign AgI pyrotechnics have been made according to the given formulations and also tested in the cloud chamber for comparison.X-ray diffraction analysis for the aerosols produced by burning BR-91-Y shows that AgI in acrosols still retains the hexagonal crystal form and the lattice parameters are smaller than those of pure AgI and other AgI composite nuclei,and closer to ice.Combining with the other tests,the reasons for the high efficiency of BR-91-Y have been discussed.     

黔中乌当盆地阶地沉积特征及其对盆地演化的指示

黔中乌当盆地是贵州省山间盆地的典型代表,四级河流阶地清晰地记录了新构造运动中区域地壳抬升和盆地演化。通过阶地沉积物砾组统计、粒度分析、光释光（OSL）测年,探讨盆地的发育和演化。结果显示,阶地砾石排列指示盆地水系古流向与现代河流基本一致,砾石磨圆度变化大,分选较差,岩性继承了区域地层。砾石组合特征反映了构造抬升期盆地内强烈的冲刷剥蚀。漫滩沉积物粒度表明盆地在稳定阶段河流水动力整体呈增大趋势。T4和T3发育阶段区域以冲刷剥蚀为主并塑造了盆地雏形。T2阶地沉积特征及测年结果（177.4 ka~87.6 ka）表明中更新世末期持续数万年的沉积夷平作用使盆地基本成型。T1阶地形成时代约25ka,指示了黔中地区最近一次构造抬升和盆地的最终定型。