北极地区地质构造及主要构造事件

北极地区范围很广,北极圈面积达2 100×10⁴ km²,区域地质复杂。通过对北极地区区域地质编图,笔者认为前寒武纪主要由波罗的、劳伦和西伯利亚三大克拉通,以及其间的微板块或地块组成。主要造山带包括新元古代-早寒武世的贝加尔造山带、晚志留世-早石炭世的加里东造山带、晚古生代-早中生代的海西造山带、晚中生代的上扬斯克造山带、新西伯利亚造山带与楚科奇-布鲁克斯造山带。根据北极地区区域地质构造特征,显生宙以来经历的构造事件大致包括:新元古代-早寒武世的贝加尔运动,致使波罗的古陆与斯瓦尔巴-喀拉地块碰撞造山;晚泥盆世-早石炭世的加里东运动,在劳伦古陆周边形成规模巨大的加里东造山带;晚古生代的海西运动,波罗的古陆与西伯利亚古陆的碰撞造山形成海西造山带;北极阿拉斯加-楚科奇微板块裂离加拿大边缘,侏罗纪加拿大海盆开始张开;早白垩世,阿拉斯加-楚科奇微板块继续与西伯利亚碰撞,阿纽伊洋(Anyui Ocean)消亡,形成上扬斯克-布鲁克斯造山带。受北极调查程度影响,许多问题有待进一步研究。     

内蒙古京格斯台晚石炭世碱性花岗岩年代学及地球化学特征——岩石成因及对构造演化的约束

京格斯台碱性花岗岩出露于内蒙古东乌旗西北部的中蒙边境一带,是准噶尔-南蒙古-内蒙古碱性花岗岩带的一部分,为一套含钠铁闪石碱性花岗岩类。锆石LA-MC-ICPMS U-Pb测年获得了301.3±1.5Ma(n=21,MSWD=1.3)的年龄,表明侵位时代为晚石炭世。全岩地球化学分析显示样品具有高SiO2(75.16%~76.96%)、高碱(K2O=4.61%~5.04%,Na2O=3.98%~4.24%)、贫CaO(0.08%~0.25%)、MgO(0.07%~0.1%),低FeOt(1.05%~2.05%),高的FeOt/MgO比值(12.85~29.66),属于弱过铝质系列;富集Rb、Th、U、K等大离子亲石元素及Zr、Hf等高场强元素,弱亏损Nb、Ta,强烈亏损Ba、Sr、P、Ti等;稀土元素总量较低[ΣREE范围为(70.19~193.93)×10~(-6),平均值为126.82×10~(-6)],轻稀土略富集,具有明显的Eu负异常(δEu=0.03~0.07),呈类似"海鸥"型稀土配分模式。岩石学及地球化学特征表明京格斯台碱性花岗岩属于碱质A型花岗岩。锆石原位Hf同位素和全岩Nd同位素分析显示其具有亏损的Hf-Nd同位素组成εHf(t)和εNd(t)均为正值,Hf地壳存留模式年龄范围为385~1605Ma,并且多数集中于600~900Ma,二阶段Nd模式年龄范围为582~650Ma,这表明源岩为幔源新生地壳物质,代表了新元古代一次地壳增生。综合岩石学、岩石地球化学和同位素地球化学数据,我们认为京格斯台碱性花岗岩是由新生地壳,在晚石炭世贺根山洋闭合后的后造山伸展阶段,在上涌软流圈的加热及减压作用下部分熔融形成的,形成于后造山构造环境。     

Geology,geochronology and fluid characteristics of the Pingqiu gold deposit,Southeastern Guizhou Province,China

The junction of the southeastern Guizhou, the southwestern Hunan, and the northern Guangxi regions is located within the southwestern Jiangnan orogen and forms a NE-trending ∼250 km gold belt containing more than 100 gold deposits and occurrences. The Pingqiu gold deposit is one of the numerous lode gold deposits in the southeastern Guizhou district. Gold mineralization is hosted in Neoproterozoic lower greenschist facies metamorphic rocks and controlled by fold-related structures. Vein types present at Pingqiu include bedding-parallel and discordant types, with saddle-reefs and their down limb extensions dominating but with lesser discordant types. The major sulfide minerals are arsenopyrite and pyrite, with minor sphalerite, galena, chalcopyrite, and rare pyrrhotite, marcasite, and tetrahedrite. Much of the gold is μm- to mm-sized grains, and occurs as fracture-controlled isolated grains or filaments in quartz, galena, sphalerite, pyrite, and wallrock.Three types of fluid inclusions are distinguished in hydrothermal minerals. Type 1 aqueous inclusions have homogenization temperatures of 171–396 °C and salinities of 1.4–9.8 wt% NaCl equiv. Type 2 aqueous-carbonic inclusions yield final homogenization temperatures of 187–350 °C, with salinities of 0.2–7.7 wt% NaCl equiv. Type 3 inclusions are carbonic inclusions with variable relative content of CO₂ and CH₄, and minor amounts of N₂ and H₂O. The close association of CO₂-rich inclusions and H₂O-rich inclusions in groups and along the same trail suggests the presence of fluid immiscibility. The calculated δ¹⁸O_H2O values range from 4.3‰ to 8.3‰ and δD_H2O values of fluid inclusions vary from −55.8‰ to −46.9‰. A metamorphic origin is preferred on the basis of geological background and analogies with other similar deposit types.Two ore-related sericite samples yield well-defined ⁴⁰Ar/³⁹Ar plateau ages of 425.7 ± 1.7 Ma and 425.2 ± 1.3 Ma, respectively. These data overlap the duration of the Caledonian gold mineralization along the Jiangnan orogen, and suggest that gold mineralization was post-peak regional metamorphism and occurred during the later stages of the Caledonian orogeny.Overall, the Pingqiu gold deposit displays many of the principal characteristics of the Bendigo gold mines in the western Lachlan Orogen (SE Australia) and the Dufferin gold deposit in the Meguma Terrane (Nova Scotia, Canada) but also some important differences, which may lead to the disparity in gold endowment. However, the structural make-up at deposit scale, and the shallow mining depth at present indicate that the Pingqiu gold deposit may have considerable gold potential at depth.     

Mid to late Paleozoic shortening pulses in the Lachlan Orogen,southeastern Australia: a review

In the late Silurian, the Lachlan Orogen of southeastern Australia had a varied paleogeography with deep-marine, shallow-marine, subaerial environments and widespread igneous activity reflecting an extensional backarc setting. This changed to a compressional–extensional regime in the Devonian associated with episodic compressional events, including the Bindian, Tabberabberan and Kanimblan orogenies. The Early Devonian Bindian Orogeny was associated with SSE transport of the Wagga–Omeo Zone that was synchronous with thick sedimentation in the Cobar and Darling basins in central and western New South Wales. Shortening has been controlled by the margins of the Wagga–Omeo Zone with partitioning along strike-slip faults, such as along the Gilmore Fault, and inversion of pre-existing extensional basins including the Limestone Creek Graben and the Canbelego–Mineral Hill Volcanic Belt. Shortening was more widespread in the late Early Devonian to Middle Devonian Tabberabberan Orogeny, with major deformation in the Melbourne Zone, Cobar Basin and eastern Lachlan Orogen. In the eastern Melbourne Zone, structural trends have been controlled by the pre-existing structural grain in the adjacent Tabberabbera Zone. Elsewhere Tabberabberan deformation involved inversion of pre-existing rifts resulting in a variation in structural trends. In the Early Carboniferous, the Lachlan Orogen was in a compressional backarc setting west of the New England continental margin arc with Kanimblan deformation most evident in Upper Devonian units in the eastern Lachlan Orogen. Kanimblan structures include major thrusts and associated fault-propagation folds indicated by footwall synclines with a steeply dipping to overturned limb adjacent to the fault. Ongoing deformation and sedimentation have been documented in the Mt Howitt Province of eastern Victoria. Overall, structural trends reflect a combination of controls provided by reactivation of pre-existing contractional and extensional structures in dominantly E–W shortening operating intermittently from the earliest Devonian to Early Carboniferous.     

滇东南富宁地区基性侵入岩与峨眉山地幔柱存在成因关系吗?——来自1∶5万洞波幅和皈朝幅地质填图的证据

在滇东南富宁地区,出露一系列以辉绿岩为主、含少量辉长辉绿岩和辉绿玢岩的基性侵入岩。根据地球化学、同位素地球化学以及锆石U-Pb年代学等分析结果,前人将这些基性侵入岩视作峨眉山大火成岩省的组成部分,源自峨眉山地幔柱。国内外研究的共识认为,峨眉山地幔柱活动发生于263~252Ma之间,持续时间极短。在开展1∶2.5万大比例尺地质调查与填图(洞波幅和皈朝幅1∶5万地质调查手图)过程中,我们发现,这些基性侵入岩不仅侵入古生代地层,还侵入了富宁县皈朝一带的晚二叠世-中三叠世岛弧玄武安山岩(255~241Ma)以及早-中三叠世地层。这些地质事实表明,富宁地区基性侵入岩的形成时代至少晚于中三叠世Anisian期或更晚,与峨眉山地幔柱活动时代存在很大的时差,岩石类型与组合上也与峨眉山大火成岩省的有很大差异。根据我们填图过程中获得的基本地质事实分析,滇东南富宁地区的基性侵入岩是华南地块与北越地块间的古特提斯分支洋盆闭合、两个地块碰撞造山(即印支造山)后的岩浆活动产物,与峨眉山地幔柱没有成因关系。     

花岗岩浆侵位与结晶固化时差的研究与构造意义:以南岭骑田岭花岗岩基为例

通过对南岭中段骑田岭花岗岩基地质-岩石地球化学特征研究, 判明了该岩基的侵位深度（5.5 km）、围岩温度（196℃）及岩浆初始温度（950 ℃ ）,建立起骑田岭花岗岩基的数学计算模型,计算得出： 骑田岭花岗岩熔体侵位后,其初始温度降低至结晶温度所需的时间（Δt col） 为4.1 Ma;由于结晶潜热释放而使结晶过程延长的时间（Δt L）为2.6 Ma; 由于骑田岭花岗岩基放射性元素含量 （U-15.3×10-6,Th-51.35×10-6,K2O-5.02%）是世界平均花岗岩放射性元素含量（U-5×10-6,Th-20×10-6,K2O-2.66%）的2~3 倍,骑田岭花岗岩浆侵位后产生的放射成因热使结晶过程延长的时间（Δt A） 为35.4 Ma,远长于世界平均花岗岩计算的Δt A（2.93 Ma） 。因此, 骑田岭花岗岩基的岩浆侵位- 结晶固化时差 （Δt ECTD）为42.1 Ma, 结合锆石U-Pb 年龄值（161 Ma）, 通过反演计算得出骑田岭花岗岩基侵位年龄值（t E ）为203.1 Ma,从而为骑田岭花岗岩基属于印支期侵位提供了重要的岩浆动力学佐证。     

Recurrent mesoproterozoic continental magmatism in South-Central Norway

We report U–Pb dates and Lu–Hf isotope data, obtained by LAM-ICPMS, for zircons from metamorphic rocks of the Setesdalen valley, situated in the Telemark block south of the classic Telemark region of southern Norway. The samples include infracrustal rocks from the metamorphic basement, metaigneous rocks and metasediments from the Byglandsfjorden supracrustal cover sequence, and metaigneous rocks which intruded the whole succession. The main crustal evolution took place from 1,550–1,020 Ma, beginning with the emplacement of juvenile tonalitic melts; the contribution of older crustal material increased with time. Around 1,320 Ma, further addition of juvenile material occurred, involving both mafic and felsic melts, metamorphism and deformation. Acid magmas with high FeO*/MgO were intruded at 1,215 Ma, coinciding with underplating elsewhere in South Norway. The period starting at 1,215 Ma is represented by supracrustal rocks, principally metarhyolites with minor mafic material and immature sediments of the Byglandsfjorden Group. The crust generation processes ended with the intrusion of diorites and granodiorites at 1,030 Ma, late in the Sveconorwegian orogeny. Regional processes of metamorphism and deformation (around 1,290 and 1,000 Ma) can be related to the assembly of Rodinia. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

胶东金矿成矿构造背景探讨

在编制1∶50万山东省大地构造相图基础上,通过对大地构造相研究显示：胶东微地块是经多期增生和碰撞而形成的,其漫长的板块构造演化明显具有阶段性。侏罗纪是该区板块构造演化史上的一个重要转换期,构造演化由原来的南、北分异转变为东、西分异,胶东地区NE向新生构造起了主要作用。胶东地区中生代有2次重要的碰撞造山事件,印支造山作用主要表现为扬子板块向华北板块俯冲,形成苏鲁高压-超高压变质带及同造山花岗岩及后造山高碱正长岩;燕山造山作用的大陆动力学环境起源于中亚-特提斯构造域向滨太平洋构造域转化和太平洋板块的俯冲,在胶东地区表现为3次造山和3次伸展。晚侏罗世造山早期玲珑片麻状花岗岩组合是区域构造挤压导致地壳增厚引起地壳重熔的产物,代表了大陆弧花岗岩特征;早白垩世造山中期郭家岭花岗闪长岩-花岗岩组合代表了造山期大陆弧花岗岩的特点;造山晚期伟德山闪长岩-花岗闪长岩-花岗岩组合表现为大陆弧花岗岩,后造山A型崂山晶洞过碱性碱长花岗岩-正长花岗岩组合为大陆造陆隆升花岗岩与后造山花岗岩,代表燕山构造的结束。胶东地区构造-岩浆事件和金矿成矿作用受控于特提斯、古亚洲洋和太平洋三大构造域的相互作用,金矿形成的动力学背景是中生代构造体制转折和岩石圈减薄,起因与太平洋板块向华北板块的俯冲机制有关。     

南盘江盆地中三叠统碎屑锆石地质年代学:物源及其地质意义

南盘江盆地的物源及其构造性质至今尚未取得较为一致的认识。目前主要的观点认为其物源主要来自盆地东南面的云开大山地区,盆地的性质为古太平洋板块俯冲所形成的前陆盆地。本文采用碎屑锆石年代学方法,首次报道该盆地中三叠统碎屑锆石年龄组成,分析了该盆地的沉积物源,并基于物源分析探讨了成盆机制和板块间动力学关系。该盆地中三叠统碎屑锆石年龄组成最主要的特征性的年龄分布在320～250Ma之间,此区间内存在280Ma和250Ma两个峰值。通过与相邻各块体锆石年龄谱对比,本研究认为:(1)南盘江盆地的主要物源区应为古特提斯北缘(华南一侧)的石炭-二叠纪岩浆弧,SongMa构造带可能是三叠纪的缝合线,而不是因Sibumasu板块增生到印支板块而导致的板内活化带;(2)该盆地三叠纪时为古特提斯闭合在华南形成的前陆盆地,与古特提斯沿SongMa带向北俯冲闭合有关,前人认为的南盘江盆地形成于古太平洋板块向西北俯冲作用的观点值得商榷。     

Sedimentary response to the intracontinental orogenic process: insight from the anatomy of a small Mesozoic basin in western Yanshan,northern North China

ABSTRACT

The intra-continental orogeny and tectonic evolution of the Mesozoic Yanshan fold-thrust belt (YFTB) in the northern North China Craton (NCC) have been strongly debated. Here, we focus on the Shangyi basin, located in the centre of the YFTB. An integrated analysis of sedimentary facies, palaeocurrents, clast compositions, and detrital zircon dating of sediments was adopted to determine the palaeogeography, provenance, basin evolution, and intra-continental orogenic process. The Shangyi basin comprises the well-exposed Early–early Middle Jurassic Xiahuayuan Formation and the Longmen Formation, and the Late Jurassic–Early Cretaceous Tuchengzi Formation. Based on the 18 measured sections, five facies associations – including alluvial fan, fluvial, delta, lacustrine, and eolian facies – have been identified and described in detail. The onset of the Shangyi basin was filled with fluvial, deltaic, and lacustrine deposits controlled by the normal fault bounding the northern basin, corresponding to the pre-orogeny. In the Middle Jurassic, the cobble–boulder conglomerates of alluvial fan, as molasse deposits, were compatible with the syn-orogeny of the Yanshan movement, which played a critical role in northern North China and even East Asia. After the depositional break in the Middle–Late Jurassic, the Shangyi basin, controlled by the normal fault present in the north of the basin, re-subsided and quickly expanded southward with thick sedimentation, which is correlative with the post-orogeny. Combined with A-type granites, metamorphic core complexes, mafic dikes, and rift basins of the Late Jurassic–early Early Cretaceous present in the northern NCC and Mongolia, significant extension was widespread in the northern NCC and even in northeast Asia. Moreover, vertical changes of provenance indicate that the Taihang Mountain and the Inner Mongolia palaeo-uplift (IMPU) present at the west and north of the basin, respectively, experienced uplift twice in the Middle–Late Jurassic and Early Cretaceous, resulting in a regional depositional break.